💎 CSG Diamond High-Aluminum Glass

Built from CSG high-aluminum aluminosilicate glass — a triple-strength, 2.5D tempered glass. It is harder and more shatter-resistant than standard soda glass. Scratch tests confirm 9H surface hardness.

🇯🇵 Japan Clear AB Glue (0.1mm)

Japanese AB glue is the industry standard for premium screen protectors. It bonds evenly and cleanly with no bubbles. The 0.1mm adhesive layer keeps total protector thickness minimal and touch sensitivity sharp.

🔬 Daikin OPTOOL AF Plasma Coating

Daikin is a Japanese chemical company known for precision fluoropolymer coatings. Their OPTOOL coating bonds into the glass surface via AF Plasma — not sprayed on. The result is long-lasting oil, water, and smudge repellency with 1500-cycle friction durability.

✋ 2.5D Droplet Arc Edge

The curved Droplet Arc edge profile eliminates the sharp rim of flat-cut protectors. Your thumb slides over it naturally. No catching, no peeling from the edges, and no discomfort during everyday swipes.

💧 Bubble-Free Installation

Japan Clear AB glue self-levels under the glass. The included anti-static dust tape removes airborne particles before application. Install this yourself without bubbles or misalignment.

🖥️ ≥91.5% Transparency

The glass lets through over 91.5% of display light. Colours remain vivid and contrast stays true. The Always-On Display, ProMotion 120Hz, and 2000-nit peak brightness of the iPhone 14 Pro Max all read exactly as intended.

Brisbane Technical Hub

Stocked and shipped from Forest Lake, QLD. Local support when you need it.

Reliable AU Dispatch

Ships within 2-4 business days to all Australian states and territories.

Authenticity Guaranteed

Genuine Kinglas product. Australian Consumer Law protected. Shop with confidence.

🇯🇵 Japan Clear AB Glue

Japanese AB glue cures to a crystal-clear, uniform adhesive layer exactly 0.1mm thick. It distributes evenly across the screen surface. No air pockets, no cloudy patches, no rainbow effect under certain light angles.

🧪 Daikin OPTOOL Coating

Daikin (Japan) manufactures fluoropolymer surface treatments for industry and consumer electronics. Their OPTOOL series creates an omniphobic nano-coating — it repels both water and oil at the molecular level. Water beads and rolls. Fingerprints wipe clean instantly.

⚡ AF Plasma Bond Process

AF Plasma uses a low-temperature plasma arc to fuse the Daikin coating into the glass surface at a molecular level — not just sprayed on top. This creates a dense, chemically bonded layer that survives 1500+ friction cycles without degrading.

💎 CSG Triple-Strength Glass

CSG high-aluminum glass uses a 2.5D triple-strength tempering process. Each pane is chemically strengthened to achieve 9H surface hardness. The aluminosilicate formula resists flex cracking — a common failure point in ordinary tempered glass.

iPhone 14 Pro Max Models

• A2894 — International / Australia, UK, Singapore
• A2651 — United States, Puerto Rico
• A2893 — Canada, Japan, Mexico
• A2896 — China, Hong Kong, Macao

Display Details

• 6.7-inch Super Retina XDR OLED
• 2796 × 1290 pixels at 460 ppi
• ProMotion 120Hz adaptive refresh
• Always-On Display
• 2000 nit peak outdoor brightness

⚠️ Important Notes

• Does NOT fit iPhone 14 Pro (6.1-inch)
• Does NOT fit iPhone 14 standard or Plus
• Does NOT fit iPhone 15 Pro Max
• This protector is cut for the Dynamic Island

This protector is precision-cut for the iPhone 14 Pro Max Dynamic Island cutout. It fits flush around the pill-shaped sensor and camera housing with no overlap or gap.

Clean the Screen

Wipe the screen with the alcohol swab first. Then buff dry with the microfibre cloth. Work in a room without fans or air conditioning to reduce airborne dust.

Remove Dust with Tape

Press the anti-static dust tape firmly onto the screen surface and peel it off. This lifts any remaining dust particles that the cloth may have missed. Repeat until the screen is spotless.

Align Over the Screen

Peel the backing tab from the protector. Align the Dynamic Island cutout carefully with the sensor pill on the top of the phone. Lower slowly from one end. The Japan AB glue self-levels as it adheres.

Press & Finish

Press from the center outward to seat the glass fully. Any small bubbles near the edges will disappear within 24 hours as the AB glue fully cures. Remove the top protective film and you're done.