Clear Acrylic Foam Double-Sided Tape 3mm × 25m

Clear Acrylic Foam Double-Sided Tape - 3 mm × 25 m

A narrow roll of clear double-sided acrylic foam tape for careful repair, electronics, craft and light-duty mounting work. The 3 mm width helps with small channels and components where wider tape would create excess overhang.

Key details

• Clear double-sided acrylic foam tape
• 3 mm width
• 25 m roll length
• Red release liner
• One roll supplied

Suitable applications

• Phone and tablet repair where generic narrow foam tape is appropriate
• Small electronic components, cable guides and light trim
• LED channels, hobby projects and general craft work

This is a general-purpose unbranded tape. It is not represented as a 3M VHB product and no specific 3M product family, adhesive grade, thickness or temperature rating is claimed.

Application guidance

1. Remove old adhesive and clean both surfaces so they are dry and free from dust, oil and residue.
2. Test compatibility on the intended materials before final assembly.
3. Apply without stretching, align carefully and press firmly across the full bond area.
4. Allow the adhesive bond to develop before placing the joint under load.

Important

• Not a substitute for model-specific battery pull tabs, display adhesive gaskets or factory water-resistant seals.
• Do not use for structural, load-bearing or safety-critical mounting.
• Keep adhesive and tools away from exposed battery cells and delicate display or flex-cable surfaces.
• Removal may require controlled heat and can damage fragile parts if performed incorrectly.

Your rights under the Australian Consumer Law apply.