• Send Us a Message
    • Skip to content
    iPhone 14 Pro Rear Housing Silver Back Glass Mid Frame Small Parts MagSafe Apple Logo PULL-A A2890 Housing JPC MOBILE

    iPhone 14 Pro Rear Housing Silver Back Glass Mid Frame Small Parts MagSafe Apple Logo PULL-A A2890

    $0.00 - $0.00
    $0.00
    $185.70
    $185.70 - $185.70
    $185.70
    SKU Pull-RearH-14P-SLV
    PULL-A Grade · Silver Housing · A2890 / A2650 / A2889 / A2892 · Apple Logo Included

    iPhone 14 Pro Rear Housing in Silver with Pre-Installed Small Parts (Back Glass, Mid Frame, MagSafe, Side Buttons, SIM Tray)

    Genuine Apple PULL-A donor rear housing for iPhone 14 Pro. Silver colour matches the original Apple finish. Pre-installed small parts include side buttons and button flex. Also button bracket, SIM tray and rear camera lens covers. Plus wireless charging coil, MagSafe magnet ring, speaker mesh and mic mesh. Apple logo on the back panel.

    Master-level repair. Full teardown is required to transfer the screen, battery, logic board and cameras. PULL-A grade carries 7-day dead-on-arrival cover only. Bench-inspected at Forest Lake before dispatch.

    Fitment Check Parts Included PULL-A Grade Install Scope Full Specs FAQs

    Brisbane Technical Hub

    Stocked at our Forest Lake repair workshop. The same PULL-A donor housings our own techs use on bench rebuilds. Inspected before any sale.

    Authenticity Guaranteed

    Genuine Apple housing pulled from a working donor unit. Apple logo intact. Silver colour matches the original factory finish. No clones.

    Reliable Dispatch

    Standard 2-4 business day ship Australia wide. Packed with foam to keep the back glass safe. Tracked Australia Post or courier on every order.

    Fits iPhone 14 Pro Silver ONLY · Does NOT Fit Other iPhone 14 Models or Colours

    FITS — iPhone 14 Pro (Silver)

    • iPhone 14 Pro — A2650 (USA)
    • iPhone 14 Pro — A2889 (Canada, Mexico, Japan, Saudi Arabia)
    • iPhone 14 Pro — A2890 (Global, Australia, UK, EU)
    • iPhone 14 Pro — A2892 (Russia)
    • 6.1-inch Super Retina XDR OLED chassis
    • Dynamic Island front sensor housing
    • Released September 2022
    • Silver factory colour finish only

    DOES NOT FIT (Avoid Wrong Purchase)

    • iPhone 14 — different chassis. No telephoto camera cut-out.
    • iPhone 14 Plus — larger 6.7-inch chassis. Different frame.
    • iPhone 14 Pro Max — larger 6.7-inch chassis. Different frame and camera bump.
    • iPhone 13 Pro — previous generation. Different camera cut-out and frame.
    • iPhone 15 Pro — newer generation. Titanium frame, different connectors.
    • Other Pro colours — Space Black, Gold and Deep Purple housings sold separately.
    Confirm your iPhone model number and colour before ordering.

    Open Settings, then General, then About. Look for the "Model Number" line. Australian iPhones usually show A2890. Match the A-number to the FITS list. Wrong A-number means the housing will not fit. Wrong colour means a mismatched look.

    Pre-Installed Small Parts Inside the Assembly

    This is a complete rear housing build. Pre-installed parts save bench time on a teardown rebuild.

    Back Glass Panel

    Silver finish with Apple logo on the back. Bonded to the mid frame.

    Mid Frame / Chassis

    Stainless steel band. Aluminium internal frame. Antenna lines intact.

    Side Buttons

    Power, volume up, volume down and mute switch buttons fitted.

    Side Button Flex

    Volume and mute flex cable pre-routed. Button bracket clipped in place.

    SIM Card Tray

    Silver-tinted SIM tray to match. Sealed with rubber gasket for water-resistance.

    Rear Camera Lens Glass

    Three lens covers in place. Telephoto, wide and ultra-wide cut-outs aligned.

    Wireless Charging Coil

    Qi and MagSafe charging coil pre-fitted. Connector ready for transfer.

