OPPO Find X3 Pro / Find X3 Battery Replacement — BLP831 AMPLUS
This is a BLP831 replacement battery. It suits the OPPO Find X3 Pro and Find X3. The grade is AMPLUS. AMPLUS means Aftermarket Plus. The chemistry is lithium-polymer. The device capacity is 4500mAh. It uses a dual-cell design. Nominal voltage is 7.74V. Max charge voltage is 8.90V. Energy is about 17.02Wh. Every unit ships at 0 cycles. A new cell, connector and PCBA are used. It carries a 12-month warranty.
Signs You Need A New Battery
These faults all point to a worn or failed battery.
The charge falls from full within a few hours.
The phone turns off while it still shows charge.
The battery stalls or refuses to fill up.
The back cover lifts or the screen bulges.
The phone feels hot on light use or idle.
The reading jumps or sticks at odd numbers.
Backed By A 12-Month Warranty
This AMPLUS battery is covered for 12 months against manufacturing defects.
Brisbane Technical Hub
Based locally at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Bench fitting available over the counter.
Quality Tested
Every AMPLUS cell is bench tested before dispatch. New cell, connector and PCBA in each unit.
Reliable Dispatch
Orders ship in 2-4 business days from Forest Lake. Tracked Australia Post on every order. Australia-wide delivery.
Parts Only — Professional Fitting Advised
This is the battery part on its own. The Find X3 Pro swap needs heat and pro tools. Book our Forest Lake bench for fitting.
What Does AMPLUS Grade Mean?
AMPLUS stands for Aftermarket Plus. It sits above generic clones. It sits below genuine OPPO. We label it honestly.
Aftermarket Plus Tier
A higher grade than cheap clone cells. Built to match OEM behaviour.
New Cell And PCBA
Each battery uses a new cell, connector and PCBA. Zero cycles at dispatch.
Safety Protections
Overcharge, overheat, overload and short-circuit protection are built in.
Honest Labelling
This is aftermarket. It is not a genuine OPPO service part. We never claim otherwise.
Confirm It Is The Battery First
Run these checks before you order the part.
- The charge drops from full within a few hours.
- The phone shuts down while it still shows charge.
- Battery health in settings reads low or poor.
- The back cover or screen bulges from a swollen cell.
- The phone only stays on while plugged into power.
- The phone runs hot on light use or when idle.
- A different cable and charger make no difference.
- The charging port still works with another device.
Install Notes — Read Before Fitting
- Drain the phone below 25% before you start work.
- Heat softens the back adhesive so the cover lifts safely.
- Never bend or puncture the cell. A pierced cell can catch fire.
- Disconnect the old battery flex first to protect the board.
- Lift the old cell with gentle heat and a plastic tool only.
- Use an anti-static strap during the whole repair.
- Seal with fresh adhesive to keep dust and water out.
- Charge and drain fully two or three times to calibrate.
This is an advanced repair. Book our Forest Lake bench if you are unsure.
Tools You Will Need
Softens the adhesive on the back cover.
Lifts the back cover to start the opening.
Slide around the edges to cut the adhesive.
Removes the inner bracket and shield screws.
Unclips the battery flex without a spark.
Re-seals the back cover after fitting.
Full Specifications
Compatibility — Fits and Does Not Fit
Check your model in Settings, About Phone, before you order.
Find X3 Neo (CPH2207) — uses the BLP825 battery, not BLP831.
Find X3 Lite (CPH2145) — uses the BLP811 battery, not BLP831.
Find X2, X2 Pro and Find X5 series — different batteries and sizes.
Browse our full parts range for other OPPO models.
AMPLUS Grade vs Cheap Clone
New cell, connector and PCBA at 0 cycles.
Full safety protections and RoHS and CE certified.
Backed by a 12-month warranty.
Often built from recycled or aged cells.
Capacity claims are often inflated and untested.
Life is short and protections may be missing.
Book A Bench Fitting In-Store
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
Local Forest Lake bench for OPPO battery swaps.
AMPLUS cells bench inspected before dispatch.
Tracked dispatch in 2-4 business days, Australia-wide.
Shipping & Delivery
- Dispatch: Orders ship in 2-4 business days from Forest Lake QLD.
- Brisbane Metro: Usually 1-2 days after dispatch.
- Sydney & Melbourne: Usually 3-5 days after dispatch.
- Perth & Regional: Usually 5-8 days after dispatch.
- Tracking: A tracked Australia Post number is sent on dispatch.
- Pickup: Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
Pay your way — Afterpay and Klarna available at checkout.
Frequently Asked Questions
Browse More Repair Parts
Explore batteries, parts, and repair tools in the full range.
Pay your way — Afterpay and Klarna available at checkout.
JPC Mobile — OPPO Find Repair Parts Specialist, Forest Lake Brisbane
AMPLUS Find X3 Pro batteries dispatched from Forest Lake QLD. Australia-wide tracked shipping.
Available online and in-store at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
Payment Options
We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.
Shipping & Processing Information
Processing Time
All orders require 2-4 business days for processing, regardless of shipping method.
This includes order verification, picking, packing and preparation for dispatch.
You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.
Shipping Methods
Standard: 3-7 business days in transit after processing
Express: 1-2 business days in transit after processing
Express shipping only affects delivery time once dispatched, not processing time.
Express shipping does not expedite the 2-4 business day processing time.