• Send Us a Message
    • Skip to content
    iPhone 14 Loud Speaker Replacement PULL-A Ringer Buzzer Bottom Speaker A2882 A2649 Speakers JPC MOBILE ACCESSORIES

    iPhone 14 Loud Speaker Replacement PULL-A Ringer Buzzer Bottom Speaker A2882 A2649

    $0.00 - $0.00
    $0.00
    $9.40
    $9.40 - $9.40
    $9.40
    SKU Pull-Ringloud-14
    ๐Ÿ”ฉ PULL-A OEM ยท ORIGINAL APPLE ยท 12-MONTH WARRANTY

    iPhone 14 Loud Speaker / Ringer / Buzzer Module โ€“ PULL-A OEM โ€“ A2882 A2649 A2881 A2884 โ€“ 6.1-inch Bottom-Firing Speaker

    Original Apple bottom loudspeaker / ringer / buzzer module, pulled from a working iPhone 14 (6.1-inch standard model โ€” NOT Pro / Plus / Max) and pre-tested before despatch. Fits all iPhone 14 regional variants โ€” A2882 (Australia / global), A2649 (United States), A2881 (China / HK / Macao) and A2884 (Japan). Fixes no sound on speakerphone, no ringtone for incoming calls, quiet or muffled audio, distorted music, alarms not waking you, dead notification sounds, and water-damaged or blown bottom speakers. Sealed module with integrated water-resistant gasket and dust mesh โ€” restores the original IP68 audio path. Backed by a 12-month JPC Mobile warranty against component failure.

    ๐Ÿ”ฉ PULL-A OEM
    ๐Ÿ”Š Ringer + Buzzer + Speakerphone
    โœ… Pre-Tested
    ๐Ÿ›ก๏ธ 12-Month Warranty
    ๐Ÿ‡ฆ๐Ÿ‡บ Brisbane Stock

    โš ๏ธ READ FIRST โ€” Try The Free Fixes Before Buying A New Speaker

    A surprising number of "dead speaker" iPhone 14 calls are software, settings or a clogged speaker grille โ€” not a blown speaker. Work through these checks before opening the phone.

    โœ… Step 1 โ€” Check The Silent Switch & Volume

    The mute switch above the volume buttons is the #1 cause of "no ringtone" calls. Flip it down (orange showing = silent). Then Settings โ†’ Sounds & Haptics โ†’ drag Ringer And Alerts slider up.

    โœ… Step 2 โ€” Clean The Bottom Speaker Grille

    Pocket lint, dust and case debris pack into the speaker mesh. Use a soft brush, a dry toothbrush or a wooden toothpick (never metal) to clear the grille. Many "muffled" speakers come back to full volume instantly.

    โœ… Step 3 โ€” Force Restart & Disable Bluetooth

    Audio is being routed to forgotten AirPods or a car stereo more often than people realise. Swipe down โ†’ tap Bluetooth off. Then force-restart: press Volume Up, Volume Down, then hold Side until the Apple logo appears.

    If the speaker is still dead, distorted or only working at quarter volume after all three steps โ€” the speaker module has failed. JPC Mobile installs at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 โ€” call 0480 039 913.

    ๐Ÿ“ฑ Compatibility โ€” iPhone 14 (6.1-inch) Only

    โœ… A2882 โ€” AU / Global

    The Australian-market iPhone 14. Same as most international markets including UK, EU, India and Singapore.

    โœ… A2649 โ€” United States

    US iPhone 14 โ€” eSIM-only variant from launch. Same loudspeaker module as the global model.

    โœ… A2881 โ€” China / HK / Macao

    Mainland China, Hong Kong and Macao iPhone 14. Dual physical SIM. Same loudspeaker module.

    โœ… A2884 โ€” Japan

    Japanese iPhone 14. Same loudspeaker module โ€” output level not affected by the mandatory shutter-sound rule.

    Verify your model: Settings โ†’ General โ†’ About โ†’ Model Number. Australian iPhone 14 almost always shows A2882.

