• Send Us a Message
    • Skip to content
    BQ7 Diagnosable Incell LCD – iPhone 14 Pro Max – 120Hz, True Tone, No IC Chip Transfer Screen Replacement JPC MOBILE

    BQ7 Diagnosable Incell LCD – iPhone 14 Pro Max – 120Hz, True Tone, No IC Chip Transfer

    $0.00 - $0.00
    $0.00
    $157.80
    $157.80 - $157.80
    $157.80
    SKU BQ7-Incell-14PM-Diagnose
    ⭐ BQ7 INCELL LCD · BUDGET-SMART REPAIR TIER

    BQ7 Diagnosable Incell LCD – iPhone 14 Pro Max

    Cost-effective aftermarket Incell LCD for iPhone 14 Pro Max 6.7″. No IC chip transfer, no microsoldering, no third-party programmer. Run Apple's own built-in Diagnostics flow — the panel is recognised as a verified part, the "Unknown Part" warning clears, and True Tone is preserved. 120Hz support, native Dynamic Island. Fits A2651, A2893, A2894, A2895, A2896.

    ⚡ 120Hz Support
    🌗 True Tone Preserved
    🚫 No iOS Warning
    🇦🇺 Brisbane Stock

    📱 Compatibility — iPhone 14 Pro Max (6.7″) Only

    ✅ FITS — iPhone 14 Pro Max (6.7″)

    A2651 — USA

    A2893 — Canada / Japan

    A2894 — China Mainland

    A2895 — International incl. Australia / UK / Europe

    A2896 — Russia / additional regional variant

    ❌ DOES NOT FIT

    iPhone 14 Pro (6.1″) — different size, smaller chassis

    iPhone 14 / 14 Plus — no ProMotion, different connector

    iPhone 15 Pro Max — different connector layout, different bezel cuts

    iPhone 13 Pro Max — different chassis dimensions, no Dynamic Island

    iPhone 12 / 13 / 16 Pro Max — completely different connector and dimensions

    Verify your model number under Settings → General → About → Model Number before ordering.

    🎯 The Diagnosable Difference

    Standard aftermarket iPhone 14 Pro Max screens need the original IC chip microsoldered across — slow, fragile, expensive. BQ7 Diagnosable skips the soldering and skips third-party programmers entirely. Plug the new screen in, then run Apple's own built-in Diagnostics directly on the phone (iOS 17 self-service repair flow). The panel is recognised as a verified part — "Unknown Part" warning cleared, True Tone preserved.

    🚫

    No IC Chip Transfer

    No microsoldering. No hot-air rework on the original display IC. No risk of burning the donor screen. Saves 30–60 minutes of bench time per job.

    🍎

    Apple's Built-In Diagnostics

    Uses Apple's own Self-Service Repair diagnostic flow on iPhone 14 Pro Max. No JC, no JCID, no iCopy, no third-party programmer. Just the phone itself.

    ✅

    No "Unknown Part" Warning

    After Apple Diagnostics completes, iOS no longer shows "Unable to verify display" under Settings → General → About → Parts & Service History.

    🌗

    True Tone Preserved

    Apple's diagnostic restores the True Tone toggle in Settings → Display & Brightness. Adapts colour to ambient light just like factory.

    ⚡

    120Hz Support

    High refresh rate operation for smooth scrolling and fast touch response. Vendor-confirmed 120Hz support on this BQ7 incell LCD batch.

    🎯

    Dynamic Island Native

    TrueDepth cutout matched precisely. Dynamic Island animations and Live Activities render correctly out of the box.

    🔲

    Incell Touch Layer

    Touch digitiser laminated into the LCD stack. Thinner profile, fewer layers, responsive multi-touch tracking.

    💎 Incell LCD vs OEM OLED — Honest Comparison

    The factory iPhone 14 Pro Max ships with an OLED panel. This BQ7 product is an aftermarket Incell LCD — a budget-smart repair option. We list every trade-off honestly so you know exactly what you're buying.

    ✅ Incell LCD (This Product)

    Price tier: Budget-smart aftermarket repair option

    Panel type: Incell LCD with backlight

    Refresh rate: 120Hz support

    True Tone: Preserved after Apple Diagnostics

    Dynamic Island: Native cutout, fully working

    Always-On Display: Not supported — disable in Settings

    Blacks: Backlit dark grey (LCD limitation)

    ⚠️ Factory OEM OLED (Reference)

    Price tier: Premium OEM cost

    Panel type: LTPO Soft OLED, self-emissive

    Refresh rate: Adaptive 1Hz – 120Hz ProMotion

    True Tone: Yes

    Dynamic Island: Native

    Always-On Display: Yes (1Hz lockscreen)

    Blacks: True black (pixels off)

    Bottom line: If you need full OEM OLED behaviour (true blacks + Always-On Display), choose our Soft OLED listing. If you want a working 120Hz display with True Tone and Dynamic Island at a much lower cost, this Incell LCD is the smart pick.

