• Send Us a Message
    • Skip to content
    iPhone 13 Pro Max PULL-A Camera Flash Light Flex Cable Genuine Apple Pulled OEM A2484 A2644 Camera JPC MOBILE ACCESSORIES
    EMPTY DOM REMOVE PROTECTOR

    Camera Flash Light Flex Cable for iPhone 13 Pro Max (PULL-A)

    $0.00 - $0.00
    $0.00
    $23.80
    $23.80 - $23.80
    $23.80
    EMPTY DOM REMOVE PROTECTOR
    EMPTY DOM REMOVE PROTECTOR
    SKU Pull-FLFLEX-13PM
    EMPTY DOM REMOVE PROTECTOR
    EMPTY DOM REMOVE PROTECTOR
    EMPTY DOM REMOVE PROTECTOR
    ...
    ......
    ...
    Genuine Apple PULL-A · Donor Pulled · Bench Tested

    iPhone 13 Pro Max PULL-A Camera Flash Light Flex Cable — Genuine Apple Pulled OEM, A2484 / A2641 / A2643 / A2644 / A2645

    PULL-A grade genuine Apple flash light flex cable for iPhone 13 Pro Max. Pulled from working donor iPhone 13 Pro Max devices and bench tested. Restores rear camera True Tone flash and slow-sync flash output. Brings back the rear flashlight torch function for everyday use. Recovers the ambient light sensor for accurate auto-brightness control. Soft FPC ribbon flexes to factory routing inside the phone. Original Apple connectors snap into the logic board the first time. Suits A2484, A2641, A2643, A2644, and A2645 model numbers. Replaces a faulty flash module after drops, water, or repair damage. Bench inspected before dispatch from our Forest Lake repair workshop.

    PULL-A Apple OEM Donor Pulled Genuine True Tone Flash Ambient Light Sensor Bench Tested
    AU-Wide Tracked Bench Inspected Ships 2-4 Days

    Brisbane Technical Hub

    Local workshop at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Bench tested before dispatch by our techs.

    Authenticity Guaranteed

    Genuine Apple OEM flex cable pulled from working donor iPhones. No clones, no aftermarket.

    Reliable Dispatch

    Orders ship in 2-4 business days from Forest Lake. Australia Post tracking is included with every order.

    Symptoms Fixed What It Restores PULL-A Grade? Pre-Swap Triage Specifications Compatibility FAQs

    Common Flashlight And Flash Symptoms

    These signs all point to a faulty rear flash flex cable.

    Flashlight Will Not Turn On

    Torch icon stays grey or does nothing when tapped.

    "Flashlight Needs To Cool Down"

    Cooldown error appears even when the phone is cold.

    Camera Flash Will Not Fire

    Flash stays dark when taking flash-on photos or videos.

    Flash Flickers Or Stays On

    Flash blinks at random or stays lit until reboot.

    Auto-Brightness Broken

    Screen no longer dims in dark rooms or brightens outdoors.

    Damage After Drop Or Water

    Flash failed straight after a drop or water exposure.

    Damaged After Camera Repair

    Flex tore during a rear camera assembly replacement.

    Flash Very Dim

    Flash fires but is far weaker than it used to be.

    What This Cable Restores

    One flex carries every signal driving the rear flash module.

    True Tone Camera Flash

    Dual-LED slow-sync flash for natural-tone photo lighting.

    Rear Torch Flashlight

    Control Centre torch icon for everyday flashlight use.

    Ambient Light Sensor

    Auto-brightness response in dim and bright rooms.

    Video Flash Output

    Continuous flash light during 4K and slow-mo video.

    What Is PULL-A Grade?

    PULL-A is the top recovered-OEM grade. Each part is pulled from a working donor iPhone, then bench tested.

    Genuine Apple Hardware

    Real Apple flex cable, not aftermarket clone copy.

    Donor Pulled Working

    Recovered from devices that were tested before tear-down.