    โŒ DOES NOT FIT โ€” Read Before Ordering

    This loudspeaker module is engineered for the standard iPhone 14 (6.1-inch) only. Apple changed the speaker mounting, ribbon connector and chamber shape between generations and across the 14 lineup. Confirm your model before ordering.

    โŒ Other iPhone 14 Series Models

    iPhone 14 Plus โ€” 6.7-inch, A2886 / A2632, larger chamber, different mount

    iPhone 14 Pro โ€” 6.1-inch BUT different speaker module, A2890 / A2650

    iPhone 14 Pro Max โ€” 6.7-inch Pro chassis, A2894 / A2651

    โŒ Earlier Standard iPhones

    iPhone 13 / 13 mini โ€” different speaker connector position

    iPhone 12 / 12 mini โ€” different speaker assembly

    iPhone 11 ยท 11 Pro ยท 11 Pro Max โ€” older chassis design

    iPhone XR ยท XS ยท X โ€” entirely different module

    โŒ Newer iPhones & Other Apple Devices

    iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max โ€” different chassis revision

    iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max / 16e โ€” different speaker module

    iPhone SE (any generation) โ€” different chassis

    iPad ยท Apple Watch ยท iPod touch โ€” incompatible

    The iPhone 14 Pro and 14 Pro Max use a different speaker module even though the Pro is also 6.1-inch โ€” Apple redesigned the chamber for the Pro chassis. Confirm your model number before ordering โ€” call 0480 039 913 with your A-number for confirmation.

    ๐Ÿ”Š What This Speaker Module Drives

    The bottom speaker on the iPhone 14 is a single sealed module that produces every sound you hear from the phone except earpiece audio. Replace it and these all come back at the same time.

    ๐Ÿ“ž

    Speakerphone & FaceTime

    Hands-free voice calls, FaceTime audio and FaceTime video โ€” all of the outgoing audio for the person on the other end is driven through this module.

    ๐Ÿ””

    Ringtone & Notifications

    Incoming call ringtones, text alert tones, email notifications, app push notifications, calendar reminders and Find My alerts all play through this module.

    โฐ

    Alarms & Timers

    A failed bottom speaker means alarms don't wake you. Bedside alarm clock failure is the most common reason iPhone 14 owners notice the loudspeaker has died.

    ๐ŸŽต

    Music ยท Video ยท Game Audio

    Spotify, Apple Music, YouTube, TikTok, podcasts, game audio and Siri voice responses all play through the bottom speaker (paired with the earpiece for stereo).

    ๐Ÿ’ก Earpiece NOT included. The earpiece speaker (used during normal phone calls held to the ear) is a separate part. If only earpiece audio is broken, you need the proximity / earpiece flex โ€” not this module.

    ๐Ÿ”ฉ What PULL-A Grade Means For This Part

    Speaker quality is one of the most obvious differences between PULL-A OEM and aftermarket. Here's exactly what you're getting.

    ๐Ÿ† PULL-A โ€” What You're Getting

    Original Apple speaker module pulled from a working iPhone 14. Tested for full output level, clarity at high volume and no distortion before removal. Same factory speaker that left Apple โ€” full bass response, no rattle, no boomy mids.

    ๐Ÿ“ฆ Aftermarket / "OEM Copy"

    Made to Apple's dimensions but by third parties. Common issues: tinny mid-range, weak bass, distortion at full volume, lower maximum loudness, and the water-resistant gasket frequently fails. Not what this listing sells.

    โš ๏ธ PULL-B / Refurbished

    Pulled from damaged devices โ€” often water-affected. Cone may have already softened. Higher chance of distortion at higher volumes returning weeks after install. Not worth the labour to fit.

    This listing: PULL-A OEM โ€” original Apple bottom loudspeaker module โ€” pulled from a working iPhone 14, output-tested, and backed by a 12-month warranty.