    MagSafe Magnet Array

    Full magnet ring fitted around the wireless coil. Holds MagSafe accessories.

    Speaker and Mic Mesh

    Bottom speaker and microphone mesh inserts in place. Anti-dust mesh intact.

    Internal Brackets

    Inner bracket clips and stand-offs for screw points all present.

    Not included: screen, battery, logic board, cameras, Taptic Engine, Face ID modules. These transfer from your old phone during install.

    Apple logo factory-printed on the silver back glass. The rebuilt phone looks original from the back.

    PULL-A Grade Honesty Disclosure

    PULL-A means pulled from a working donor iPhone. Honestly labelled. Not new-OEM stock.

    Where the housing comes from

    Donor units come from insurance write-off claims, trade-in returns and buy-back stock. The phones are stripped for parts.

    What Grade A means

    No deep dents, no major scratches, no cracked back glass. Apple logo unmarked. Camera cut-outs clean.

    Why Apple does not sell this

    Apple does not sell rear housing assemblies as service parts. PULL-A donors are the only genuine Apple route.

    No manufacturer warranty

    No Apple warranty on a donor housing. JPC covers 7-day dead-on-arrival. Bench-test on arrival.

    Genuine vs aftermarket clone

    PULL-A keeps real Apple antenna lines and magnet placement. Aftermarket clones often misalign MagSafe.

    Honest grade label

    We never sell PULL-A as new-OEM. PULL-A is aftermarket-grade donor stock. Honest label every time.

    Master-Level Install Scope (Full Phone Teardown)

    A rear housing swap is the most complex iPhone repair. Every internal part transfers to the new shell.

    Screen and Face ID

    Display assembly with Face ID dot projector transfers. Pair to logic board after install.

    Battery transfer

    Original battery moves to the new bay. Use new adhesive strips. Or fit a fresh GreenCell battery.

    Logic board transfer

    Full board transfer with all connectors. Match the screw layout in the new chassis.

    Rear camera transfer

    Telephoto, wide and ultra-wide modules move across. Lens covers stay with the new housing.

    Taptic Engine transfer

    Taptic Engine and bottom speaker transfer to the new housing. Refit screws to torque.

    Earpiece and front sensors

    Earpiece speaker and front sensor cluster move with the screen. Reattach to the new chassis.

    Tools and skill required

    Pentalobe, Phillips, Y000 drivers, plastic spudgers, anti-static work mat. Master-level skill needed.

    Estimated bench time

    2-3 hours for an experienced tech. Longer for a first-time housing swap.

    Damage from incorrect install is not covered. Bring the rebuild into the Forest Lake workshop if you want bench help.

    Reasons to Stock the iPhone 14 Pro Silver Rear Housing

    Repair workflow reasons your bench needs this part on the shelf.

    Cracked back glass jobs

    Back glass damage on iPhone 14 Pro is a top-five repair callout. Whole-housing swap is cleaner than glass-only.

    Bent or dented frame rebuilds

    A drop on the corner often bends the chassis. Whole-housing swap restores frame straightness.

    Insurance write-off rebuilds

    Insurance assessors approve whole-housing swaps for cosmetic claims. PULL-A is the standard repair input.

    Genuine Apple feel

    PULL-A keeps the original Apple finish and antenna lines. Customers cannot tell the rebuild from new.

    Pre-installed parts save time

    Side buttons, MagSafe coil and SIM tray fitted. Saves 30-45 minutes per bench job.

    Refurb resale uplift

    A clean Silver housing lifts trade-in value. Refurb units sell faster with cosmetic-A bodies.

    Built for Every iPhone Repair Workflow in Australia

    Independent iPhone Repair Shops

    Cracked-back jobs roll in every week. PULL-A Silver housing matches the original. Fast bench rebuild.

    Refurb / Re-Sell Operations

    Trade-in iPhone 14 Pro units often have damaged backs. Whole-housing swap restores A-grade resale value.

    Multi-Brand Mobile Workshops

    Sit this PULL-A housing next to your Samsung and Pixel rear glass stock. One supplier covers them all.

    Logic-Board Repair Specialists

    Use a known-good housing to test a board after rework. Confirm the rebuild is a real working unit.

    eBay AU Resellers and Flippers

    Broken-back iPhone 14 Pro units flip back to working stock. Silver housing is a popular resale colour.

