Brisbane Technical Hub

Local BQ7 Soft OLED stock at our Forest Lake counter. Walk-in pixel and touch test before fit. Full functionality test after install. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

Authenticity Guaranteed

Genuine BQ7 Diagnosable Soft OLED stock. Direct supply chain. Not relabelled hard OLED, IQ7 or no-name panel sold as BQ7. Every panel carries the BQ7 grade sticker.

Reliable Dispatch

Orders ship in 2-4 business days from Brisbane. Tracked dispatch on every order. Each panel is bench-tested for pixels, touch, brightness and 120Hz response. Foam-protected dispatch box.

No hot-air station, no microscope and no flux work needed for the screen swap. The display IC chip stays on this new assembly — nothing to lift from the original.

No JC, i2C or JCID programmer module required to enable True Tone. Configure True Tone through Apple's own diagnostic tools after install. Saves the tooling cost.

Proximity and ambient light sensor flex already mounted on the assembly. Transfer earpiece, dot projector and TrueDepth camera from the original chassis — Face ID returns to full function.

Both functions return after install once True Tone is enabled through Apple's diagnostic system. Auto-brightness behaves correctly straight away.

Each OLED pixel emits its own light. Black pixels switch off completely. True blacks, infinite contrast. Matches the original Apple Super Retina XDR depth.

Genuine 120Hz LTPO refresh, not a 60Hz fake. Adaptive 1-120Hz scrolling, smooth gaming and responsive touch. Always-On Display also works.

Full P3 wide colour gamut. 1000 nits typical, 1600 nits peak HDR, 2000 nits outdoor peak. HDR10 and Dolby Vision content renders with vivid highlights.

Capacitive multi-touch glass digitiser tuned for the 120Hz refresh. Smooth response across the panel. No dead zones, no ghost touch.

Dynamic Island cutout matches OEM exactly. Proximity sensor flex pre-installed. Transfer the original earpiece and TrueDepth array from the chassis — Face ID returns to full function.

Vendor-confirmed 12-month replacement warranty. Covers manufacturing defects on the panel and digitiser. Excludes physical damage.

Spider-web or shattered glass face. Touch may still work but glass shards risk fingers.

Touch ignores input or registers ghost taps with no finger present. Digitiser layer is damaged.

Display will not light up. Phone still rings and vibrates. Panel or driver IC has failed.

Black dots, vertical lines or coloured bars on the panel. Common after a hard drop on concrete.

Faint static UI elements (Dynamic Island, status bar, keyboard) ghosted on the original OLED after long use. Fresh OLED panel resets the burn clock.

Whole panel skewed green, pink or yellow after a drop or moisture intrusion. OLED driver IC or panel layer damaged. Swap restores accurate colour.

Sits at the top of the soft OLED aftermarket ladder. Tightest pixel tolerances, deepest blacks, full 120Hz LTPO ProMotion and the highest peak HDR brightness in this tier.

Flexible plastic OLED substrate. Each pixel lights itself. True blacks, infinite contrast, vivid HDR colour. Same panel technology Apple uses.

Adaptive 1-120Hz refresh rate. Smooth scrolling, responsive gaming and full Always-On Display support. Not a 60Hz fake dressed up as ProMotion.

Reads serial, configures True Tone and runs Apple diagnostics directly. No JC, i2C or JCID programmer module required.

Matches OEM iPhone 14 Pro Max resolution exactly. iOS renders at native pixel density. Razor-sharp text and icons. No scaling artefacts.

Pixel-perfect Dynamic Island cutout for the TrueDepth camera array. Notification animations, Live Activities and Face ID all work after sensor flex transfer.

Proximity and ambient light sensor flex already mounted. Saves time during install. Transfer the earpiece and TrueDepth modules from the original chassis only.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Every panel is tested before dispatch. Pixels checked, touch swept, 120Hz response verified. No dead-on-arrival units.

Bends slightly under install pressure without cracking. Far less likely to fail during the screen swap. Hard OLED uses rigid glass and is brittle in the technician's hands.

Slimmer panel stack. Sits flush against the iPhone 14 Pro Max chassis. Hard OLED is usually thicker and can press against internal flexes.

Same flexible substrate technology Apple uses on the factory iPhone 14 Pro Max. Identical look-and-feel after install. Customer cannot tell the difference.

