Genuine Apple Pull-A Volume Button Flex Cable for iPhone 11
Replace a damaged or faulty volume-button flex cable in a compatible Apple iPhone 11 with this genuine Apple Pull-A component. Pull-A parts are original Apple components removed from original devices, then supplied for reuse after assessment and testing. This is a replacement part only and does not include installation labour, external buttons, a phone or a complete housing.
The exact Crazy Parts listing identifies this part as SKU Pull-VolumeFlex-11 and supplier item ID 51345. It is listed for iPhone 11 model numbers A2221, A2111 and A2223, with stock available from the supplier at the time of research. Crazy Parts states that the part is tested before shipping and recommends professional installation.
What Pull-A means
This Pull-A flex is a genuine Apple component recovered from an original Apple phone. It is not described as a newly manufactured aftermarket replacement. Because it has been removed from another device, minor signs of prior installation, adhesive residue or handling can be present without changing the part's intended function. The supplied item's condition should be inspected before installation.
Genuine pulled parts can be useful where a repairer prefers an original Apple component over an aftermarket copy. Pull-A does not mean that every fault in a phone will be resolved by installing the part, and it does not remove the need for proper diagnosis and pre-install testing.
Key features
-
Genuine Apple component: Removed from an original Apple device and supplied under Crazy Parts' Pull-A grade.
-
Volume-button flex cable: Intended to restore the internal connection associated with the iPhone 11 volume-button controls when this flex is the confirmed fault.
-
Exact model listing: Verified for iPhone 11 A2221, A2111 and A2223.
-
Supplier tested: Crazy Parts states that the part is tested before shipping.
-
Part-only supply: No repair service, housing, external volume keys, tools or phone is included.
-
Professional fitting advised: Installation requires controlled disassembly and safe handling of small internal components.
Verified compatibility
This volume-button flex cable is supplier-listed for Apple iPhone 11 model numbers A2221, A2111 and A2223.
Confirm the model before ordering. Depending on the installed software, the model number may be available in Settings under General and About. Original packaging or reliable device-identification records can also help. iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max use different internal components, so the phone name must be checked carefully.
The exact supplier listing does not name iPhone 11 Pro, iPhone 11 Pro Max or another model. Compatibility with those phones is not promised on this page.
Diagnose before replacing
A damaged volume-button flex can cause one or both volume buttons to stop responding, work intermittently or require unusual pressure. Similar symptoms can also result from damaged external buttons, a bent housing, contamination, corrosion, connector damage, board faults, software behaviour or another flex cable. Inspect and test the device before deciding that this component is the cause.
This listing is specifically for the volume-button flex cable identified by the supplier. It is not represented as including a power-button, flash, wireless-charging, NFC, camera or complete housing assembly. Compare the original cable and connector layout with the supplied part before installation.
Before installation
Back up important data, switch the device off and disconnect the battery before connecting or disconnecting internal flex cables. Work in an electrostatic-safe, clean and well-lit area. Use model-appropriate tools and keep screws organised because incorrect screw placement can damage internal layers or components.
Inspect the Pull-A part for transport damage, torn sections, damaged contacts or contamination. Connect and test it safely before final reassembly where the repair process allows. Confirm volume-up and volume-down operation throughout repeated presses. Do not remove protective material or apply permanent adhesive until basic function has been checked.
A flex cable can be damaged by sharp folds, stretching, excessive heat, trapped screws or pressure from the housing. Route it in the same position as the original and avoid forcing connectors. Stop if the cable does not align naturally. Professional installation is strongly recommended when the technician does not have the correct tools or experience.
After fitting
Test both volume buttons, audio-level changes during media playback, call-volume adjustment and any on-screen response before fully sealing the phone. Check that the external buttons move normally and are not held down by the housing. If a button remains unresponsive, repeat diagnosis rather than assuming the replacement flex is defective.
Opening an iPhone can affect seals and any remaining resistance to water or dust. This replacement does not guarantee restoration of the original factory water-resistance rating. New model-appropriate display adhesive and other service consumables may be required and are not included unless separately stated.
Repair outcomes depend on the condition of the device, correct diagnosis and installation quality. JPC does not guarantee that fitting this part will resolve every button-related symptom. Board damage, liquid exposure, damaged connectors or distorted mechanical components may require additional repair.
Product details
-
Brand: Apple
-
Supplier grade: Pull-A
-
Product: Volume button flex cable
-
Compatible device: Apple iPhone 11
-
Compatible model numbers: A2221, A2111 and A2223
-
Supplier SKU: Pull-VolumeFlex-11
-
Supplier item ID: 51345
-
Condition: Genuine original-device pull, not newly manufactured aftermarket stock
-
Supply format: Internal replacement part only
-
Installation: Professional installation recommended
The existing number 51345 is retained as the exact supplier item and RepairDesk lookup value. It is not presented as a verified UPC, EAN or GTIN because no valid global retail barcode was confirmed during this review.
Package contents
- 1 x genuine Apple Pull-A volume button flex cable for iPhone 11
An iPhone, external volume buttons, housing, battery, display adhesive, tools, installation labour and other internal parts are not included.
Availability
At the time of research, Crazy Parts showed the exact Pull-VolumeFlex-11 item in stock in Sydney and low stock in Melbourne. JPC currently records zero units in local Shopify inventory. Customers may still order the part while supplier fulfilment remains available, so the item continues selling after local stock reaches zero. Dispatch timing depends on supplier availability when the order is processed.
Warranty and Australian Consumer Law
Crazy Parts advertises a 12-month supplier warranty for this exact Pull-A part. Any supplier warranty is subject to the supplier's terms, exclusions, installation conditions and assessment process and is not presented as an additional or voluntary JPC Mobile warranty. Damage caused by installation, torn flex cables, impact, pressure, liquid, corrosion, contamination or use in an incompatible device may fall outside supplier coverage.
Nothing on this page excludes, restricts or modifies any consumer guarantee, right or remedy that cannot lawfully be excluded under the Australian Consumer Law. Consumer rights apply independently of supplier warranty wording.
Frequently asked questions
Is this a genuine Apple part?
Yes. Under the confirmed Pull-A definition, it is a genuine Apple component removed from an original Apple device.
Is the part brand new?
No. Pull-A identifies an original-device pull, not a newly manufactured aftermarket component.
Does it fit iPhone 11 Pro or Pro Max?
No such compatibility is promised. The exact listing is for iPhone 11 A2221, A2111 and A2223.
Are the external volume buttons included?
No. This listing is for the internal flex cable only.
Is installation included?
No. The price is for the part only and professional installation is recommended.
