Kinglas Galaxy S10 G973F 3D Full-Coverage Glass

Protect the curved display on your Samsung Galaxy S10 with this Kinglas 3D full-coverage tempered glass screen protector. The clear glass follows the display edges and is designed for use with the Galaxy S10's ultrasonic in-screen fingerprint reader.

Compatibility

• Samsung Galaxy S10 SM-G973F and SM-G973-series models with 6.1-inch display

Not compatible with: Galaxy S10+, S10e, S10 5G, S10 Lite, or other Galaxy models. Confirm the model number before ordering.

Key features

• 3D thermally curved glass for full-display coverage
• Less than 0.15 mm thick, as shown in the manufacturer imagery
• Designed around the Galaxy S10 ultrasonic fingerprint-sensor area
• Oleophobic surface helps reduce fingerprints and smudges
• Anti-shatter film helps hold broken glass fragments together
• Clear finish with black edge treatment

Fingerprint and case guidance

Fingerprint performance can vary with installation, finger condition and device settings. After fitting, enable increased touch sensitivity if needed and delete and re-register your fingerprints. Do not rely on fingerprint unlock as your only access method until it has been tested.

Case compatibility depends on the case lip. A tight case can lift the curved edges of a full-coverage protector.

Installation

1. Clean and dry the screen thoroughly, removing every dust particle.
2. Align the camera opening, fingerprint area and curved edges before lowering the glass.
3. Press evenly and work remaining air towards the edges.
4. Allow the adhesive to settle before fitting a case or re-registering fingerprints.

What's included

• 1 × Kinglas Galaxy S10 3D full-coverage tempered glass protector

No protector can make a screen unbreakable. Protection and fingerprint performance depend on correct installation, impact conditions and device settings.

Warranty

JPC Mobile does not offer an additional or voluntary product warranty on screen protectors. This does not exclude rights under Australian Consumer Law.