    Bench Tested

    Visual and continuity check before each cable is shipped.

    Original Apple Connectors

    FPC pins seat into the logic board on the first attempt.

    PULL-A is recovered original hardware, not a brand-new service-pack. Honest grade labelling.

    Confirm It Is The Flex First — Pre-Swap Triage

    Run these checks before opening the phone. They rule out software faults in minutes.

    • Force-quit the Camera app, then test the torch from Control Centre.
    • Restart the phone and test the flashlight one more time.
    • Update to the latest iOS version, then retest the flash.
    • Reset All Settings under Settings, General, Transfer or Reset.
    • Test the flash with a free third-party torch app from the App Store.
    • Run Apple Diagnostics through your Apple Account if available.
    • If symptoms remain after all of the above, the flex needs swapping.

    Professional Installation Recommended

    Removing the rear camera assembly to reach this flex requires care. Bring it to our Forest Lake workshop and we will fit it for you.

    Full Specifications

    Part
    Camera Flash Light Flex Cable
    Grade
    PULL-A (Pulled, Grade A)
    Origin
    Genuine Apple Donor Pulled
    Compatible Phone
    iPhone 13 Pro Max Only
    Apple Model Numbers
    A2484 / A2641 / A2643 / A2644 / A2645
    Phone Released
    September 2021
    Flash Module
    True Tone Dual-LED Slow Sync
    Sensor Carried
    Ambient Light Sensor
    Cable Type
    FPC Ribbon Flex
    Connector Style
    Original Apple FPC Pins
    Restores Function
    Flash + Torch + Auto-Brightness
    Mounting
    Internal Adhesive Routing
    Install Position
    Below Rear Camera Assembly
    Tools Needed
    Pentalobe + Tri-Point + Spudger
    Skill Level
    Intermediate Repair Tech
    Quantity
    1 Flex Cable Per Pack
    Quality Check
    Bench Inspected Pre-Dispatch
    Cover Window
    7-Day DOA Inspection
    Dispatch
    2-4 Business Days
    Shipping
    Australia Post Tracked
    Vendor Grade
    PULL-A Genuine Apple OEM

    Compatibility — iPhone 13 Pro Max Only

    Designed Solely For iPhone 13 Pro Max

    A2484 A2641 A2643 A2644 A2645

    All five global Apple model numbers share the same flash module layout.

    Does NOT Fit These Models

    • iPhone 13 Pro — different camera assembly, smaller phone.
    • iPhone 13 — dual camera setup with different flash module.
    • iPhone 13 mini — dual camera setup, smaller body size.
    • iPhone 12 Pro Max — different camera bump and flex routing.
    • iPhone 14 Pro Max — Dynamic Island redesign, new camera assembly.
    • iPhone 14 Pro — Dynamic Island redesign, smaller body.
    • iPhone 11 Pro Max and earlier — completely different camera layout.

    Open Settings, General, About, Model Number to check your model code.

    PULL-A Apple OEM vs Cheap Aftermarket Flex

    This PULL-A Apple Flex

    Genuine Apple OEM Hardware

    • Real Apple flex pulled from working donor iPhone.
    • Connectors seat into the logic board the first time.
    • Carries Apple sensor signals as the original cable did.
    • Bench tested for visual and continuity faults pre-ship.
    Cheap Aftermarket Flex

    Generic Clone Spec

    • Reverse-engineered clone copy of the Apple flex.
    • Connectors often seat poorly and lift back out.
    • Sensor signals can drop or read inaccurately.
    • Rarely bench tested before being shipped to buyers.

    Our 7-Day DOA Inspection Window

    Every PULL-A flex cable is bench tested before dispatch. Install and test it within 7 days of delivery.

    Bench Tested Pre-Ship

    Visual and continuity check before each cable is shipped.

    7-Day DOA Cover

    Contact us within 7 days if the flex arrives dead.

    No Long-Term Warranty

    PULL-A is recovered hardware sold without long-term cover.

