• Send Us a Message
    • Skip to content
    S5200 Big Power Supply IC Samsung Galaxy S10 / S10 Plus | PMIC Repair Part Board Components JPC MOBILE ACCESSORIES

    S5200 Big Power Supply IC Samsung Galaxy S10 / S10 Plus | PMIC Repair Part

    $0.00 - $0.00
    $0.00
    $8.91
    $8.91 - $8.91
    $8.91
    SKU IC-216
    Samsung S10 Motherboard IC

    S5200 Big Power Supply Management IC for Samsung Galaxy S10 / S10 Plus

    Replacement PMIC for professional motherboard-level repair. Tested before shipping.

    ⚡ Power Supply IC
    🔬 BGA Chip
    🔧 Board-Level Repair
    🇦🇺 Brisbane Stock
    ⚠️
    BGA Micro-Soldering Required — Experts Only

    This is a BGA surface-mount IC. Replacement requires a hot air rework station, BGA reballing tools, and a stereo microscope. One mistake can permanently destroy the motherboard. Do not attempt without professional micro-soldering experience.

    What the S5200 PMIC Does

    The S5200 is the main Power Management IC on the S10 motherboard. It controls all power distribution across the device.

    ⚡ Voltage Regulation

    Delivers regulated voltages to the Exynos SoC, display, memory, and cameras. Multiple buck/boost converters run simultaneously.

    🔋 Battery Management

    Works alongside the charging IC to manage power from the battery. Controls how current flows in and out of the cell.

    🌡️ Thermal Management

    Monitors device temperatures. Throttles power delivery when heat exceeds safe thresholds. Prevents thermal damage to the board.

    🔄 Power Sequencing

    Controls the startup and shutdown sequence. Ensures each component receives power in the correct order for safe boot.

    🔌 Power Distribution

    Distributes correct voltages across display, cameras, wireless chips, and peripherals via multiple LDO regulators.

    ✅ Pre-Shipment Tested

    Every unit is tested before dispatch. Consistent quality on every order.

    Signs the S5200 Has Failed

    Diagnose these symptoms before replacing the IC. Confirm the S5200 is the fault before ordering.

    ❌
    Phone completely dead
    Won't turn on. No response to power button or charger.
    ❌
    Charges but won't boot
    Battery shows charge. Phone still fails to start up.
    ❌
    Boot loops
    Phone restarts repeatedly. Never completes the boot sequence.
    ❌
    Random shutdowns
    Turns off suddenly during use. Battery percentage may jump erratically.
    ❌
    Severe overheating
    Excessive heat during charging or normal use. PMIC failing to regulate.
    ❌
    High current, no boot
    DC power supply shows high current draw. Board will not start.
    📍

    Brisbane Technical Hub

    Stocked and shipped from Forest Lake, QLD. Local technician support available.

    📦

    Reliable AU Dispatch

    Ships within 2-4 business days. Australia-wide, secure anti-static packaging.

    ✅

    Tested Before Shipping

    Every unit verified before dispatch. Consistent quality, every order.

    Technical Specifications

    IC Designation S5200 — Big Power Supply Management IC
    IC Type PMIC — Power Management Integrated Circuit
    Package Type BGA — Ball Grid Array (surface-mount)
    Compatibility Samsung Galaxy S10 / S10 Plus
    Primary Function Voltage regulation, power distribution, thermal management
    Mounting Location Main motherboard (logic board)
    Installation Method BGA reflow — hot air rework station required
    Quality Standard Tested before shipping
    Warranty No warranty — professional repair part

    Compatible Samsung Models

    Galaxy S10
    • SM-G973F — International 🇦🇺
    • SM-G973F/DS — Dual SIM
    • SM-G973U — United States
    • SM-G973W — Canada
    • SM-G9730 — China
    Galaxy S10 Plus
    • SM-G975F — International 🇦🇺
    • SM-G975F/DS — Dual SIM
    • SM-G975U — United States
    • SM-G975W — Canada
    • SM-G9750 — China

    Australian S10 and S10+ units are SM-G973F and SM-G975F (Exynos 9820 variants). Find your model: Settings → About Phone → Model Number.

    🔧
    Professional Technician Notes
    • Always disconnect the battery before starting board work.
    • Pre-heat the motherboard to 120–150°C to reduce thermal shock.
    • Check coils and capacitors around the S5200 pads first. Shorted passives will damage a new IC.
    • Use quality flux for clean BGA ball adhesion. Avoid bridging on fine-pitch pads.
    • Test voltage rails after reflow. Confirm correct output before full reassembly.
    • Use a DC power supply to check current draw before inserting the battery.

    Frequently Asked Questions

    What does the S5200 IC do? +
    The S5200 is the main Power Management IC on the S10 motherboard. It regulates voltages across all subsystems. It controls power delivery to the processor, display, memory, cameras, and wireless chips. It also manages the battery, thermal control, and boot power sequencing.
    What causes the S5200 to fail? +
    Common causes include liquid or water damage, voltage spikes from counterfeit chargers, physical impact cracking BGA solder joints, and heat stress from prolonged heavy use. Shorted passive components nearby can also burn out the IC.
    Can I install this myself? +
    Only if you have BGA micro-soldering experience. You need a hot air rework station, BGA reballing tools, a stereo microscope, and flux. This is not a plug-in part. One misaligned ball or excess heat can permanently damage the motherboard. Professional repair technicians only.
    Does it fit both the S10 and S10 Plus? +
    Yes. The S5200 is used on both the Samsung Galaxy S10 (SM-G973) and S10 Plus (SM-G975) motherboards. Both models share this IC. Confirm your board revision before ordering if you are working on an unusual variant.
    How do I confirm the S5200 is the fault? +
    Use a multimeter to test voltage rails around the IC. Use a DC power supply to measure current draw at boot. High current with no boot is a strong indicator. Also check coils and capacitors around the IC pads for shorts. Always rule out the battery and charging IC first.
    What is the reflow temperature for this IC? +
    Typical BGA reflow for this type of IC is 380–420°C at the hot air nozzle. Pre-heat the board to 120–150°C from below first. This reduces thermal shock and prevents board warping. Use a temperature-controlled rework station — never a basic heat gun.
    Why is there no warranty on this part? +
    IC components are sold for professional board-level repair. The outcome depends entirely on technician skill and installation conditions. Parts are tested before shipping to verify function. Once installed, we cannot verify how the part was handled or soldered.
    How fast does JPC Mobile ship across Australia? +
    We ship within 2-4 business days from Forest Lake, Brisbane. All Australian states and territories are covered. IC parts are shipped in anti-static packaging to prevent ESD damage in transit.

    Australia-Wide Shipping

    🚚
    2-4 Business Days
    Brisbane to all states
    ⚡
    Anti-Static Packaging
    ESD-safe packaging on every IC order
    🆓
    Free Shipping
    On orders over $150
    JPC Mobile — Brisbane Board-Level Repair Specialist

    Tested IC. Anti-static dispatch. Serving professional repair technicians across Australia.

    📍 Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078  |  📞 0480 039 913  |  🕐 Mon–Fri 9am–5pm, Sat 10am–5pm

    2-4 Day AU Shipping
    Brisbane Local Hub
    Anti-Static Packed
    Pre-Shipment Tested

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    S5200 Big Power Supply IC Samsung Galaxy S10 / S10 Plus | PMIC Repair Part Board Components JPC MOBILE ACCESSORIES

    S5200 Big Power Supply IC Samsung Galaxy S10 / S10 Plus | PMIC Repair Part

    $8.91