    ๐Ÿ› ๏ธ Faults This Part Fixes โ€” Match Your Symptom

    After ruling out silent switch, volume, software and Bluetooth, these are the hardware symptoms this PULL-A module fixes.

    ๐Ÿ”‡ No Sound At All โ€” Speakerphone Or Music Is Silent

    Total speaker failure. Calls on speakerphone are silent, music plays but no sound emerges, alarms produce vibration only. Voice coil or amplifier path has failed.

    โšก Check first: confirm Bluetooth is off and audio is not routed elsewhere.

    ๐ŸŽถ Distorted, Crackling Or Rattling Audio

    Music sounds blown, ringtones crack, FaceTime audio buzzes. Speaker cone has been damaged โ€” usually from being driven at maximum volume for extended periods or from water exposure.

    ๐Ÿ”‰ Quiet / Muffled โ€” Sounds Underwater

    Speaker still works but at a fraction of normal volume. Often water residue inside the chamber or a damaged cone. Sounds dull and muddy. Maximum volume is well below normal.

    โšก Check first: clean the bottom speaker grille thoroughly with a soft brush.

    ๐Ÿ’ง Water Damage โ€” Recently Got Wet

    iPhone 14 fell in water, got rained on, or went through a wash cycle. Speaker is now weak, distorted or dead. The water-resistant gasket can degrade after a soak โ€” replacement restores the IP68 audio path.

    โฐ Alarms Don't Wake You

    The most common way iPhone 14 owners discover the speaker has died โ€” the alarm has stopped waking them. The phone vibrates but produces no audible alarm tone. Bedside use case fails.

    ๐ŸŽฎ Stereo Audio Sounds Wrong (Earpiece Only)

    Music and video play with audio coming only from the earpiece (top of phone) and nothing from the bottom. Stereo imaging is broken โ€” only one channel is reaching your ear. Confirms bottom speaker has failed.

    ๐Ÿ† Why Buy From JPC Mobile

    ๐Ÿ”ง

    Brisbane Technical Hub

    Operated by working iPhone repair technicians out of Forest Lake, QLD. Every speaker is volume- and clarity-tested before listing. Walk-in welcome at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

    โœ…

    Authenticity Guaranteed

    Genuine PULL-A โ€” original Apple speaker module pulled from a working iPhone 14 and pre-tested for output and clarity. Not a third-party replica or aftermarket clone with thin tinny audio.

    ๐Ÿšš

    Reliable Dispatch

    Ships within 2โ€“4 business days from Brisbane via tracked courier to every state and territory. Held in real Brisbane stock โ€” no offshore drop-ship lottery.

    ๐Ÿ‘ฅ Who Orders This Part

    Loudspeaker replacement is one of the most common iPhone 14 repairs โ€” water damage and alarm failures drive constant demand.

    ๐Ÿ”ง Independent Repair Shops

    The core buyer. Shops handling daily walk-ins for "no sound on speakerphone", dead alarms, water-damaged speakers and quiet ringtones. PULL-A OEM gives the audio quality customers expect after a paid repair.

    โ™ป๏ธ Phone Resellers & Refurbishers

    Buy iPhone 14 units discounted because of speaker faults, repair them, resell at market rate. Speaker faults are one of the most common reasons used iPhone 14s sell well below market value.

    ๐Ÿข Insurance Repair Technicians

    Processing insured iPhone 14 devices with water-damage or impact-related speaker failures. PULL-A OEM grade satisfies quality requirements and supports repair documentation for insurers.

    ๐Ÿ› ๏ธ Intermediate DIY Technicians

    Self-repairers who have done basic iPhone disassembly before. Loudspeaker replacement is rated intermediate โ€” no Face ID concerns, no display removal required if going through the back, but still requires pentalobe tools and adhesive.

