PULL-A means this part was removed from a real Sony PlayStation console — not manufactured as a copy.

The "A" grade means it was visually inspected and passed. Straight pins, clean body, no corrosion or damage.

Repair professionals prefer PULL-A parts because they match the original exactly and solder reliably.

No. This port is for the PS4 Slim (CUH-2000 series) and PS4 Pro (CUH-7000 series) only.

The original PS4 (CUH-1000 series) uses a different connector and motherboard layout.

Check the sticker on the bottom of your console to confirm your model number before ordering.

Yes. The HDMI port is surface-mounted on the PS4 motherboard. There is no plug-in alternative.

You need a hot-air rework station to remove the old port and a fine-tip soldering iron to reflow the new one.

If you are not experienced with board-level soldering, bring the console to our Forest Lake store for professional installation.

Maybe — but first rule out the easy causes. Try a different HDMI cable and a different TV.

Also try booting into Safe Mode (hold power for two beeps with the console off). This resets video settings.

If none of those work and you can see bent or broken pins, this HDMI port is the correct part to order.

The most common cause is the cable being yanked sideways or the console being dropped while plugged in.

Hot-plugging — connecting HDMI while the PS4 is powered on — can also weaken the port over time.

Repeated plug and unplug cycles gradually loosen solder joints, especially on earlier PS4 Slim units.

Yes. The PS4 has a separate HDMI encoder chip (MN86471A) that can also cause no-video faults.

If the port looks physically fine — no bent pins, sits straight — the chip may be the cause instead.

A trained technician can diagnose the difference. Call us on 0480 039 913 for expert advice before ordering.

Not reliably. The port has many pins that connect to the motherboard surface. A hot-air station is the correct tool.

Attempting this with only a standard iron risks lifting pads, bridging pins, or permanently damaging the board.

A botched repair also makes it harder and more expensive for a professional to fix afterwards.

No. This is a PULL-A hardware connector part. It does not come with a warranty.

Every unit is visually inspected before dispatch but no return or warranty applies to used hardware parts.

We recommend ordering from a trusted supplier — call 0480 039 913 if you have questions about the part before ordering.

Yes. JPC Mobile offers PS4 HDMI port repairs at our Forest Lake store.

Our technicians handle the full board-level repair including diagnosis, port removal, and reflow.

Call 0480 039 913 or walk in to Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 for a quote.

Orders ship from Brisbane within 2–4 business days via Australia Post.

Brisbane metro: 1–3 days after dispatch. Sydney and Melbourne: 3–5 days.

Perth and regional areas: 5–8 days after dispatch. Tracking included on all orders.