    ⚠️ Mandatory Post-Install Settings (Incell LCD)

    Because this is an Incell LCD (not OLED), two iOS settings must be turned off after install. Leaving them on causes the backlight to stay on continuously — leading to overheating and rapid battery drain.

    🌑 1. Turn OFF Always-On Display

    Path: Settings → Display & Brightness → Always On Display → toggle OFF

    LCD cannot dim to 1Hz like OLED. Leaving AOD on keeps the backlight running, which heats the phone and drains the battery quickly.

    ☀️ 2. Turn OFF Auto-Brightness

    Path: Settings → Accessibility → Display & Text Size → Auto-Brightness → toggle OFF

    Aftermarket LCD ambient light response can hold the backlight at maximum. Switching to manual brightness avoids overheating and extends battery life.

    These two steps take 30 seconds and are vendor-recommended for every aftermarket Incell LCD on iPhone 13 / 14 / 15 / 16 series Pro and Pro Max.

    📋 Full Technical Specifications

    Compatible DeviceiPhone 14 Pro Max (6.7″) — A2651, A2893, A2894, A2895, A2896
    Display TechnologyBQ7 Diagnosable Incell LCD (touch laminated into stack)
    Screen Size6.7 inches (diagonal)
    Resolution2796 × 1290 pixels
    Pixel Density460 PPI
    Refresh Rate120Hz support (vendor-confirmed for this batch)
    Touch TypeIncell — digitiser bonded into LCD stack
    BrightnessStandard backlit LCD output, daylight-readable
    Always-On DisplayNOT supported — must be disabled in Settings
    Auto-BrightnessRecommended OFF on aftermarket LCD
    Dynamic IslandNative cutout, full Live Activities support
    IC Chip TransferNOT required — no microsoldering
    Recognition MethodApple's built-in Diagnostics (Self-Service Repair flow) — no third-party programmer
    "Unknown Part" WarningCleared after Apple Diagnostics completes
    True TonePreserved after Apple Diagnostics completes
    Face IDFully functional (transfer original earpiece + TrueDepth flex)
    iOS CompatibilityiOS 17, iOS 18 and forward
    Earpiece / SensorsNOT included — transfer from original screen
    GradeBQ7 — top-tier aftermarket Incell LCD with diagnostic IC
    Warranty12-month replacement warranty (vendor-confirmed)

    🏆 Why Buy From JPC Mobile

    🔧

    Brisbane Technical Hub

    Operated by repair technicians out of Forest Lake, QLD. We test BQ7 batches before listing — if a batch fails our QC for 120Hz response, True Tone or panel uniformity, you never see it on the shelf.

    ✅

    Authenticity Guaranteed

    Genuine BQ7 Diagnosable Incell LCD — direct supply chain. Not standard non-diagnosable LCD relabelled as BQ7. Every assembly carries the BQ7 grade sticker.

    🚚

    Reliable Dispatch

    2–4 business days nationwide via Australia Post & courier. Held in Brisbane stock — no offshore drop-ship delays.

    👥 Who This Incell LCD Is Built For

    🛠️ Repair Shops

    Hit a competitive budget repair price-point on iPhone 14 Pro Max jobs. No JC programmer hire-out fee. No microsoldering bench time. Faster turnaround = more daily jobs.

    💰 Cost-Conscious Owners

    Cracked screen, OEM OLED quote too steep, want a working 120Hz display with True Tone and Dynamic Island at a much lower cost.

    🧰 Advanced DIY Repairers

    Standard pentalobe + suction kit gets the job done. No microsoldering rig required. Run Apple Diagnostics on the phone.

    💼 Resellers / Refurbishers

    Insurance and trade-in volume jobs where margin matters. No iOS warning preserves resale value. "Parts & Service History" stays clean.

    🔍 Replace Your Screen When You See

    💥 Cracked Glass

    Spider-web or shattered Ceramic Shield front — touch may still work but glass shards are a finger hazard.

    ⬛ Black Screen

    Phone vibrates and rings but display stays dark — original OLED panel has failed.

    📏 Vertical Lines

    Coloured stripes top-to-bottom — display driver IC has failed.

    🔥 OLED Burn-In

    Faint ghosted images of static UI — Dynamic Island, status bar or app icons left on too long. Incell LCD does not burn in.

    👆 Touch Not Responding

    Image fine but taps and swipes ignored — digitiser layer has failed.

    💧 Green Tint / Discolouration

    Patches of green or pink — internal OLED layer damaged from drop or pressure.

    🛠️ Install — 7 Steps (No Microsoldering)

    STEP 1

    Power Off & Remove Pentalobes

    Power off. Remove the two P2 pentalobe screws beside the Lightning port.

    STEP 2

    Heat & Open

    Soften the perimeter adhesive with a heat pad. Use a suction cup + opening pick to lift the screen carefully.