    ๐Ÿ“‹ Full Technical Specifications

    Part GradePULL-A OEM โ€” pulled from a working iPhone 14, original Apple
    Compatible DeviceApple iPhone 14 (6.1-inch standard model) โ€” only
    Model NumbersA2882 (AU / global), A2649 (US), A2881 (CN / HK / Macao), A2884 (Japan)
    Component TypeBottom-firing loudspeaker / ringer / buzzer module โ€” sealed assembly
    Position In PhoneBottom-right of chassis, behind the speaker grille beside the Lightning connector
    DrivesSpeakerphone, ringtone, alarms, notifications, music, video, game audio, Siri voice โ€” paired with earpiece for stereo output
    Water ResistanceIntegrated water-resistant gasket and dust mesh โ€” restores the original IP68 audio path
    Connector TypeSpring contact โ€” connects to logic board contact pads (no flex cable to solder)
    Repair DifficultyIntermediate โ€” requires pentalobe screwdrivers, display or back-glass removal route, no Face ID transfer concerns
    Quality ControlPre-tested for output level, clarity at maximum volume and no rattle / no distortion before despatch from Brisbane
    In The Box1 ร— PULL-A OEM bottom loudspeaker module with integrated gasket and mesh
    Warranty12-month JPC Mobile warranty โ€” covers component failure under normal use

    ๐Ÿšš Australia-Wide Shipping from Brisbane

    ๐Ÿ“

    Brisbane Metro

    1โ€“3 business days

    ๐Ÿ™๏ธ

    Sydney ยท Melbourne ยท Gold Coast

    3โ€“5 business days

    ๐ŸŒ

    Adelaide ยท Perth ยท Hobart ยท Darwin

    5โ€“8 business days

    In-store pickup available at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Pay your way โ€” Afterpay and Klarna available at checkout.

    โ“ Frequently Asked Questions

    My iPhone 14 is silent on speakerphone but works in calls โ€” is this the part? +

    Yes โ€” this is the classic symptom of a failed bottom loudspeaker. The earpiece (top of phone, used during normal calls held to the ear) is a separate part โ€” that's why normal calls still work.

    Confirm by playing music or a YouTube video without headphones. If you hear sound only from the top earpiece (or nothing at all from the bottom), the loudspeaker has failed and this is the correct part.

    Always rule out Bluetooth routing first โ€” swipe down and tap the Bluetooth icon off, then test again.

    My ringer is quiet โ€” try the free fixes first? +

    Yes โ€” definitely. The most common causes of quiet ringtone are: pocket lint clogging the speaker grille, the side switch set to silent (orange showing), Ringer And Alerts volume slider turned down in Settings โ†’ Sounds & Haptics, or "Change With Buttons" turned off.

    Use a soft brush or wooden toothpick to clean the bottom speaker grille. Many "quiet speakers" return to full volume immediately.

    If the speaker is still quiet after cleaning and a software check, the cone has degraded and replacement is needed.

    My iPhone 14 went in water โ€” will this fix it? +

    If the only fault after the water exposure is a weak, dead or distorted bottom speaker โ€” yes, replacing the loudspeaker module restores audio. The new module also includes a fresh water-resistant gasket and dust mesh.

    If the phone has other water-related faults (battery draining fast, screen glitching, no charging, intermittent shutdowns), it needs a full water-damage diagnostic โ€” not just a speaker swap. Bring it in to JPC Mobile for assessment.

    Note that the iPhone 14 is rated IP68 but water resistance degrades over time and after every drop or repair. Apple does not warranty liquid damage.

    Does this come with the earpiece speaker too? +

    No. This is the bottom loudspeaker only. The earpiece speaker (top of phone, used when the phone is held against the ear during a call) sits inside the notch and is mounted on the proximity / Face ID flex assembly.

    If your earpiece is the only thing not working โ€” quiet calls, dead earpiece during normal calls, scratchy voice โ€” you need the proximity / earpiece flex cable instead, not this part.

    What is PULL-A grade and how is it different to aftermarket? +

    PULL-A means the speaker was removed from a working iPhone 14 and tested for full output level and clarity before removal. It is an original Apple part โ€” not a third-party replica.

