BQ7 Soft OLED Screen Assembly — iPhone 16 Plus — Display Replacement — Diagnosable, True Tone Ready
This screen fits the iPhone 16 Plus only. It is a premium BQ7 best-quality aftermarket part. BQ7 is aftermarket, not a genuine Apple screen. The panel is a flexible soft OLED display. It shows deep blacks and high brightness. The full digitizer gives smooth, accurate touch. It is diagnosable and configuration ready for shops. A programmer can restore True Tone after fitting. It fits the 6.7-inch Super Retina-class display. It fits models A3082, A3289, A3290 and A3291. The part carries a 12-month warranty. Bench inspected before dispatch from Forest Lake.
Signs You Need This Screen
Replace the screen when you see any of these faults.
12-Month Warranty Included
Every BQ7 screen is covered for 12 months against panel and touch defects.
Brisbane Technical Hub
Dispatched from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Real repair support after you buy.
Authenticity Guaranteed
Verified BQ7-grade parts from trusted suppliers. Premium aftermarket grade, never cheap clones.
Reliable Dispatch
Ships in 2-4 business days from Forest Lake via tracked post. Packed safe to avoid transit damage.
Why Choose BQ7 Best Quality Aftermarket
BQ7 means best quality aftermarket. It is premium aftermarket, not a genuine Apple part.
Premium Aftermarket Tier
BQ7 sits above generic clones. It is tuned for the Australian repair market.
Soft OLED Panel
A flexible soft OLED gives deep blacks and bright, accurate colour.
Diagnosable & Config Ready
It works with programming machines for True Tone and diagnostics.
Constantly Improved
The product team reviews faults and updates BQ7 for stable quality.
Confirm The Screen Is The Fault
Run these quick checks before you swap the screen.
- Back up your phone before any repair work.
- Call the phone and listen for ring or vibrate.
- Plug it into a computer to check it is detected.
- Look for cracks, black patches, lines or dead zones.
- Test touch across the whole display.
- Try a force restart before you swap parts.
- No image but phone works means a display fault.
- Good image but no touch means a digitizer fault.
- No power at all points to the logic board.
Install Notes
This repair is for experienced technicians.
- Power off and disconnect the battery first.
- Warm the edges to soften the screen adhesive.
- Remove the two bottom pentalobe screws.
- Lift the old screen gently from the bottom edge.
- Undo the metal shields over the flex connectors.
- Transfer brackets and the sensor flex if not pre-fitted.
- Handle the Face ID flex with great care.
- Use a programmer to restore True Tone if needed.
- Reseal the frame with fresh adhesive.
Difficulty: moderate. Best fitted by a skilled repairer.
Tools You Will Need
Pentalobe P2
For the two bottom screws.
Tri-Point Y000
For inner connector brackets.
Suction Cup & Picks
To lift and open the screen.
Spudger
To unclip flex connectors safely.
Heat Pad
To soften the old adhesive.
Programming Machine
To restore True Tone after fitting.
Full Specifications
Compatibility — iPhone 16 Plus
Fits This Model
This assembly matches the iPhone 16 Plus frame and connectors.
Does NOT Fit These Models
- iPhone 16 — smaller 6.1-inch display.
- iPhone 16 Pro — 6.3-inch ProMotion panel.
- iPhone 16 Pro Max — larger 6.9-inch panel.
- iPhone 16e — different display and frame.
- iPhone 15 Plus and 15 — different assembly and connectors.
- Any non-16-Plus iPhone model — wrong fit.
Check your model in Settings, General, then About before ordering.
BQ7 Soft OLED vs A Cheap Clone Screen
Premium Aftermarket Quality
- Flexible soft OLED with deep blacks.
- High brightness and accurate colour.
- Diagnosable and configuration ready.
- Backed by a 12-month warranty.
Low Grade, More Returns
- Dull colour and lower brightness.
- Touch lag and ghost-touch faults.
- Often not diagnosable or config ready.
- Little or no real warranty cover.
Visit Us In Forest Lake, Brisbane
Drop in for screen fitting or expert repair advice.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Shipping & Delivery
- Dispatch: 2-4 business days from Forest Lake QLD.
- Brisbane Metro: usually 1-3 business days after dispatch.
- Sydney and Melbourne: usually 2-4 business days after dispatch.
- Perth and regional areas: usually 4-7 business days after dispatch.
- Tracking: a tracked number is emailed on dispatch.
- Pickup: collect in store at Shop 3A, Forest Lake QLD.
Pay your way — Afterpay and Klarna available at checkout.
Frequently Asked Questions
Browse More Repair Parts
Pay your way — Afterpay and Klarna available at checkout.
The JPC Mobile Quality Seal
Your screen is tested and packed by our Brisbane team. Buy online or visit us in store.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Payment Options
We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.
Shipping & Processing Information
Processing Time
All orders require 2-4 business days for processing, regardless of shipping method.
This includes order verification, picking, packing and preparation for dispatch.
You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.
Shipping Methods
Standard: 3-7 business days in transit after processing
Express: 1-2 business days in transit after processing
Express shipping only affects delivery time once dispatched, not processing time.
Express shipping does not expedite the 2-4 business day processing time.