OEM-Compatible Fit

Designed specifically for Xbox Series S HDMI port replacement with precise dimensions matching original Microsoft specifications for perfect fit and function.

A-Grade Materials

Built from high-quality A-grade components for strong, stable HDMI connections. Delivers reliable 4K@120Hz video output and long-lasting performance.

Restores Full Video Output

Fixes common Xbox Series S HDMI issues: no signal/black screen, flickering display, distorted graphics, intermittent connection, or loose port.

Professional Installation Required

Micro-soldering expertise required for proper installation. 19 delicate signal pins plus mounting pins demand professional-grade equipment and skills.

Fully Tested

Every HDMI port connector undergoes rigorous pre-testing for quality assurance and performance before dispatch to ensure optimal fit and function.

Will this HDMI port fix my Xbox Series S "No Signal" issue?

If your Xbox Series S has a damaged HDMI port, yes - this replacement part will fix no signal and display problems. However, not all "No Signal" issues are caused by the port. Before ordering, try these troubleshooting steps: Test with a different HDMI cable (could be cable damage), try a different TV/monitor and different HDMI input port, power cycle the console (unplug for 10+ seconds), check for system updates in Settings > System > Updates, clean the port with compressed air. If problems persist with multiple cables/TVs, the HDMI port is likely damaged and needs replacement. Common causes of port damage: cable pulled at an angle, console dropped or impacted, frequent plugging/unplugging, manufacturing defect (known issue on Series S).

Can I install this HDMI port myself or do I need professional help?

Professional installation is STRONGLY RECOMMENDED. Xbox Series S HDMI port replacement is one of the most difficult gaming console repairs requiring advanced micro-soldering skills. The process involves: complete console disassembly (Torx T6/T8 screwdrivers), motherboard removal from all components, desoldering the old 19-pin HDMI port using hot air rework station at precise temperature (350-380°C), cleaning residual solder and flux, aligning new port under microscope (pins are 0.4mm pitch - extremely small), soldering each pin individually without bridging connections, testing all 19 pins for continuity, reassembly and functionality testing. Without proper equipment and experience, you WILL damage the motherboard - lifting pads/traces is extremely common and makes the repair more expensive or impossible. DIY also voids any remaining Microsoft warranty. JPC Mobile Brisbane offers professional Xbox Series S HDMI repair service - call 0480 039 913 for pricing.

Is this HDMI port compatible with Xbox Series X or Xbox One?

NO - this port is ONLY compatible with Xbox Series S. HDMI ports are NOT interchangeable between Xbox models. Each console uses a different port design with unique dimensions, pin configuration, and mounting points. Using the wrong port will not fit and can damage your console motherboard. Make sure you have: Xbox Series S (the smaller, digital-only white console with no disc drive) - this port is compatible. This port will NOT work with: Xbox Series X (the larger tower console with disc drive), Xbox One (original 2013 model), Xbox One S (slim 2016 model with disc drive), Xbox One X (premium 4K model). If you need HDMI ports for other Xbox models, search our catalog for the correct model-specific replacement part.

What tools do I need to replace Xbox Series S HDMI port?

HDMI port replacement requires professional-grade equipment: Micro-soldering tools: Soldering iron with fine tip (0.2-0.3mm), hot air rework station with temperature control (350-380°C), solder wire (0.3-0.5mm), flux (tacky flux recommended), desoldering pump or solder wick, Disassembly tools: Torx T6 and T8 screwdrivers, plastic spudgers and prying tools, anti-static tweezers, Precision equipment: Microscope or magnifying lamp (20-40x magnification minimum for 0.4mm pin pitch), multimeter for continuity testing, Safety: ESD-safe mat and wrist strap, heat-resistant mat, isopropyl alcohol (99%) and lint-free cloth for cleaning. Total tool investment typically exceeds $400-800 AUD for quality equipment. For one-time repair, professional installation ($90-130 AUD) is far more cost-effective than buying all tools.

How long does professional HDMI port replacement take?

