• Send Us a Message
    • Skip to content
    BQ7 OLED Assembly – Motorola Moto Razr 60 – Inner Foldable Display 6.9″ 120Hz LTPO Screen Replacement JPC MOBILE ACCESSORIES

    BQ7 OLED Assembly – Motorola Moto Razr 60 – Inner Foldable Display 6.9″ 120Hz LTPO

    $0.00 - $0.00
    $0.00
    $304.80
    $304.80 - $304.80
    $304.80
    SKU BQ7-MotoRazr60
    ⭐ BQ7 OLED · INNER FOLDABLE ASSEMBLY · TIER-1 AFTERMARKET

    BQ7 OLED Assembly – Motorola Moto Razr 60 – Inner Foldable Display

    Premium tier-1 BQ7 aftermarket OLED replacement for the Motorola Moto Razr 60 (2025) inner main foldable display. Genuine 6.9″ LTPO pOLED form factor with 120Hz refresh, HDR10+ support, capacitive multi-touch and pre-fitted ultra-thin protective layer. Each panel is electrically and visually tested before shipping. Includes the foldable hinge-side flex tail. Replaces the inner display only — the outer 3.6″ cover screen is a separate part. 12-month replacement warranty.

    📐 Inner 6.9″ Foldable
    ⚡ 120Hz LTPO
    🛡️ 12-Month Warranty
    🇦🇺 Brisbane Stock

    📱 Compatibility — Motorola Moto Razr 60 (2025) Inner Display

    ✅ FITS — Motorola Moto Razr 60 (2025)

    XT2551 series — global Razr 60 variants (released April 2025)

    Display targeted: Inner main foldable 6.9″ pOLED

    Refresh rate: 120Hz LTPO

    Includes: Foldable OLED panel, capacitive multi-touch digitiser, ultra-thin protective layer, hinge-side display flex tail

    ❌ DOES NOT FIT

    Razr 60 outer 3.6″ cover screen — separate part, ordered separately

    Razr 60 Ultra (2025) — different chassis, different inner panel size and flex pinout

    Razr 50 / Razr 50 Ultra (2024) — previous generation, different inner panel

    Razr 40 / Razr 40 Ultra (2023) — older generation, incompatible flex

    Original Razr (2019/2020) and Razr 5G (2020) — completely different design

    Any non-foldable Motorola model — Edge, G, Moto Pro, etc

    Verify your model number under Settings → About Phone → Model Number before ordering. The Razr 60 reads as XT2551-x (suffix varies by region).

    🎯 The BQ7 OLED Difference

    BQ7 is the top-tier aftermarket grade for foldable smartphone displays — a real LTPO pOLED panel with a real foldable substrate, not a flat OLED retrofitted into a flip chassis. Built specifically for the Razr 60 inner display assembly with the correct hinge-side flex.

    📐

    Genuine Foldable pOLED

    Real plastic OLED substrate engineered to bend at the Razr 60 hinge. Not a glass OLED forced into a flip — the panel actually folds.

    ⚡

    120Hz LTPO Refresh

    Smooth 120Hz scrolling and animation, with LTPO backplane for power-efficient frame-rate scaling on supported content.

    🌈

    HDR10+ Support

    Wide colour gamut and HDR10+ tone-mapping retained. Vivid contrast and deep true-black OLED behaviour.

    👆

    Capacitive Multi-Touch

    High-sensitivity multi-touch digitiser bonded into the display stack. Smooth gestures, accurate taps, fast scroll tracking.

    🛡️

    Pre-Fitted UTG Layer

    Ultra-thin protective layer arrives pre-fitted on the OLED — no separate film install required. Do not peel during installation.

    🧪

    Per-Panel QC

    Every BQ7 OLED is electrically + visually tested before shipping — pixel scan, touch grid sweep, brightness uniformity check, hinge flex continuity.

    💎 BQ7 Aftermarket vs OEM vs Generic — Honest Comparison

    Three buying options exist for a Razr 60 inner foldable replacement. Here's what each one really delivers.

    ✅ BQ7 Aftermarket (This Product)

    Panel: Foldable pOLED, real LTPO backplane

    Refresh: 120Hz

    HDR10+: Yes

    UTG layer: Pre-fitted

    QC: Per-panel test

    Warranty: 12 months

    📦 OEM Service Part (Reference)

    Panel: Original Motorola foldable pOLED

    Refresh: 120Hz

    HDR10+: Yes

    UTG layer: Pre-fitted

    QC: Factory grade

    Warranty: Per Motorola service terms

    ⚠️ Generic No-Name Aftermarket

    Panel: Often unbranded, variable substrate

    Refresh: May cap at 60Hz

    HDR10+: Often dropped

    UTG layer: Quality varies — may delaminate

    QC: Batch sample only

    Warranty: Often DOA only

    Bottom line: BQ7 sits between OEM service cost and generic risk — full 120Hz, HDR10+ retained, real foldable substrate, real warranty.