    Insurance Assessment Shops

    Drop and water claims often kill the back glass. PULL-A is the standard repair input for insurance fix quotes.

    Mobile Repair Vans / Field Service

    Whole-housing swaps need the right shell on the van. Silver A2890 is a high-fault Australian colour.

    Trainee Technicians and Students

    TAFE and private repair-school students learn full teardown on a real PULL-A donor housing.

    Apple-Authorised Shadow Stock

    Out-of-warranty iPhone 14 Pro rebuilds. PULL-A keeps the finished phone looking original Apple.

    Forest Lake Walk-In Customers

    Walk in to Shop 3A, 152 Woogaroo St. Pick up the housing. Book a bench install on the spot.

    PULL-A Genuine Apple Housing vs Cheap Aftermarket Clone

    PULL-A Genuine Apple Donor Housing

    • Real Apple back glass with factory Apple logo print.
    • True Apple antenna lines and grounding points.
    • Original MagSafe magnet placement. Accessories snap dead-centre.
    • Original wireless coil location. Qi alignment is correct.
    • Stainless band finish matches the rest of the iPhone 14 Pro.
    • Small parts pre-installed and bench-inspected at Forest Lake.

    Cheap Aftermarket Clone Housing

    • Reproduction back glass. Apple logo print often off-centre.
    • Antenna lines copied poorly. Signal drop is common.
    • Generic magnet ring. MagSafe accessories snap off-centre.
    • Coil cut-out misaligned. Qi charging hits and misses.
    • Painted band finish. Colour does not match the iPhone 14 Pro stainless.
    • Empty shell. You fit every small part yourself.

    Full Technical Specifications

    Part Type

    PULL-A donor rear housing assembly with pre-installed small parts

    Grade

    PULL-A — pulled from working Apple donor unit, Grade A cosmetic

    Compatible Apple Models

    iPhone 14 Pro only — A2650 (USA), A2889 (Canada / Mexico / Japan / Saudi Arabia), A2890 (Global, Australia, UK, EU), A2892 (Russia)

    Colour

    Silver — matches the original Apple iPhone 14 Pro Silver factory finish

    Back Glass

    Genuine Apple back glass with factory-printed Apple logo

    Mid Frame Material

    Stainless steel outer band with aluminium internal frame

    Side Buttons Pre-Installed

    Power, volume up, volume down and mute switch with flex and bracket

    SIM Tray

    Silver-tinted SIM card tray with rubber gasket for water-resistance

    Rear Camera Lens Glass

    Three lens cover glass pieces — telephoto, wide, ultra-wide

    Wireless Charging Coil

    Qi and MagSafe wireless charging coil pre-fitted to the back glass

    MagSafe Magnet Array

    Full magnet ring around the wireless coil for MagSafe accessory snap

    Speaker and Microphone Mesh

    Bottom speaker mesh and microphone mesh inserts pre-fitted

    Internal Brackets

    Inner clips, stand-offs and screw points all in place for transfer

    Bench Inspection Pre-Dispatch

    Six-point check — frame, back glass, Apple logo, magnets, side buttons, lens covers

    Installer Skill Level

    Master-level — full phone teardown required, screen and logic board transfer

    Estimated Install Time

    2-3 hours bench time for an experienced iPhone repair technician

    Parts NOT Included

    Screen, battery, logic board, cameras, Taptic Engine, Face ID — all transfer from your old phone

    Stock Location

    Forest Lake QLD workshop — Brisbane technical hub

    Dispatch Window

    2-4 business days from order to ship

    Warranty

    PULL-A donor housing — 7-day dead-on-arrival cover only (no manufacturer warranty)

    In the Box

    1 x iPhone 14 Pro Silver rear housing assembly with pre-installed small parts (anti-static foam packed)

    Important Install & Safety Note

    Disconnect the iPhone battery before any teardown. Wear safety glasses when handling lithium-ion cells. Never bend or puncture a battery. A bent cell can vent or catch fire.

    Pair this housing with new battery adhesive strips during the rebuild. Pair with a fresh GreenCell battery if the original cell is tired. Damage from incorrect install is not covered by the 7-day cover.

