Pull-A original charging-port flex assembly for the Apple iPhone XS Max in the silver/white colour variant. This reclaimed dock assembly is intended for professional repair of diagnosed Lightning-port, wired-data or lower-microphone faults. The photographed part is marked 821-01415-05.
Key features
- Pull-A reclaimed original part from a donor iPhone
- Lightning charging port, wired data connector and lower microphone flex assembly
- Silver/white port-trim colour for the Silver iPhone XS Max
- Direct-fit flex layout for iPhone XS Max only
- Supplied as one charging-port flex assembly; tools and replacement display adhesive are not included
Compatibility
Fits Apple iPhone XS Max: A1921, A2101, A2102, A2103 and A2104.
Does not fit: iPhone XS, iPhone XR, iPhone X, iPhone 11 Pro Max or other iPhone models. Apple offered the XS Max in Silver, Space Grey and Gold; this silver/white assembly is the colour-matched version for a Silver handset.
When this part may help
- Known-good Lightning cables do not charge or connect reliably
- The cable feels loose after the port has been carefully cleaned
- A computer cannot detect the phone through a known-good data cable
- The lower microphone fault has been traced to the dock flex assembly
Charging symptoms can also be caused by compacted lint, a damaged cable or power adapter, the battery, liquid damage, or board-level faults. Diagnose the device before ordering rather than assuming the port is the cause.
Condition and installation
Pull-A means the part has been removed from a donor device, so minor cosmetic or handling marks may be present. Professional installation is strongly recommended. Disconnect the battery before fitting, handle the flex and connectors carefully, and dry-test charging, wired data and microphone operation before applying new adhesive or sealing the phone.
Opening the iPhone compromises its original seals. New adhesive should be fitted during reassembly, but the original water-resistance rating cannot be guaranteed after repair.
Warranty
Covered by JPC Mobile’s 12-month parts warranty for an electrical fault in the part as supplied. Physical damage, torn flexes, bent connectors, liquid exposure, incorrect installation and faults caused by other device components are excluded. Australian Consumer Law rights also apply.