    ⚠️ Foldable Display Care — Read Before Install

    Foldable pOLED displays are far more delicate than rigid glass OLEDs. Follow these handling rules to avoid voiding the warranty.

    🚫 Never Press The Crease

    Do not push, prod or rest tools on the centre fold line. The hinge area uses a thinner substrate and is the most failure-prone region of any foldable display.

    🪶 Do Not Peel UTG Layer

    The ultra-thin protective layer is bonded as part of the panel — it is not a removable factory film. Peeling it will destroy the display surface and void the warranty.

    🔪 No Sharp Tools Near Hinge

    Use plastic spudgers and opening picks only when separating the inner display from the chassis. Metal blades near the hinge flex will sever the display tail.

    🌡️ Heat Gently & Evenly

    Use a low-temperature heat pad. Foldable adhesive softens at lower temperatures than rigid glass — too much heat warps the substrate permanently.

    If you have not opened a foldable phone before, professional install is strongly recommended. JPC Mobile Forest Lake — 0480 039 913.

    📋 Full Technical Specifications

    Compatible DeviceMotorola Moto Razr 60 (2025) — XT2551 series
    Display TargetedInner main foldable display (NOT outer 3.6″ cover screen)
    Panel TypeFoldable pOLED (plastic OLED) with LTPO backplane
    Screen Size6.9 inches (diagonal, unfolded)
    Resolution1080 × 2640 pixels
    Refresh Rate120Hz LTPO (vendor-confirmed)
    HDR SupportHDR10+ retained
    Touch TypeCapacitive multi-touch, in-cell digitiser
    Protective LayerUltra-thin protective layer pre-fitted (do not peel)
    Display FlexNative hinge-side flex tail with OEM-spec connector
    GradeBQ7 — top-tier aftermarket foldable OLED
    QC TestPer-panel pixel + touch + brightness + flex continuity test before despatch
    Outer Cover DisplayNOT included — outer 3.6″ pOLED is a separate part
    Hinge / Mid-FrameNOT included — transfer your original hinge assembly
    Adhesive StripsNOT included — order foldable display adhesive separately
    Recommended InstallProfessional repair technician with foldable phone experience
    Warranty12-month replacement warranty (vendor-confirmed)

    🏆 Why Buy From JPC Mobile

    🔧

    Brisbane Technical Hub

    Operated by repair technicians out of Forest Lake, QLD. Every BQ7 foldable OLED batch is bench-tested before listing — pixel scan, touch sweep, hinge flex continuity. Defective units never reach a customer.

    ✅

    Authenticity Guaranteed

    Genuine BQ7-grade foldable pOLED. Not a rigid OLED relabelled BQ7. Not a Razr 50 panel rebranded as Razr 60. Real Razr 60 form factor with the correct hinge-side flex tail.

    🚚

    Reliable Dispatch

    2–4 business days nationwide via tracked Australia Post & courier. Foldable OLEDs are packed in rigid foam protectors to prevent crease damage in transit. Held in Brisbane stock.

    👥 Who This Razr 60 OLED Is Built For

    🛠️ Foldable-Capable Repair Shops

    Stock the part Motorola customers actually drop in for — a real foldable pOLED with full 120Hz and HDR10+. Match OEM service quality at a competitive aftermarket price.

    📱 Cracked-Crease Owners

    Inner display crack along the fold, dead vertical line down the centre, touch failure across the hinge — classic foldable failures a fresh BQ7 OLED restores.

    💼 Resellers / Refurbishers

    Refurbish trade-in Razr 60 stock — a clean inner display dramatically lifts resale value vs disclosing a damaged or screen-marked main panel.

    🏥 Insurance Replacements

    Insurance and warranty workshops needing a tier-1 aftermarket panel that meets the original spec sheet — 120Hz, HDR10+, foldable substrate, 12-month cover.

    🔍 Replace The Inner Display When You See

    📏 Vertical Line Down Centre

    A coloured stripe running down the fold line — the most common foldable failure, caused by hinge-area substrate fatigue.

    💥 Cracked UTG Surface

    Spider-web crack on the inner protective layer, often from pressure point damage or sitting on the open phone.

    ⬛ Dead / Black Half

    Top or bottom half of the inner display has gone dark — display driver flex damaged or panel failure.

    👆 Touch Dead Across Crease

    Touch works on one side of the fold but ignores swipes that cross the centre — digitiser layer split.

    🌈 Pink / Green Patches

    Discoloured blooms across the inner panel — internal OLED layers damaged from pressure or moisture.

    🔥 OLED Burn-In

    Faint ghosted images of static UI elements — keyboard, status bar or app icons left on too long.

    🛠️ Install — High-Level Overview (Pro Workshop)

    STEP 1

    Power Off & Remove SIM Tray

    Power off the phone fully. Eject the SIM tray. Place the closed phone on a soft work surface with the inner display facing down.

