iPhone 13 Pro Max Rear Housing Full Set - Graphite (Pull-A)
Restore a heavily damaged iPhone 13 Pro Max chassis with this genuine Apple Pull-A rear housing assembly in Graphite. Pull-A means the housing and attached components were removed from an original donor iPhone and graded for reuse. It is not a factory-new Apple Service Part or an aftermarket housing described as original.
This is a part-only listing for experienced repair work. The display, battery, logic board, cameras and other paired or device-specific components are not included and must be transferred from the original phone where required. Professional installation is strongly recommended because a full housing transfer is a major repair.
Compatibility
-
Device: Apple iPhone 13 Pro Max.
-
Colour: Graphite.
-
Compatible model numbers: A2643, A2484, A2641, A2644 and A2645.
-
Part type: rear housing assembly with a full set of supplier-listed small parts.
-
Condition grade: Pull-A genuine original donor-device component.
-
Current supplier SKU: Pull-FARearH-13PM-BLK.
This housing does not fit the iPhone 13, iPhone 13 mini or iPhone 13 Pro. Confirm the full model before purchase and compare the frame dimensions, camera opening, SIM configuration, connectors and included components with the original phone. Regional versions can differ, and previously repaired devices may contain mixed assemblies.
Supplier-listed assembly contents
Crazy Parts lists the current Pull-A assembly as including the rear housing, vibrator, radar component, Wi-Fi flex cable, loudspeaker, power and volume buttons, power and volume button flex cable, NFC and wireless charging coil, camera flash assembly, SIM card tray, tail flex and tail net, brackets and screws. The supplier also states that the Apple logo is present on the back.
Only components physically attached to the received housing are included. Small-part revisions, markings and cosmetic condition can vary between donor devices. Do not assume that every transferred or paired phone component is supplied. Inspect the product images and the received assembly before beginning the repair.
Pull-A condition
Pull-A is a reused genuine Apple donor part, not a new component. Light marks from prior use, removal, handling or storage may be present. Cosmetic variation is possible even within the Graphite finish. The part should be assessed for suitability before installation, especially around the frame rails, glass, camera openings, connector areas and screw mounts.
The former description used broad terms such as OEM grade, exact factory colour match and identical factory performance. Those claims are not used here. The accurate condition description is genuine Apple Pull-A, with the expected variation of a donor-device assembly.
What this housing may address
A rear housing assembly can be appropriate when the original back glass is extensively broken, the frame is bent or deeply damaged, camera openings are distorted, mounting points are compromised or a previous repair left the chassis unsuitable for safe reassembly.
A housing replacement does not automatically repair wireless charging, cellular, Wi-Fi, audio, button, camera, Face ID, battery or logic-board faults. Several of those functions depend on transferred parts, paired components, connectors and the quality of the installation. Diagnose the phone before ordering and test each function during repair.
Professional installation and safety
This repair requires disassembly of most of the phone and transfer of sensitive components. Back up important data, power the device off and follow an appropriate model-specific service procedure. Lithium-ion battery damage can cause fire, toxic fumes or thermal runaway, so the battery must be handled with suitable tools and training.
Disconnect power before disturbing connectors. Do not pry against the battery, puncture or bend it, force connectors, mix screw positions or apply uncontrolled heat. Protect the display, cameras, TrueDepth system and logic board from impact, static discharge and contamination. Stop work if the battery is swollen, damaged, overheating or producing an unusual smell.
General transfer outline
- Confirm the device is an iPhone 13 Pro Max and document its pre-repair condition.
- Compare the replacement housing and attached parts with the original assembly.
- Back up data, power off the phone and open it using a suitable service procedure.
- Disconnect the battery and remove the display without damaging flex cables.
- Transfer the logic board, cameras, battery and other required components carefully.
- Keep screws, brackets and shields organised by their original positions.
- Seat each connector squarely and route flex cables without trapping or creasing them.
- Perform staged functional testing before applying final adhesive or sealing the phone.
- Complete final checks after reassembly and before returning the device to normal use.
This outline is general information and does not replace technician training. JPC Mobile can assess installation separately; the listed price covers the part only.
Testing before final assembly
Before sealing the phone, test charging, wireless charging where applicable, Wi-Fi, Bluetooth, cellular service, microphones, speakers, vibration, cameras, flash, buttons, display, touch and Face ID. Also check that the frame sits flat, the display fits without pressure and the camera modules align correctly.
Any failure should be diagnosed before final adhesive is applied. Poor connector seating, transferred-part damage, missing brackets, incorrect screws, frame pressure or a fault that existed before the repair can produce symptoms unrelated to the supplied housing.
Availability and price
Shopify recorded zero local units during this review. Manual supplier browsing found the current Graphite Pull-A listing, but Crazy Parts showed it out of stock in both Sydney and Melbourne. The product remains active because the supplier listing is still current, but online overselling is disabled until stock becomes available again. Do not treat the temporary supplier shortage as a discontinued product.
The A$170.80 price includes GST. Shopify records A$58.70 unit cost excluding GST, giving an estimated 62.2% gross margin on GST-exclusive sales revenue before payment fees, freight, packaging, handling and returns. Crazy Parts publicly lists A$250.60 plus GST for the current Pull-A assembly, while Tecguru lists the exact current supplier SKU at A$305.80 including GST. Smart Station lists a different TQ1 full-set housing around A$133.65 including GST. The current JPC price therefore exceeds the 40% margin requirement while remaining below comparable genuine Pull-A retail.
Supplier warranty and Australian Consumer Law
Crazy Parts currently lists a 12-month supplier warranty for the exact Pull-A housing. Any voluntary supplier coverage is subject to the supplier's current terms, exclusions, assessment and availability; it is not represented as a separate JPC Mobile manufacturer warranty. Contact JPC Mobile before removing or returning an installed part if a possible defect is identified.
This supplier-warranty information does not exclude, restrict or modify any consumer guarantee, right or remedy that cannot lawfully be excluded under the Australian Consumer Law. Installation damage, cracked glass after fitting, bent frames, damaged flexes or connectors, punctured batteries, liquid exposure, excessive heat, misuse and faults in transferred components are not by themselves evidence that the supplied housing was defective.
Frequently asked questions
Is this a genuine Apple housing?
It is a genuine Apple Pull-A housing removed from an original donor iPhone. It is not a new Apple Service Part.
Is the colour Graphite?
Yes. Compare the product images and the received part because donor components can show normal cosmetic variation.
Why is the product currently unavailable?
Both local stock and the exact Crazy Parts supplier listing were out of stock at the time of review. The listing remains active for future replenishment.
Is installation included?
No. This is the rear housing assembly only; professional installation can be assessed separately.