    Aftermarket speakers are made by third-party manufacturers. The audio difference is immediately obvious โ€” thinner mid-range, weaker bass, distortion at maximum volume and lower peak loudness. The water-resistant gasket on aftermarket modules also fails sooner.

    For a paid repair where the customer expects the same sound as their iPhone 14 had on day one, PULL-A OEM is the only grade that delivers.

    Will this fit the iPhone 14 Pro, 14 Plus or iPhone 13? +

    No. This loudspeaker module is specific to the standard iPhone 14 (6.1-inch). Even the iPhone 14 Pro โ€” also 6.1-inch โ€” uses a different speaker module because Apple redesigned the speaker chamber for the Pro chassis.

    The iPhone 14 Plus is 6.7-inch with a larger chamber. iPhone 13 uses a different speaker connector position. None of these are interchangeable.

    Check your model: Settings โ†’ General โ†’ About โ†’ Model Number. iPhone 14 shows A2882, A2649, A2881 or A2884.

    Does this fit US-market (eSIM-only) and Chinese (dual-SIM) iPhone 14? +

    Yes. The bottom loudspeaker module is identical across all four iPhone 14 regional variants โ€” A2882 (AU / global), A2649 (US eSIM-only), A2881 (mainland China / HK / Macao dual-SIM) and A2884 (Japan).

    Apple varies the SIM card hardware, modem certification and band support between regions, but the speaker module is shared. This single PULL-A part covers all four regional models.

    What tools are needed for this repair? +

    Pentalobe screwdrivers (bottom edge screws), Phillips precision screwdrivers, plastic spudgers, fine-point tweezers, suction cup or opening picks and a heat gun or hair dryer to soften the screen or back-glass adhesive.

    A magnetic screw mat is essential โ€” the iPhone 14 uses very small differently-sized screws and putting the wrong one back can damage the logic board.

    JPC Mobile stocks professional iPhone repair tool kits โ€” visit the repair tools collection or ask in store at Shop 3A, Forest Lake QLD.

    Does this part come with a warranty? +

    Yes โ€” this PULL-A OEM bottom loudspeaker module comes with a 12-month warranty covering the part itself.

    The warranty applies to the component as supplied. It does not cover damage caused during installation or subsequent water exposure. Australian Consumer Law protections also apply to all purchases from JPC Mobile.

    If the part arrives damaged or not as described, contact us at 0480 039 913 or visit Shop 3A, Forest Lake QLD.

    How long does this repair take? +

    For an experienced technician: 30โ€“60 minutes. The repair is much simpler than a sensor flex repair โ€” no Face ID concerns, no display calibration. Time is split between opening the phone, removing shields and the Taptic Engine area, and reseating the new speaker module.

    Adhesive softening with heat takes 5โ€“10 minutes. The actual speaker swap is quick โ€” it sits behind the bottom edge and is held in by a few screws plus its own gasket pressure.

    Post-repair verification โ€” testing speakerphone, ringtone, alarms, music output, and absence of distortion at maximum volume โ€” adds another 5 minutes.

    Browse Related Categories
    Repair Tools & Kits
    ๐Ÿ›ก๏ธ

    The JPC Mobile Quality Seal

    Held in stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Output- and clarity-tested by working iPhone repair technicians before listing. 12-month warranty on every PULL-A speaker module. Australia-wide shipping with tracking via reliable courier.

    ๐Ÿ‡ฆ๐Ÿ‡บ
    Brisbane Stock
    โšก
    2โ€“4 Day Dispatch
    ๐Ÿ›ก๏ธ
    12-Month Warranty
    ๐Ÿ“ž
    0480 039 913

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options โ†’

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    iPhone 14 Loud Speaker Replacement PULL-A Ringer Buzzer Bottom Speaker A2882 A2649 Speakers JPC MOBILE ACCESSORIES

    iPhone 14 Loud Speaker Replacement PULL-A Ringer Buzzer Bottom Speaker A2882 A2649

    $9.40