Genuine Apple charging-port sensor and microphone flex for iPhone 16 Pro Max
Replace a diagnosed charging-port sensor, pressure-sensor or bottom-microphone fault in an iPhone 16 Pro Max with this genuine Apple PULL-A internal flex module. This is the separate sensor and microphone assembly positioned around the charging-port area. It is not the complete USB-C charging-port flex and it should only be ordered after the failed component has been identified.
PULL-A means the component has been removed from an original Apple iPhone and graded as a reusable genuine part. It is not a newly manufactured aftermarket copy and should not be described as brand new. A genuine pulled component can be a useful choice when original connector layout, fit and integrated sensor functions matter.
Key product details
- Genuine Apple PULL-A charging-port-area sensor flex.
- Includes the pressure-sensor and bottom-microphone functions associated with this module.
- Designed specifically for Apple iPhone 16 Pro Max.
- Compatible with model numbers A3084, A3295, A3296 and A3297.
- Supplier-listed as tested before dispatch.
- Flex module only; the complete USB-C port, phone, tools, adhesive and installation are not included.
- Professional diagnosis and installation are strongly recommended.
- Available to order for delivery across Australia from JPC Mobile - Tech Repair & Accessories.
What is a charging-port sensor flex?
The iPhone 16 Pro Max charging-port sensor and microphone flex is a small internal assembly that sits in the lower area of the phone. Independent parts catalogues identify this module as incorporating a pressure sensor and a bottom microphone. It is separate from the colour-matched USB-C charging-port flex that physically accepts the charging cable and carries power and data connections.
This distinction matters. A customer searching for an iPhone 16 Pro Max charging port may actually need the complete USB-C port, this sensor and microphone module, the charging-port signal antenna, or a board-level repair. The components have different connectors and functions. Compare the photographs with the original part and confirm the diagnosis before ordering.
Compatibility
This iPhone 16 Pro Max charging port sensor flex is intended only for the Apple iPhone 16 Pro Max introduced in 2024. Apple identifies the regional model numbers as A3084, A3295, A3296 and A3297. Confirm the model number and inspect the original module, connector position and mounting points before installation. Similar assemblies for the iPhone 16, iPhone 16 Plus or iPhone 16 Pro are not represented as interchangeable with this part.
The supplier SKU is PULL-CportSersor-16PM. The word “Sersor” is retained in the SKU because it is the exact supplier identifier used to match this product; the customer-facing product name uses the correct spelling “sensor.”
Faults this part may address
This module may be appropriate when testing identifies a fault with the lower microphone, pressure sensor or the sensor flex itself. Possible symptoms can include poor or missing audio from the bottom microphone in functions that use it, damage visible on the flex, a missing module after a previous repair, or a confirmed sensor-related fault. Symptoms should be tested against known-good components and relevant diagnostics wherever possible.
A phone that does not charge is not proof that this sensor flex has failed. Charging problems may be caused by debris in the USB-C connector, a damaged cable or power adapter, the complete charging-port flex, battery condition, corrosion, software behaviour, charging circuitry or a board-level fault. This listing does not promise to repair every charging issue. If the USB-C socket itself is loose, damaged or not transferring power or data, you may need the separate complete charging-port assembly instead.
PULL-A condition explained
This is a genuine Apple component recovered from an original donor device and graded PULL-A for reuse. Because it has previously been fitted, minor signs of removal, handling or adhesive residue may be present. Those signs are consistent with a pulled component and do not make it a newly manufactured part. Product photographs are representative; small visual differences can occur between donor devices or production batches.
Flex cables and their surface-mounted components are delicate. Avoid bending across components, creasing the ribbon, touching contacts, applying uncontrolled heat or pulling on the connector. Damage caused during unpacking, test fitting or installation is not a product defect.
Before ordering
- Confirm that the device is an iPhone 16 Pro Max.
- Verify model number A3084, A3295, A3296 or A3297 where possible.