    Browse Related Categories

    Repair Tools and Equipment

    iPhone 14 Pro Silver Rear Housing — Frequently Asked Questions

    Does this fit my iPhone 14 Pro?+
    It fits iPhone 14 Pro only. The compatible Apple model numbers are A2650, A2889, A2890 and A2892. Australian iPhones usually show A2890. Open Settings, then General, then About to check your phone. It does NOT fit iPhone 14, iPhone 14 Plus or iPhone 14 Pro Max. Wrong size, wrong frame.
    What small parts come pre-installed in the assembly?+
    Back glass with Apple logo, mid frame and stainless steel band. Side buttons, button flex and bracket all fitted. Also SIM card tray and rear camera lens covers. Plus wireless charging coil and MagSafe magnet array. Speaker mesh and microphone mesh in place. Inner brackets and screw points all set.
    Is the Silver colour a real match to the original Apple finish?+
    Yes. This is a genuine Apple PULL-A donor housing. The Silver finish comes from the Apple factory. It matches every other Silver iPhone 14 Pro made. Aftermarket clones use painted finishes that drift off-shade. PULL-A keeps the real Apple stainless band tone.
    Does MagSafe and wireless charging still work?+
    Yes. The wireless charging coil and MagSafe magnet ring are pre-installed. Original Apple placement keeps Qi alignment correct. MagSafe accessories snap dead-centre. Just transfer the rest of the phone to the new shell. Bench-test wireless on first power-up.
    What does PULL-A grade mean for a rear housing?+
    PULL-A means pulled from a working Apple donor unit. Grade A means clean cosmetic. No deep dents, no major scratches, no cracked back glass. The Apple logo is unmarked. Apple does not sell rear housings as a service part. PULL-A is the only genuine route. Honestly labelled — never sold as new-OEM.
    Can I install this myself?+
    Only if you are a master-level repair tech. A rear housing swap is the most complex iPhone repair. You must transfer the screen, battery, logic board, all cameras and the Taptic Engine. Bench time runs 2-3 hours. Bring it to our Forest Lake workshop if you want help.
    Does the housing have the Apple logo on the back?+
    Yes. The Apple logo is factory-printed on the silver back glass. The rebuilt phone looks original from the back. PULL-A donor housings keep the real Apple logo etch. Aftermarket clones often print the logo off-centre or at the wrong size.
    What about Face ID and the rear camera lens cover?+
    Face ID is paired to the logic board. It moves across with the screen and the board. This housing does not break the pairing. The rear camera lens cover glass is pre-fitted on the new housing. The camera modules transfer from your old phone. Lens covers stay put.
    Is there a warranty on the housing?+
    Apple does not sell rear housings as a service part. There is no manufacturer warranty on a donor housing. We cover dead-on-arrival cases for 7 days from delivery. That covers cracked glass, bent frame or dead small parts on arrival. Bench-test the housing on arrival before any teardown.
    How fast does it ship and can I collect from the workshop?+
    Standard 2-4 business days from our Forest Lake QLD workshop. We ship tracked Australia Post or courier. Brisbane Metro and Silver Coast addresses often land next day. Collection is welcome at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Pay your way — Afterpay and Klarna available at checkout.

    The JPC Mobile Quality Seal

    Genuine Apple PULL-A rear housing for iPhone 14 Pro in Silver. Pre-installed side buttons, button flex and SIM tray. Plus rear camera lens covers and wireless charging coil. Also MagSafe magnet array, speaker mesh and microphone mesh. Apple logo factory-printed on the back glass. Compatible Apple model numbers A2650, A2889, A2890 and A2892. Bench-inspected at our Forest Lake workshop before dispatch. Six-point check on frame, back glass, Apple logo, magnets, side buttons and lens covers. PULL-A donor with 7-day dead-on-arrival cover only. Visit us at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Brisbane technical hub. Standard 2-4 business day Australia ship.

    Forest Lake Stock Bench Inspected Sold Australia Wide 2-4 Day Dispatch

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    iPhone 14 Pro Rear Housing Silver Back Glass Mid Frame Small Parts MagSafe Apple Logo PULL-A A2890 Housing JPC MOBILE

    iPhone 14 Pro Rear Housing Silver Back Glass Mid Frame Small Parts MagSafe Apple Logo PULL-A A2890

    $185.70