Genuine Apple Pull-A iPhone 13 Pro Rear Housing - Sierra Blue
Restore a damaged iPhone 13 Pro frame and rear housing with this genuine Apple Pull-A assembly in Sierra Blue. Pull-A means the part was removed from an original Apple donor phone and graded for strong cosmetic condition rather than manufactured as a new aftermarket copy. This listing is for the replacement rear housing assembly and the supplier-listed fitted components only; it is not a complete phone and it does not include installation.
The exact Crazy Parts supplier record is Rear Housing with Full Set Parts for iPhone 13 Pro - Sierra Blue (PULL-A), product 38032, variant 51092. Check the iPhone model number and inspect every supplied component before installation. A housing replacement is an advanced repair that requires transferring the logic board, display, battery, cameras and other retained parts from the original device.
Key product details
-
Brand: Genuine Apple pulled component.
-
Grade: Pull-A donor-device part.
-
Device: Apple iPhone 13 Pro only.
-
Color: Sierra Blue.
-
Part type: Rear housing with supplier-listed full-set parts.
-
Condition: Used original component; minor handling or cosmetic marks may still be present.
-
Installation: Professional installation strongly recommended.
Compatible iPhone models
- iPhone 13 Pro A2483
- iPhone 13 Pro A2636
- iPhone 13 Pro A2638
- iPhone 13 Pro A2639
- iPhone 13 Pro A2640
Apple identifies those A-numbers as iPhone 13 Pro models. The iPhone 13 Pro has a 6.1-inch display and Sierra Blue was an official colour for this model. This housing does not fit iPhone 13, iPhone 13 mini, iPhone 13 Pro Max or another iPhone generation. To find the model number, open Settings, choose General and About, then tap the displayed part number to reveal the A-number. On models with a SIM tray, the model number may also be visible inside the SIM-tray slot.
Supplier-listed assembly contents
The exact Crazy Parts listing states that the assembly includes the following fitted parts:
- Rear housing in Sierra Blue
- Vibrator
- Radar component
- Wi-Fi flex cable
- Loudspeaker
- Power and volume buttons
- Power-button and volume-button flex cables
- NFC and wireless-charging coil
- Camera flash assembly
- SIM card tray
- Tail flex and tail net
- Associated brackets and screws
- Apple logo on the rear housing
The list above follows the exact supplier description. The phone's display, battery, logic board, rear camera modules, front camera and Face ID assembly are not listed as included and should be transferred or sourced separately as required. Adhesives, tools and installation labour are not included unless separately purchased or arranged.
What Pull-A means
This is a genuine Apple component removed from an original donor iPhone rather than a new Apple retail service pack. Pull-A describes the supplier's higher cosmetic grade for a pulled part. Because it has previously been fitted to a device, small cosmetic variations, traces of prior installation or minor marks can occur. The exact item received should be photographed and inspected before work starts.
A pulled housing can be a useful choice when an original-material frame, genuine finish and fitted Apple components are preferred over an aftermarket shell. Pull-A does not mean factory-new, sealed or guaranteed to be visually perfect under magnification. It also does not confirm the history of the donor phone beyond the supplier's grading and listing.
Repair uses
This assembly is intended for an iPhone 13 Pro with cracked rear glass, a bent or heavily marked frame, damaged button mounts, a worn housing finish or another housing-related fault. A rear-housing replacement can improve the structure and appearance of a repair, but it does not repair faults caused by the display, cameras, battery, logic board, charging port or software.
Diagnose the device before ordering. Frame damage may be accompanied by hidden damage to the battery, board, camera stabilisation, wireless charging system or connectors. Do not install a battery that is swollen, punctured or heat damaged. A housing swap should not be used to conceal unresolved liquid damage or structural damage.
Installation and testing
This is a technically demanding repair. The display must be opened safely and multiple delicate components must be disconnected and transferred. Incorrect handling can damage the display, battery, logic board, Face ID hardware, cameras, wireless-charging system, flex cables, seals and connectors. Professional repair tools, ESD precautions and device-specific experience are recommended.