    Install Damage Excluded

    Bent pins or torn cables from install are not covered.

    Honest grade labelling. PULL-A is not a brand-new service-pack part.

    Visit Us In Forest Lake, Brisbane

    Want help fitting the flash flex? Bring the phone to our workshop and we will install it for you.

    Brisbane Technical Hub
    Authenticity Guaranteed
    Reliable Dispatch

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Fast Australia-wide Shipping

    • Dispatch: Ships within 2-4 business days from Forest Lake.
    • Brisbane Metro: 1-3 business days after dispatch.
    • Sydney and Melbourne: 3-5 business days after dispatch.
    • Perth and Regional: 5-8 business days after dispatch.
    • Tracking: Australia Post tracking included on all orders.
    • Pickup: Local pickup available from our Forest Lake store.

    Pay your way — Afterpay and Klarna available at checkout.

    Frequently Asked Questions

    Will this flex fit my iPhone 13 Pro Max?+

    Yes. It is cut for the iPhone 13 Pro Max camera assembly only.

    All five Apple model numbers share the same flash module layout.

    Confirm your model in Settings, General, About, Model Number.

    What does PULL-A grade actually mean?+

    PULL-A is short for Pulled, Grade A.

    The flex is real Apple hardware pulled from a working donor iPhone.

    It is bench tested before dispatch from our Forest Lake workshop.

    My flashlight says it needs to cool down. Will this fix it?+

    Yes, that error often means the flash flex has failed.

    First update iOS and reset all settings to rule out software faults.

    If the message stays, swap this flex to clear the error for good.

    Does this also fix auto-brightness problems?+

    Yes, the same flex carries the rear ambient light sensor signal.

    A faulty flex can break auto-brightness in dim and bright rooms.

    Swapping the flex restores normal auto-brightness behaviour.

    Is this real Apple hardware?+

    Yes. PULL-A means real Apple parts pulled from working iPhones.

    It is not a clone, not aftermarket, and not a remanufactured unit.

    It is recovered original hardware, not a brand-new service pack.

    Can I install this flex myself at home?+

    It is an intermediate-level repair behind the rear camera.

    You need pentalobe, tri-point, and spudger tools to reach it.

    If you are not confident, bring the phone to our Forest Lake store.

    Why is there no long-term warranty?+

    PULL-A is recovered original hardware, not a new service-pack part.

    Each flex is bench tested before dispatch by our techs.

    A 7-day DOA inspection window covers any dead-on-arrival units.

    Will this work if my Camera app crashes too?+

    Camera app crashes usually point to a different rear camera fault.

    Check the rear camera assembly itself before swapping this flex.

    Bring the phone to our store and we will run a full diagnostic.

    My flash broke after a water spill. Will this fix it?+

    Often yes — water corrodes the flash flex pins first.

    Check for green corrosion at the flex connector before fitting.

    Clean any corrosion off the logic board pads, then fit the new flex.

    Will fitting this flex affect Face ID or other features?+

    No. The flash flex is separate from the front Face ID system.

    It only carries flash, torch, and ambient light sensor signals.

    Face ID, the rear camera, and the screen all work independently.

    Browse Related Categories
    Repair Tools Samsung Screen Protectors Samsung Phone Cases
    PULL-A Apple OEM · Bench Tested

    The JPC Mobile Quality Seal

    Every PULL-A flex cable is bench tested before dispatch. Address: Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Connector pins, ribbon integrity, and flash output are all checked.

    Brisbane Bench Inspection Australia Post Tracked 7-Day DOA Inspection

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    iPhone 13 Pro Max PULL-A Camera Flash Light Flex Cable Genuine Apple Pulled OEM A2484 A2644 Camera JPC MOBILE ACCESSORIES

    Camera Flash Light Flex Cable for iPhone 13 Pro Max (PULL-A)

    $23.80
    EMPTY DOM REMOVE PROTECTOR