BQ7 Rear Camera Lens Glass Set for iPhone 12 Pro Max
Replace cracked, chipped or heavily scratched outer camera cover glass on an iPhone 12 Pro Max with this BQ7 three-piece rear camera lens glass set. The package includes adhesive tape and is intended to replace the three separate exterior glass covers above the rear camera lenses. It does not include the internal camera module, camera frame, rear housing, tools or installation labour.
This is a model-specific repair part for the iPhone 12 Pro Max. It is not a camera lens protector that sticks over intact factory glass. Check the device model and inspect the damage before ordering so you can distinguish broken exterior cover glass from a fault inside the camera module.
Key features
-
Three-piece set: Includes three rear camera lens glass pieces for the iPhone 12 Pro Max camera array.
-
Adhesive included: Supplied with matching adhesive tape for installation.
-
BQ7 quality: Listed by the verified supplier as BQ7 transparent replacement glass.
-
Model-specific fit: Intended only for iPhone 12 Pro Max models A2342, A2410, A2411 and A2412.
-
Part only: No phone, camera module, rear housing, tools, cleaning materials or labour are included.
-
Professional installation recommended: Correct preparation and alignment are important for camera clarity and dust control.
Compatible iPhone models
- iPhone 12 Pro Max A2342
- iPhone 12 Pro Max A2410
- iPhone 12 Pro Max A2411
- iPhone 12 Pro Max A2412
This set is not listed for the iPhone 12, iPhone 12 mini or iPhone 12 Pro. Those models use different camera layouts or glass dimensions. Confirm the phone is an iPhone 12 Pro Max before removing any damaged glass or adhesive.
What this part replaces
The supplied glass pieces replace the exterior covers that sit above the rear camera lenses. They may be suitable when the outer glass is visibly cracked, chipped, missing or scratched while the camera underneath still focuses and records correctly. Replacing damaged cover glass can remove an obstruction from the camera's optical path, but the outcome depends on the condition of the camera module and the quality of the installation.
This part does not repair an internal camera sensor, autofocus mechanism, image stabilisation system, flash, wiring fault, liquid damage or software problem. If the camera shakes, fails to focus, shows a black image, displays an error or remains blurry when the outer glass is clean and intact, further diagnosis may be required. Do not assume that every camera symptom is caused by the lens cover.
Confirm the damage before ordering
Inspect the exterior glass under good lighting. Surface cracks, chips or a missing section can usually be seen without opening the phone. If dirt or moisture has entered through broken glass, the camera area may also need careful cleaning and inspection. Damage to the underlying lens or module may require a different part.
Compare the shape and size of the supplied pieces with the damaged covers before removing the adhesive backing. The product image is for identification, but small production details can vary. Stop if the part does not align naturally with the iPhone 12 Pro Max camera openings.
Installation guidance
Camera lens glass replacement involves removing sharp fragments and old adhesive near delicate camera components. Power off the device and protect the exposed camera lenses from debris. Wear eye protection, use controlled tools and avoid pushing broken glass toward the camera module. Heating, prying and cleaning should be performed carefully to prevent cosmetic damage to the surrounding camera frame or rear housing.
Remove all loose glass and old adhesive without scratching the camera module or painted surfaces. The bonding area must be clean, dry and free from dust, grease and fragments before the new adhesive is applied. Trapped debris can remain visible in photos, while poor adhesion can allow dust or moisture to enter later.
Test alignment before committing the adhesive. Position each lens glass squarely without pressing on the internal camera lens. After installation, inspect the seal around every piece and test all rear camera modes, focus ranges, flash and image clarity before returning the device to normal use.
Any repair that opens or alters an original seal can affect the device's water and dust resistance. This replacement does not restore or certify the original IP rating. Avoid submersion and unnecessary liquid exposure after repair.
Product identification
-
Brand / quality: BQ7
-
Part type: Rear camera lens cover glass set
-
JPC and supplier SKU: BQ7Cglass-12PM
-
Supplier item ID: 63824
-
Package quantity: 3 glass pieces
-
Adhesive: Included
-
Installation: Professional installation recommended
-
Global barcode: None verified
The supplier item ID 63824 is a catalogue reference, not a verified UPC, EAN or GTIN. It is therefore not presented as a global barcode for Google Merchant Center or other sales channels.
Package contents
- 3 x BQ7 rear camera lens glass pieces for iPhone 12 Pro Max
- Matching adhesive tape
No installation tools, cleaning solution, rear camera module, camera frame, rear housing, phone or repair service are included.
Availability
At the time of this review, Shopify recorded five local units and Crazy Parts showed this exact SKU in stock in both Sydney and Melbourne. The product remains active and can continue selling through supplier-order fulfilment when local shelf stock is unavailable, subject to the supplier's live availability at the time of order.
Pricing
The listed price is for the three-piece BQ7 lens glass set only, including GST. It is not an installed camera-glass repair price. Current Australian part-only comparisons reviewed during this update ranged from A$5.40 to A$5.95 for comparable three-piece iPhone 12 Pro Max lens-glass sets, while a lower-priced Polar Tech listing was sold out. JPC's A$6.27 price was retained because it remains close to current available competitors and provides a sustainable margin on the recorded cost.
Supplier warranty and Australian Consumer Law
Crazy Parts currently lists a 12-month supplier warranty for this exact SKU. That is supplier-provided coverage and is subject to the supplier's published warranty conditions, exclusions and assessment process. JPC Mobile does not add a separate voluntary product warranty beyond the verified supplier coverage stated here.
Physical damage, incorrect fitting, contamination, use of unsuitable tools, excessive heat, adhesive removal, impact, liquid exposure or damage caused during installation may fall outside supplier warranty terms. Inspect the parts before installation and retain order information if a claim is required.
Nothing on this page excludes, restricts or modifies any consumer guarantee, right or remedy that cannot lawfully be excluded under the Australian Consumer Law. Consumer rights apply independently of any supplier or voluntary warranty.
Frequently asked questions
How many lens glass pieces are included?
Three. The verified supplier package includes three rear camera lens glass pieces for the iPhone 12 Pro Max, plus adhesive tape.
Is this a camera protector?
No. It is a replacement for damaged exterior camera cover glass. It is not an overlay designed to protect intact original glass.
Does this include the rear camera module?
No. The internal camera module is a separate part and is not included.
Will it fix a blurry camera?
It may help when damaged or contaminated outer cover glass is causing the blur. It will not fix an internal camera, focus, stabilisation, software or liquid-damage fault.
Does it fit the iPhone 12 Pro?
No. This listing is specifically for the iPhone 12 Pro Max models shown above.
Is adhesive included?
Yes. Matching adhesive tape is included with the three-piece set.
Can I install it myself?
Installation is possible for an experienced repairer, but the camera area is delicate and broken glass can be hazardous. Professional installation is recommended.