    STEP 2

    Heat Gently & Open Rear

    Apply low-temperature heat to soften the rear cover adhesive. Use a suction cup + thin plastic pick to lift the rear cover. Mind the wireless charging coil flex.

    STEP 3

    Disconnect Battery First

    Always disconnect the battery flex before any other connectors. Then disconnect the inner display flex from the motherboard side.

    STEP 4

    Release Inner OLED

    Carefully release the inner OLED from the foldable mid-frame using plastic spudgers and isopropyl. Avoid the crease region. Never twist or flex the panel beyond its natural fold.

    STEP 5

    Seat New BQ7 OLED

    Apply fresh foldable display adhesive. Seat the new BQ7 panel into the mid-frame, aligning the hinge-side flex with the existing routing channel. Do not peel the UTG protective layer.

    STEP 6

    Reconnect & Test Before Sealing

    Reconnect display flex, then battery flex. Power on. Verify full panel illumination, 120Hz scroll, multi-touch sweep across the fold, and HDR10+ playback. Only then reseal the rear.

    ⚠️ TEST BEFORE SEALING. Foldable rear adhesive is single-use and unforgiving. Verify the new OLED works completely before reapplying adhesive and pressing the rear back into place.

    🚚 Australia-Wide Shipping from Brisbane

    📍

    Brisbane Metro

    1–2 business days

    🏙️

    Sydney · Melbourne · Gold Coast

    2–3 business days

    🌏

    Adelaide · Perth · Hobart · Darwin

    3–5 business days

    Foldable OLEDs ship in rigid foam-lined boxes to protect the panel from crease damage. Pay your way — Afterpay and Klarna available at checkout.

    ❓ Frequently Asked Questions

    Is this for the inner foldable display or the outer cover screen? +

    This is the inner main 6.9″ foldable display only. The outer 3.6″ cover pOLED on the Razr 60 is a separate part with a different connector and different size — order it separately if your outer screen is damaged.

    Will it fit my Razr 60 Ultra (2025)? +

    No. The Razr 60 Ultra has a different chassis size, different inner panel dimensions and a different display flex pinout. This part is for the standard Razr 60 (2025) only — XT2551 series.

    Does it support full 120Hz like the original? +

    Yes. This BQ7 OLED batch supports 120Hz operation on a real LTPO foldable backplane — vendor-confirmed. Smooth scrolling, fast touch tracking, and HDR10+ playback are all retained.

    Should I peel the protective film on top? +

    No — never peel the ultra-thin protective layer. It is bonded as part of the panel, not a removable factory film. Peeling it will destroy the display surface and void the warranty.

    Is the hinge included? +

    No — the hinge and mid-frame assembly are not included. You transfer your original hinge from the old display assembly. The BQ7 panel ships with the OLED, integrated touch digitiser, pre-fitted UTG layer, and the hinge-side display flex tail.

    Can I install this myself, or do I need a repair shop? +

    Foldable phone display swaps are significantly harder than rigid phone screen swaps. We strongly recommend a professional workshop with prior foldable phone experience. The crease region is unforgiving of incorrect handling and the foldable adhesive is single-use.

    My Razr 60 has a vertical line down the fold — will this fix it? +

    Yes. A vertical coloured line along the centre fold is the most common foldable failure mode and is caused by panel substrate fatigue at the hinge. A fresh BQ7 OLED restores the full inner display.

    Does HDR10+ still work after the swap? +

    Yes — HDR10+ tone-mapping is retained. The BQ7 panel reproduces the wide colour gamut and contrast range of the original Razr 60 inner display so HDR Netflix, YouTube and gallery playback continues to work.

    What's the difference between BQ7 aftermarket and OEM service? +

    OEM service uses Motorola's original-spec service panel at the official Motorola repair price. BQ7 is the top tier of aftermarket — same foldable substrate, full 120Hz, full HDR10+, real per-panel QC and a 12-month replacement warranty, at a notably lower price point.

    What does the 12-month warranty cover? +

    Manufacturing defects: dead pixels, panel failure, touch failure, brightness uniformity faults, display driver fault, hinge-flex continuity failure. Excludes physical damage from drops, water, peeled UTG layer, or installation mistakes. Always test the panel before resealing the rear cover — install errors are not covered.

    Browse Related Categories
    Repair Tools
    🛡️

    The JPC Mobile Quality Seal

    Held in stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Bench-tested by working repair technicians before listing. 12-month warranty on every BQ7 foldable OLED. Australia-wide shipping with tracking, packed in rigid foam to prevent crease damage in transit.

    🇦🇺
    Brisbane Stock
    ⚡
    2–4 Day Dispatch
    🛡️
    12-Month Warranty
    📞
    0480 039 913

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    BQ7 OLED Assembly – Motorola Moto Razr 60 – Inner Foldable Display 6.9″ 120Hz LTPO Screen Replacement JPC MOBILE ACCESSORIES

    BQ7 OLED Assembly – Motorola Moto Razr 60 – Inner Foldable Display 6.9″ 120Hz LTPO

    $304.80