Kinglas Camera Lens Protector for iPhone 17 Pro / Pro Max
Add a replaceable protective layer over the three rear camera lenses on an iPhone 17 Pro or iPhone 17 Pro Max. This Kinglas set uses clear tempered glass with an individual metal ring around each lens, allowing the separate flash and LiDAR areas on the camera plateau to remain uncovered when correctly fitted.
Select Black, Orange or Silver from the Color menu. The colour refers to the metal rings; the glass over each camera lens is clear. The listed price is for one three-lens protector set and one cleaner set. The iPhone and case are not included.
What is included
- 1 x Kinglas three-ring camera lens protector set on an application/removal tray
- 1 x cleaner set for preparing the camera area
Exact compatibility
Designed for the Apple iPhone 17 Pro and iPhone 17 Pro Max introduced in 2025. Apple identifies these models as:
-
iPhone 17 Pro: A3256, A3522, A3523 and A3524
-
iPhone 17 Pro Max: A3257, A3525, A3526 and A3527
The iPhone 17 Pro has a 6.3-inch display and the iPhone 17 Pro Max has a 6.9-inch display. Both use three rear cameras on an extended camera plateau, but the phones themselves have different dimensions. This protector is shaped for the shared three-lens layout described by the supplier.
It does not fit the standard iPhone 17, iPhone Air, iPhone 17e or earlier iPhone models. Check the model in Settings > General > About before opening or applying the protector.
Key product details
- Individual clear tempered-glass cover for each of the three rear camera lenses
- Metal ring around each protector in Black, Orange or Silver
- Supplier-rated 9H pencil hardness for resistance to everyday surface scratches
- Approximately 0.33 mm glass profile
- Supplier-advertised light transmission of at least 95%
- Hydrophobic and oleophobic surface treatment to help reduce water marks, fingerprints and oil
- Self-adhesive application with an alignment/removal tray
- Separate-ring layout intended to leave the True Tone flash and LiDAR scanner uncovered
Optical clarity and camera use
Kinglas advertises at least 95% light transmission through the clear glass. Any additional material over a camera lens can still affect reflections, flare, focus or low-light results if the protector is dirty, damaged, misaligned or lifting at an edge. Clean the protector before important photos and remove it if image quality changes.
The individual rings cover the three camera lenses rather than the whole camera plateau. Correct alignment is important: the separate flash and LiDAR scanner should remain open. Test the camera, flash, focus and video after installation before relying on the phone for an important recording.
What 9H means
The 9H rating is a supplier-stated pencil-hardness measurement for the protector surface. It does not make the glass unbreakable and is not a drop-height or impact certification. The protector is a sacrificial accessory intended to take ordinary scuffs and scratches before the phone's lens cover does. A severe impact can crack the protector, damage the camera or affect both.
Choose the ring colour
-
Black: dark metal-ring finish
-
Orange: warm orange metal-ring finish
-
Silver: bright silver metal-ring finish
The three colours provide the same supplier-stated specification. Product colour can look different under room lighting, camera exposure and screen settings.
Installation
- Remove the phone case and switch the iPhone off.
- Use the cleaner set to remove fingerprints, grease and dust from the camera lenses and surrounding rings.
- Allow the surface to dry completely and check it under bright light.
- Keep the protector on its tray and align all three rings with the camera lenses.
- Lower the tray straight down without sliding it across the camera plateau.
- Press each metal ring gently and evenly, then lift the tray away as directed by the packaging.
- Check that all three rings sit flat and that the flash and LiDAR areas are clear.
- Take test photos with and without flash before reinstalling the case.
Do not fit the protector over dust, moisture, an existing lens cover or damaged camera glass. If a ring is visibly misaligned, remove it carefully rather than forcing the phone case over it.
Case compatibility
The approximately 0.33 mm profile is intended to work with many cases, but camera cut-outs vary. A case with a very tight individual-lens opening or its own built-in camera cover may press against the metal rings. Test the case gently after fitting and stop if it lifts, bends or rubs the protector. Universal compatibility with every case is not guaranteed.
Care and removal
Wipe the protectors with a clean microfibre cloth. Avoid abrasive cleaners, sharp tools and excessive pressure. Replace a ring if it cracks, chips, lifts or becomes heavily scratched. For removal, take off the phone case, use the supplied tray or a thin plastic removal tool, and lift gradually from the metal edge. Do not lever against the camera glass with metal.
Protection limitations
No camera protector guarantees prevention of scratches, cracks, liquid damage or impact damage. Protection depends on the impact, installation, condition of the protector, phone case and surrounding environment. The product does not change the iPhone's water-resistance rating. Stop using any cracked protector because small glass fragments may be sharp.
Stock and fulfilment
Black, Orange and Silver were available from the Australian supplier when this page was checked. When a colour is not physically on the JPC shelf, an order may be fulfilled from available supplier stock. Availability can change before the supplier confirms an order.
Warranty and Australian Consumer Law
JPC Mobile - Tech Repair & Accessories does not provide an additional or voluntary product warranty on camera lens protectors. These are consumable, sacrificial accessories and wear, scratching, chipping or breakage during use is not itself covered by an additional JPC warranty.
This does not exclude, restrict or modify any consumer guarantee, right or remedy that cannot be excluded under the Australian Consumer Law. If the item arrives damaged, is not the colour ordered or does not match the stated compatible models, do not install it and contact us promptly with the order details and photographs.
Frequently asked questions
Does one pack cover all three rear lenses?
Yes. The supplied tray holds three individual protectors, one for each rear camera lens, plus a cleaner set.
Does it cover the flash or LiDAR scanner?
No when correctly aligned. The three individual rings are intended to cover only the camera lenses while leaving the separate flash and LiDAR areas open.
Will it fit both iPhone 17 Pro sizes?
The supplier lists the same set for iPhone 17 Pro and iPhone 17 Pro Max. It does not fit the standard iPhone 17 or other models.
Is 9H the same as drop-proof?
No. 9H is a pencil-hardness claim for surface scratch resistance, not a guarantee against drops or breakage.
Can I use it with a phone case?
It works with many cases, but very tight camera cut-outs and cases with built-in lens covers may interfere. Test the fit without forcing the case.