Rigid glass substrate. Snaps if bent during install or sealed without perfect alignment. Higher install scrap rate, especially on first-time fitters.

Many hard OLED replacements ship a 60Hz panel and label it ProMotion. This BQ7 carries genuine 120Hz LTPO refresh and full Always-On Display support — verifiable in iOS settings.

All OLED panels (factory and aftermarket) use low-frequency PWM dimming below 50 percent brightness. This is inherent to OLED — not a fault of this panel. Honest disclosure.

High-volume iPhone 14 Pro Max screen replacements. Reliable batch consistency, predictable margins, no programmer-tooling cost and no microsoldering bench fee on every job.

On-site iPhone fitters who need premium quality without lugging external programmers or hot-air rigs. Diagnosable saves around 20 minutes per job.

Bulk refurb operations needing repeatable quality with full Face ID, True Tone and 120Hz ProMotion working. Claim resolution and resale grading depend on it.

Owners doing their own iPhone 14 Pro Max repair to skip the Apple Genius bill. Soft OLED is the more forgiving choice and Diagnosable removes the microsoldering barrier.

Soft OLED's flex tolerance and the no-microsolder install path make this the right teaching screen. Students survive their early install attempts and learn proper technique.

Restoring a cracked iPhone 14 Pro Max for sale or trade-in. Working True Tone, full 120Hz ProMotion and Face ID protect the resale grade.

FITS — iPhone 14 Pro Max (6.7″)

A2894 — Australia, UK, EU, India, Singapore, NZ, Rest of World

A2651 — USA (eSIM-only)

A2893 — Canada, Mexico, Japan, Saudi Arabia

A2895 — Russia, Kazakhstan, CIS

A2896 — China Mainland, Hong Kong, Macao

DOES NOT FIT

iPhone 14 Plus (6.7″) — same screen size BUT notch cutout (NOT Dynamic Island) and 60Hz panel. Will not fit.

iPhone 14 Pro — 6.1″ smaller chassis, also Dynamic Island and ProMotion but different dimensions.

iPhone 14 / 14e / 13 / 13 mini / 12 / 11 — 6.1″ or smaller, notch cutout, 60Hz only.

iPhone 13 Pro Max / 12 Pro Max / 11 Pro Max — 6.7″ or 6.5″ older chassis with notch (NOT Dynamic Island). Different connectors and dimensions.

iPhone 15 Pro Max — 6.7″ with Dynamic Island BUT redesigned bezel, titanium frame and revised connector layout.

iPhone 16 Pro Max — 6.9″, larger chassis entirely.

iPhone 15 Plus / 16 Plus — 6.7″ but different frame and connector layout.

iPhone SE (any generation) — entirely different LCD chassis, Touch ID home button.

Complete 6.7″ soft OLED with bonded touch digitiser. Dynamic Island cutout. 120Hz LTPO ProMotion. Display IC pre-flashed with valid panel calibration data.

Proximity and ambient light sensor flex already mounted. Face ID compatible after the TrueDepth array is transferred from the original chassis.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Sealed in a foam-lined rigid box. Pre-dispatch bench test card included for traceability.

Earpiece speaker and TrueDepth camera array (dot projector, infrared camera, flood illuminator). Adhesive strips not included.

Power off the iPhone 14 Pro Max. Remove the two P2 pentalobe screws beside the Lightning port.

Soften the adhesive with a heat pad. Use a suction cup and opening pick from the right side. Open the screen like a book.

Remove the metal cover plates. Disconnect the battery first. Then disconnect the three display flex connectors.

Carefully transfer the earpiece speaker and the TrueDepth camera array (dot projector, infrared camera, flood illuminator) onto the new BQ7 assembly. The proximity sensor flex is already pre-installed.

Reconnect the three display flex connectors and battery. Power on. Verify display, touch, 120Hz scrolling, Always-On Display, Face ID and earpiece.

Run Apple's diagnostic tools to enable True Tone on the new screen. No JC, i2C or JCID programmer required for this Diagnosable variant.

Apply fresh waterproof adhesive strips. Press the screen home. Refit the pentalobe screws. Done.

1 to 2 business days. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

2 to 3 business days after dispatch. Tracked the whole way.

3 to 5 business days after dispatch. Foam-protected packaging on every panel.

Covers manufacturing defects. Excludes physical damage and install errors. Always test before sealing.