- Diagnose whether the fault is in the sensor and microphone flex rather than the complete USB-C charging port.
- Compare the listing images with the original module and connector.
- Inspect the board connector, surrounding frame and cable path for secondary damage.
- Check whether adhesive, seals, brackets or other small parts must be transferred or purchased separately.
- Read the warranty conditions before handling or installation.
If the required part is uncertain, ask a qualified repair technician to inspect the phone before purchase. JPC Mobile can help compare clear photographs and device information with the listing, but remote compatibility guidance cannot replace hands-on fault diagnosis.
Installation guidance
Installing this module requires opening the iPhone and working near sensitive internal components. The device should be powered off and the battery disconnected before the part is removed or connected. Correct tools, screw organisation, static-control practices and careful cable routing are essential. Incorrect screw placement, trapped cables, excessive pressure or uncontrolled heat can damage the module, display, battery, charging system or logic board.
Test the replacement before final reassembly when the repair procedure allows. Confirm the relevant microphone and sensor behaviour and check wired charging, data connection, speakers and nearby components that may have been disturbed. Do not permanently seal the phone until the repaired functions have been tested repeatedly.
Opening an iPhone can affect its original water- and dust-resistance. New seals and correct reassembly can reduce risk, but they do not guarantee restoration of the original factory ingress-protection rating. JPC Mobile does not represent that a repaired phone will remain waterproof.
What is included
The package contains one iPhone 16 Pro Max charging-port sensor, pressure-sensor and bottom-microphone flex module in PULL-A condition. The complete USB-C charging-port assembly, external phone, installation labour, repair tools, adhesive, screws, brackets and waterproof seal are not included unless expressly shown and stated otherwise. This is a part-only listing, so the product price is not a phone-repair service price.
Availability and supplier ordering
This part is available to order. JPC Mobile may hold local stock or source the item from an Australian supplier when the Forest Lake shelf quantity is zero. The exact supplier listing was active with stock in both Sydney and Melbourne when checked. Supplier allocation can change before an order is processed; if an unexpected delay occurs, JPC Mobile will contact you with the available options. Orders can be dispatched across Australia.
Warranty and Australian Consumer Law
This product includes a 12-month limited product warranty for covered functional defects. The warranty does not cover physical damage, torn or creased flex cables, damaged connectors, liquid damage, corrosion, incorrect diagnosis, incorrect fitment, misuse, electrical damage, unauthorised modification, damage caused during installation or faults in another phone component. Test the module before final installation and retain the order details.
Our warranty terms do not exclude, restrict or modify rights or remedies that cannot lawfully be excluded under the Australian Consumer Law. You may be entitled to a repair, replacement, refund or another remedy where the law applies. The voluntary warranty stated here operates in addition to those statutory rights.
Why choose JPC Mobile?
JPC Mobile - Tech Repair & Accessories supplies phone parts with clear condition grading, model compatibility and part-only pricing. This listing explains the difference between the complete USB-C charging port and the smaller charging-port-area sensor and microphone flex, identifies the genuine Apple PULL-A condition and gives the exact supported iPhone 16 Pro Max model numbers. Order online for Australia-wide delivery or contact the Forest Lake, Brisbane team for compatibility help.
Frequently asked questions
Is this the complete USB-C charging port?
No. This is the separate sensor, pressure-sensor and bottom-microphone flex module located near the charging-port area.
Is the part brand new?
No. It is a genuine Apple component removed from an original iPhone and graded PULL-A for reuse.
Will it fix an iPhone that does not charge?
Only if diagnosis confirms this module is responsible. Many charging faults require the complete USB-C port, another component or board-level work.
Does it fit the iPhone 16 Pro?
No. This listing is specifically for the iPhone 16 Pro Max and the listed model numbers.
Does the price include installation?
No. The advertised price covers the replacement module only. Installation can be discussed separately.
Can it be ordered with zero local stock?
Yes, while the supplier listing remains active and supplier stock is available. The part may be sourced from the supplier rather than existing local shelf stock.