    STEP 3

    Disconnect Battery + Display

    Remove the metal cover plates. Disconnect battery first, then the display flex connectors.

    STEP 4

    Transfer Earpiece & TrueDepth

    Carefully transfer the earpiece speaker, proximity sensor and TrueDepth camera flex from the original screen to the new one.

    STEP 5

    Test, Then Run Apple Diagnostics

    Reconnect, power on. Test display, 120Hz scroll, touch, Face ID. Then run Apple's built-in Diagnostics from the Self-Service Repair flow to clear the warning + restore True Tone.

    STEP 6

    Disable AOD + Auto-Brightness

    Settings → Display & Brightness → Always On Display → OFF. Settings → Accessibility → Display & Text Size → Auto-Brightness → OFF. Mandatory for Incell LCD.

    STEP 7

    Apply Adhesive & Close

    Apply fresh waterproof adhesive strips. Press the screen home. Refit pentalobe screws. Done.

    ⚠️ TEST FIRST. Always verify the screen works before reapplying adhesive — installing then discovering a fault means re-opening the phone.

    🚚 Australia-Wide Shipping from Brisbane

    📍

    Brisbane Metro

    1–2 business days

    🏙️

    Sydney · Melbourne · Gold Coast

    2–3 business days

    🌏

    Adelaide · Perth · Hobart · Darwin

    3–5 business days

    Pay your way — Afterpay and Klarna available at checkout.

    ❓ Frequently Asked Questions

    Do I need a JC, JCID or iCopy programmer to install this? +

    No. No third-party programmer required at all. After installing the BQ7 Diagnosable Incell LCD you run Apple's own built-in Diagnostics — the Self-Service Repair flow Apple released with iOS 17. No JC V1SE, no JCID V1S Pro, no iCopy Plus.

    Do I need to transfer the original IC chip? +

    No microsoldering required. Skip the hot-air station, microscope and flux work that older aftermarket screens need. Run Apple's built-in Diagnostics on the new screen instead — the panel is verified directly by iOS.

    How do I clear the "Unable to verify display" warning? +

    Run Apple's built-in Diagnostics from the Self-Service Repair flow on the iPhone itself. Once the diagnostic completes, the warning under Settings → General → About → Parts & Service History clears and the panel is recognised as verified.

    Will True Tone work after I install it? +

    Yes — once Apple's built-in Diagnostics completes, True Tone stays active in Settings → Display & Brightness. We do recommend turning off Auto-Brightness on aftermarket Incell LCD to avoid overheating, but the True Tone toggle itself works.

    Does it support 120Hz like the OEM ProMotion display? +

    This BQ7 Incell LCD batch supports 120Hz operation — vendor-confirmed. Note that LCD cannot reproduce Apple's 1Hz Always-On Display floor, so AOD must be turned off after install. 120Hz scrolling and touch response is retained.

    Does Always-On Display work on this LCD? +

    No. LCD cannot run at the 1Hz refresh rate Apple's AOD requires. Always-On Display must be turned off in Settings → Display & Brightness after install. Leaving it on causes the backlight to stay on, which overheats the phone and drains the battery.

    Will Dynamic Island still work? +

    Yes — Dynamic Island works natively. The TrueDepth cutout matches OEM dimensions. Live Activities, music controls and incoming call animations render correctly.

    Will Face ID still work after the swap? +

    Yes — fully functional. Carefully transfer the earpiece speaker and TrueDepth camera flex from your original screen to the new one. Face ID hardware stays intact and continues authenticating.

    What's the difference between Incell LCD and OEM OLED? +

    OEM OLED is self-emissive with true blacks and supports Always-On Display at 1Hz. Incell LCD uses a backlight, so blacks render as dark grey and AOD is not supported. Incell LCD costs significantly less, retains 120Hz, True Tone and Dynamic Island, and never burns in.

    What does the 12-month warranty cover? +

    Manufacturing defects: dead pixels, panel failure, touch failure, backlight bleed, display driver fault. Excludes physical damage from drops, water or installation mistakes. Always test the LCD before applying adhesive — installation faults are not covered.

    Browse Related Categories
    iPhone Screen Protectors iPhone Cases Repair Tools
    🛡️

    The JPC Mobile Quality Seal

    Held in stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Tested by working repair technicians before listing. 12-month warranty on every BQ7 Diagnosable Incell LCD. Australia-wide shipping with tracking.

    🇦🇺
    Brisbane Stock
    ⚡
    2–4 Day Dispatch
    🛡️
    12-Month Warranty
    📞
    0480 039 913

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    BQ7 Diagnosable Incell LCD – iPhone 14 Pro Max – 120Hz, True Tone, No IC Chip Transfer Screen Replacement JPC MOBILE

    BQ7 Diagnosable Incell LCD – iPhone 14 Pro Max – 120Hz, True Tone, No IC Chip Transfer

    $157.80