Yes. This protector is cut and formed to fit the iPhone 13 Mini screen exactly. The 3D curved edges follow the phone's display boundary edge to edge.

It will not fit iPhone 13, 13 Pro, or 13 Pro Max — those are different sizes. The iPhone 13 Mini is the smallest of the 2021 iPhone lineup. Check your model in Settings → General → About → Model Number. Australian units are A2628.

9H refers to the pencil hardness scale — a standard used to measure surface scratch resistance. At 9H, the glass resists scratches from keys, coins, and most everyday objects found in your pocket or bag.

It does not mean the glass is indestructible. A sharp point under high pressure — like a blade or gravel — can still scratch. But for everyday use, 9H provides excellent protection.

AF stands for Anti-Fingerprint. The AF Plasma process applies an oleophobic (oil-repelling) layer to the glass surface. This makes fingerprints and smudges easier to wipe off and harder to stick in the first place.

The coating is rated to 1500 friction cycles — meaning it holds up through 1500 wipes or swipes before the coating starts to degrade. Under normal daily use, this translates to a long-lasting clean surface.

No. At 0.33mm thickness, this glass is very thin. It is designed to preserve the original touch sensitivity of the iPhone 13 Mini screen. You should not notice any difference in touch response.

The 0.28mm Jinzhang AB adhesive bonds directly to the screen without trapping air, which helps maintain consistent touch response across the full display area.

The droplet arc is the curved profile along the edge of the glass. Instead of a sharp flat edge that can lift or chip, the droplet arc creates a smooth downward curve where the glass meets the phone's frame.

This prevents the edges from peeling over time and makes the transition from glass to frame feel smooth when you swipe from the sides of the screen.

Bubbles are caused by dust particles trapped under the glass or by poor alignment. The kit includes an alcohol swab, microfiber cloth, and anti-static dust tape — all designed to give you a clean, dust-free surface before application.

If you follow the three steps (clean, align, press from centre out), bubbles should not be an issue. Most bubbles caused by air — not dust — will disappear on their own within 24 hours.

At ≥91.5% light transmittance, this glass has very high transparency. Most people do not notice any change in brightness or colour accuracy after application.

This protector does not have an anti-glare matte coating, so it will not reduce reflections in bright sunlight. It is a clear high-transparency glass designed to keep your display looking sharp and vivid.

Yes. The notch cutout is precisely matched to the iPhone 13 Mini. Face ID, the front camera, earpiece, and proximity sensor are all uncovered.

Face ID uses infrared sensors that work through properly cut tempered glass. You should not experience any issues with Face ID recognition after installation.

Tempered glass with AB glue adhesive is designed for a single clean application. While it can be removed, the adhesive is not designed for repeated reapplication. Removing and reapplying may reduce bonding strength.

If you need to reapply due to misalignment, do so gently immediately after the first application before the glue fully sets. Once set, treat it as a permanent install.

We dispatch from Brisbane within 2-4 business days. Each order is packed flat to protect the glass in transit.

• Brisbane metro: 1-2 days after dispatch
• Regional QLD: 2-3 days after dispatch
• Sydney / Melbourne: 3-4 days after dispatch