Before permanent assembly, compare the old and replacement housings, connector layout, model number, SIM configuration and colour. Bench-test all transferred and fitted functions where practical, including buttons, vibration, loudspeaker, microphones, Wi-Fi, cellular reception, NFC, wireless charging, camera flash and charging. The supplier lists an NFC/wireless-charging coil, but this page does not guarantee MagSafe or Qi performance before the completed device is correctly assembled and tested.
Opening the phone compromises its original seals. A housing replacement does not automatically restore Apple's original water-resistance rating. Use suitable new adhesives where required, follow safe curing procedures and advise the device owner that water resistance cannot be guaranteed after repair.
Product identification
-
JPC / RepairDesk SKU: Pull-RearH-13P-BLU.
-
Crazy Parts supplier SKU: Pull-FARearH-13P-BLU.
-
Crazy Parts item ID: 68555_3.
-
Shopify recorded weight: 120 g.
-
Color option: Sierra Blue.
The Shopify SKU is preserved because RepairDesk is the source of truth and the exact RepairDesk record has not yet been reconciled in this session. The supplier SKU is documented as an alias because the two identifiers are not identical. The previous barcode value 64042_3 is not a valid retail GTIN, EAN or UPC and has been removed from the barcode field rather than sent to sales channels as a false identifier.
Availability
Shopify recorded zero local units during this review. The exact Crazy Parts listing showed low stock in Sydney and out of stock in Melbourne. The product remains active with supplier-order fulfilment enabled because the exact supplier item is still current and orderable. Supplier quantities can change before an order is placed or dispatched, so availability should be confirmed for time-sensitive repairs.
Part-only pricing
The A$199.99 price includes GST and is for the part only. It does not include diagnosis, installation, data transfer, repair labour or additional parts. On the recorded A$86.70 ex-GST unit cost, A$199.99 including GST provides approximately 52.3% gross margin on GST-exclusive revenue.
At the time of research, the exact Crazy Parts public retail price was A$245.30 plus GST, or A$269.83 including GST. Fixo Australia listed a used and tested iPhone 13 Pro rear housing at A$249.99 including tax, while Tecguru listed the same supplier SKU at A$294.70. JPC's part-only price remains below those Australian retail references while providing the requested margin for a higher-value repair part.
Supplier warranty and Australian Consumer Law
Crazy Parts displays a 12-month supplier warranty for the exact product. That is recorded here as a supplier-backed parts warranty and is subject to the supplier's assessment and terms. It is not a promise against cosmetic variation in a used pulled part, accidental damage, liquid damage, incorrect installation, torn flex cables, damaged connectors or faults caused by other device components.
This supplier-warranty information does not exclude, restrict or modify any consumer guarantee, right or remedy that cannot lawfully be excluded under the Australian Consumer Law. Keep proof of purchase and installation records and contact JPC Mobile - Tech Repair & Accessories if a fault needs assessment.
Frequently asked questions
Is this a genuine Apple housing?
Yes. Pull-A means the part was removed from an original Apple donor iPhone and graded by the supplier. It is not described as a new Apple service pack.
Does it fit iPhone 13 Pro Max?
No. It is for the iPhone 13 Pro model numbers listed above. The Pro Max housing is a different size.
Is the part factory-new?
No. This is a used original Pull-A component. Minor cosmetic or installation evidence can be present even at the supplier's higher pulled-part grade.
Are the cameras and battery included?
No. The supplier's inclusion list does not include the display, battery, logic board or camera modules. Those parts must be transferred or sourced separately.
Is installation included?
No. The advertised price is for the part only. Professional installation can be arranged separately where available.
Is MagSafe guaranteed?
The supplier lists the NFC/wireless-charging coil as included, but the completed phone must be correctly assembled and tested. This listing does not promise MagSafe performance before installation and verification.
Will the phone remain water resistant?
Water resistance cannot be guaranteed after opening and rebuilding the device. Correct replacement adhesives and installation procedures are essential.
