Brisbane Technical Hub

Local BQ7 Incell LCD stock at our Forest Lake counter. Walk-in pixel and touch test before fit. Full functionality test after install. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

Authenticity Guaranteed

Genuine BQ7 Incell LCD stock. Direct supply chain. Not relabelled IQ5, AQ7 or no-name LCD sold as BQ7. Every panel carries the BQ7 grade sticker.

Reliable Dispatch

Orders ship in 2-4 business days from Brisbane. Tracked dispatch on every order. Each panel is bench-tested for pixels, touch and brightness. Foam-protected dispatch box.

Hot-air station, microscope and flux work needed. The IC chip flex is desoldered from the original and reflowed onto this new assembly.

Not a DIY-friendly install. Bring the part and your iPhone 16 Plus to a microsoldering shop. Most repair shops charge a small bench fee for the chip transfer.

Both functions return after a successful chip transfer. The chip carries the panel calibration data iOS reads on every boot.

Pick the BQ7 Diagnosable variant instead. No microsoldering. Plug and play. True Tone preserved automatically.

LCD uses a steady LED backlight. No PWM flicker. Customers with eye strain or migraines on OLED prefer this build.

Significantly less than Soft OLED or Hard OLED equivalents. Great for resale flips, school phones or trade-in builds.

Capacitive multi-touch glass digitiser. Smooth response across the panel. No dead zones, no ghost touch.

Pixel-perfect Dynamic Island cutout matches OEM. Transfer the original earpiece and TrueDepth flex. Face ID returns to full function.

Vendor-confirmed 12-month replacement warranty. Covers manufacturing defects on the panel and digitiser. Excludes physical damage.

Every panel is tested before dispatch. Pixels checked, touch swept, backlight verified. No dead-on-arrival units.

Spider-web or shattered glass face. Touch may still work but glass shards risk fingers.

Touch ignores input or registers ghost taps with no finger present. Digitiser layer is damaged.

Display will not light up. Phone still rings and vibrates. Panel or backlight has failed.

Black dots, vertical lines or coloured bars on the panel. Common after a hard drop on concrete.

Faint static image left on the original OLED. LCD swap eliminates burn-in completely going forward.

Original OLED uses PWM dimming below 50 percent brightness. Some users get headaches. LCD removes PWM entirely.

Sits above IQ7, IQ5 and AQ7 in the LCD grade ladder. Tightest pixel tolerances, highest backlight uniformity.

Steady LED backlight with no pulse-width modulation. Comfortable for PWM-sensitive eyes and headache-prone users.

Bonded multi-touch digitiser. Smooth response across the full 6.7-inch panel. No dead zones, no ghost touch.

Matches OEM resolution exactly. iOS renders at native pixel density. No scaling artefacts.

Pixel-perfect cutout for the TrueDepth array. Face ID returns after sensor flex transfer.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Every panel is tested before dispatch. Pixels checked, touch swept, backlight verified. No dead-on-arrival units.

Sealed in foam-lined rigid box. Glass face protected from impact. Connectors held flat against transit damage.

No pulse-width modulation flicker. Comfortable for eye-strain and migraine-prone users. OLED dims by flickering pixels.

Costs significantly less than aftermarket OLED. Ideal for resale phones, school phones or budget repairs.

LCD pixels never suffer burn-in. Static UI elements like the status bar will never ghost on this panel.

OLED self-emissive pixels deliver true blacks. LCD blacks are dark grey because the backlight cannot fully switch off.

Original OLED hits 2000 nits peak HDR. This LCD hits around 500 nits. OLED looks brighter in direct sunlight.

Original OLED covers the P3 wide colour gamut. LCD covers standard sRGB. HDR content looks more vivid on OLED.

Cost-conscious budget tier for cash-strapped customers. Higher margin per repair than OEM-grade OLED swaps.

Restore tradeins for Marketplace and Gumtree resale. Lower cost in keeps the resale margin healthy.

Buyers who get headaches or eye strain on factory OLED. The LCD backlight removes PWM flicker entirely.

High-risk-of-damage builds where a cheaper screen makes future drops less painful on the wallet.

FITS — iPhone 16 Plus (6.7″)

A3082 — USA, Puerto Rico

A3289 — Canada, Japan, Mexico, Saudi Arabia, UAE, Qatar

A3291 — China Mainland, Hong Kong, Macao

A3290 — Rest of World incl. Australia, UK, EU

DOES NOT FIT

iPhone 16 — 6.1″, smaller chassis, different connector position.

iPhone 16 Pro and Pro Max — ProMotion 120Hz panel, different bezel and titanium frame.

iPhone 15 Plus — same Dynamic Island and USB-C, but no Camera Control button cutout. Year-specific moulding.

iPhone 14 Plus — uses notch (not Dynamic Island) and Lightning connector.

iPhone 13 Pro Max — same 6.7″ size but ProMotion panel and notch.

Complete 6.7″ Incell LCD with bonded touch digitiser. Dynamic Island cutout. Back plate pre-installed.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Sealed in a foam-lined rigid box. Pre-dispatch bench test card included for traceability.

Display IC chip flex (microsoldering job), earpiece speaker, proximity sensor flex and front camera flex.

Power off. Remove the two P2 pentalobe screws beside the USB-C port.

Soften the adhesive with a heat pad. Use a suction cup and opening pick from the right side. Avoid the Camera Control flex.

Remove the metal cover plates. Disconnect battery first. Then disconnect the display flex connectors.

Heat the IC flex with hot air. Lift the chip from the original screen. Reflow it onto the new BQ7 assembly under a microscope.

Carefully transfer the earpiece speaker, proximity sensor and front camera flex from the original screen.

Reconnect display flex and battery. Power on. Test display, touch, Face ID, True Tone, earpiece and Camera Control. Then reseal.

Apply fresh waterproof adhesive strips. Press the screen home. Refit pentalobe screws. Done.

1 to 2 business days. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

2 to 3 business days after dispatch. Tracked the whole way.

3 to 5 business days after dispatch. Foam-protected packaging on every panel.

Covers manufacturing defects. Excludes physical damage and install errors. Always test before sealing.