๐ฎ Nintendo Switch Repair Part
Nintendo Switch USB-C Charging Port Connector โ PULL-A Replacement
Restore charging and TV docking ยท PULL-A tested quality ยท HAC-001 V1 & V2 compatible ยท Requires micro-soldering
โก Charging Restored ๐บ Docking Fixed ๐ฌ PULL-A Grade ๐ฆ๐บ 12-Month Warranty
โ
In Stock โ Ships within 2โ4 business days ๐ฆ
JPC Mobile | Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
๐ 0480 039 913
MonโFri 9amโ5pm | Sat 10amโ5pm
โ ๏ธ Professional Micro-Soldering Required
This is NOT a plug-and-play part. Installation requires a hot air rework station, quality flux, and micro-soldering expertise. Incorrect heat or flux application can damage the Switch motherboard permanently. This part is intended for trained repair technicians only.
๐๏ธ
Brisbane Technical Hub
Queensland-based team stocking genuine console repair components. Call 0480 039 913 for technical advice before ordering.
๐ก๏ธ
Authenticity Guaranteed
Genuine PULL-A grade component. Every unit tested before dispatch from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
๐ฆ
Reliable Dispatch
Ships within 2โ4 business days to anywhere in Australia. Repair shops and technicians receive fast, reliable stock delivery.
๐
What This Port Controls
The USB-C port on the Nintendo Switch handles three critical functions: battery charging, power delivery to the dock, and video signal output to your TV via the dock. A damaged port disrupts all three. Replacing it with a tested PULL-A grade connector restores full functionality โ charging, dock power, and HDMI output.
๐ Is This the Right Part? Common Fault Symptoms
A faulty USB-C charging port causes these specific problems on the original Nintendo Switch:
โก Not Charging
Switch shows no charging indicator when plugged in. Battery drains even with charger connected. Port may feel loose or have physical damage.
๐บ Won't Dock to TV
Switch charges via the dock but no picture appears on the TV. HDMI video signal is carried through the USB-C port โ a damaged port breaks video output.
๐ Intermittent Connection
Charging works only at certain angles. Cable needs to be held in position. This is typically a bent or broken internal pin on the USB-C connector.
๐ No Power At All
Switch is completely dead and will not respond to any charger. If the battery is confirmed healthy, the charging port is the next most likely cause.
โ ๏ธ Before ordering, confirm the fault is isolated to the USB-C port and not the M92T36 charging IC or BQ24193 power chip. Call 0480 039 913 if you need help diagnosing before you buy.
๐ง Why This PULL-A Grade Port
PULL-A grade means the component has been harvested, cleaned, and tested โ not a cheap aftermarket copy.
๐ฌ Pre-Tested Quality
Every port is tested before dispatch. Zero defects on pin alignment, power delivery, and video signal continuity.
๐ Accurate Pin Alignment
Correct pin spacing makes soldering cleaner and more reliable. Poor pin alignment is the main cause of failed port replacements.
โก Full Power Delivery
Supports full power delivery spec for the Switch โ fast charging from Nintendo official charger and third-party USB-C PD chargers.
๐บ Video Signal Intact
Carries the full video signal required for TV docking. Restores HDMI output through the dock after a successful port replacement.
๐ฏ OEM-Spec Fit
Designed to original Nintendo Switch HAC-001 board specifications. Sits in the correct footprint for clean solder joints every time.
๐ก๏ธ 12-Month Warranty
Backed by a 12-month warranty on the component. Note: warranty does not cover damage caused during the soldering installation process.
๐ณ Pay your way โ Afterpay and Klarna available at checkout.
โ Frequently Asked Questions
Will replacing the USB-C port fix my Nintendo Switch that won't charge?+
Often yes โ but first confirm the fault is in the port itself and not the M92T36 charging IC or BQ24193 power management chip on the board. If the port is visibly damaged, loose, or has bent pins, replacing it is the correct first step. If the port looks intact and the Switch still does not charge, the fault is likely on the IC chips, not the port. Call 0480 039 913 and we can help you diagnose before you order.
My Switch charges but won't output to the TV โ is this the right part?+
Yes, this is a common fault pattern. The USB-C port carries both the power delivery signal and the video output signal. When internal pins are damaged, charging can continue while video output fails. Replacing the port restores full docking functionality including HDMI output to your TV. This is one of the most common Nintendo Switch repairs we see.
What tools and skills are needed to install this part?+
You need a hot air rework station with fine nozzle control, high-quality flux, solder wick for clean removal of the old port, and experience with surface-mount micro-soldering. This is an advanced repair โ not suitable for beginners. Poor heat control or excess flux contamination can permanently damage the Switch motherboard. If you are not experienced with SMD soldering, take the console to a professional repair shop.
Does this fit the Nintendo Switch Lite or Switch OLED?+
No. This port is specifically for the original Nintendo Switch (HAC-001 V1 and HAC-001(-01) V2). The Switch Lite (HAC-002) and Switch OLED (HEG-001) use different port designs with different board footprints. Check the model number on the back of your console. HAC-001 = compatible. If unsure, call 0480 039 913 before ordering.
What does PULL-A grade mean for this component?+
PULL-A means the component is harvested from a working donor unit, cleaned, and individually tested before sale. It is not a cheap aftermarket replica โ it has correct pin spacing, full signal support, and passes a function test. PULL-A grade parts are the preferred choice for professional repair shops because they have better real-world reliability than low-cost aftermarket alternatives.
What warranty comes with this part?+
This part carries a 12-month warranty on the component itself. Warranty covers manufacturing defects and component failure under normal use. It does not cover damage that occurs during the soldering installation process โ excessive heat, incorrect flux, or board damage from improper technique is outside the warranty scope. If the part arrives faulty or dead on arrival, contact JPC Mobile on 0480 039 913 within 7 days.
Can I buy this part for a repair shop or in bulk?+
Yes. JPC Mobile supplies repair shops and professional technicians across Australia. The Nintendo Switch USB-C port fault is one of the most common console repairs โ stocking this part means faster turnaround for your customers. Call 0480 039 913 or visit Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 to discuss trade pricing and bulk availability.
Should I rule out the charging IC before replacing the port?+
Yes โ and this is important. If the USB-C port looks undamaged and the Switch still does not charge, the M92T36 charging management IC or BQ24193 power chip is the more likely cause. Replacing the port when the IC is at fault will not fix the problem. Use a multimeter to test for continuity and voltage at the port before ordering. If you need help diagnosing, call 0480 039 913 โ we stock the M92T36 and BQ24193 ICs as well.
How do I identify if the port has damaged pins?+
Use a USB-C breakout board or a good quality loupe to inspect the port under magnification. Look for bent pins, corrosion, or debris inside the connector. A USB-C cable that wobbles or sits loosely in the port is also a sign of physical damage. Boards with liquid damage often show pin corrosion first at the USB-C port. If in doubt, call 0480 039 913 before ordering.
How fast does JPC Mobile ship across Australia?+
JPC Mobile ships from Forest Lake, Brisbane within 2โ4 business days. We deliver to every state and territory across Australia โ Sydney, Melbourne, Perth, Adelaide, Darwin, and Hobart. Repair shops and technicians in Brisbane are welcome to visit us in store at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 for same-day counter pickup. Call 0480 039 913 for stock availability.
๐ JPC Mobile Quality Guarantee
Every component at JPC Mobile is sourced and tested for professional repair use. We are a real store in Forest Lake, Brisbane โ not a dropshipper. We stand behind every part we sell.
โ
PULL-A Tested Stock
๐ก๏ธ 12-Month Warranty
๐ฆ 2โ4 Day Dispatch
๐๏ธ Brisbane-Based Team
Questions? Call 0480 039 913 or visit us in store.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