Professional Xbox Series S HDMI port replacement typically takes 2-4 hours when performed by experienced micro-soldering technicians. Breakdown: diagnostic testing to confirm HDMI port failure (15-30 min), complete console disassembly and component removal (30-45 min), micro-soldering removal of damaged port and installation of new port (90-120 min - most critical and time-consuming step), continuity testing with multimeter to verify all 19 pins (15-30 min), reassembly and functionality testing for video output, audio, all resolutions (20-30 min). Many repair shops offer same-day or 1-2 day turnaround depending on workload. Rushed repairs increase risk of damage - allow proper time for quality work. JPC Mobile Brisbane provides Xbox Series S HDMI repair service - call 0480 039 913 for current wait times and booking availability.

Does this port support 4K and 120Hz gaming?

Yes! This OEM-compatible HDMI port fully supports all Xbox Series S video output capabilities including: 4K upscaling at 120Hz (games rendered at lower resolution upscaled to 4K), 1440p at 120Hz (native output for many Series S optimized games), 1080p at 120Hz for competitive multiplayer gaming with ultra-smooth frame rates, Variable Refresh Rate (VRR) to eliminate screen tearing and stuttering, Auto Low Latency Mode (ALLM) for reduced input lag, HDR10 support for enhanced color and contrast. The port uses HDMI 2.1 specification delivering full bandwidth for Xbox Series S features. After professional installation, your console will output video identically to factory specifications - crisp 4K visuals and lag-free 120fps gaming performance restored.

What causes Xbox Series S HDMI port damage?

Common causes of HDMI port failure on Xbox Series S: Physical stress: cable pulled at an angle, yanked out forcefully, or weight/pressure on connected cable, Impact damage: console dropped, knocked off shelf, or hit while cable connected, Repeated plugging/unplugging: frequent connection/disconnection wears out contacts and loosens solder joints, Poor cable quality: stiff or oversized HDMI plugs putting stress on port, Manufacturing defect: Xbox Series S HDMI port is a known weak point - many users report failures within 1-2 years even with careful use, Overheating: console overheating can weaken solder joints over time, Electrical surge: lightning strikes or power surges through HDMI can damage port electronics. Prevention tips: use short, flexible HDMI cables, insert/remove cable straight (no angles), use HDMI extension adapter to reduce main port wear, don't move console with cable attached, use surge protector.

Will installing this part void my Xbox Series S warranty?

Yes - opening your Xbox Series S console voids the Microsoft warranty. Xbox consoles have warranty stickers and tamper-evident seals that break when opened. If your Series S is still under the standard 1-year Microsoft warranty (or extended warranty through retailer), DO NOT attempt DIY repair - contact Microsoft Support first. They may offer free or discounted repair/replacement for manufacturing defects including known HDMI port issues. However, if warranty has expired or HDMI damage was caused by physical abuse/accident (not covered), then replacement is your only option. Professional repair shops can install the port without voiding... well, the warranty is already void by opening it. Important: Most third-party repair shops (including JPC Mobile) offer their own warranty on parts and labor (typically 3-6 months) even though Microsoft warranty is voided.

How long does shipping take to Brisbane and other Australian cities?

We ship from our Brisbane warehouse within 2-4 business days of order placement. Delivery times vary by location: Brisbane metro (1-2 business days after dispatch), Gold Coast/Sunshine Coast (2-3 days), Sydney/Melbourne (3-5 days), other capital cities (4-6 days), regional areas (5-8 days). All HDMI ports are shipped in anti-static packaging with secure bubble wrap protection to prevent damage during transit. Australia Post tracking number provided via email once dispatched. For immediate needs or professional installation service, visit our Forest Lake store for same-day parts pickup or book Xbox Series S HDMI repair service. We're located at Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078 - call 0480 039 913 to confirm HDMI port stock availability and installation appointment times.

2-4 Day Dispatch

Ships within 2-4 business days from Brisbane warehouse to all Australian locations with secure anti-static packaging

Professional Xbox Repair

Visit Shop 3a, 152 Woogaroo St, Forest Lake for expert micro-soldering HDMI port replacement service

Local Tech Support

Brisbane-based team ready to help with compatibility and repair questions: 0480 039 913

Gaming Console Experts

Specialist repairs for Xbox Series S/X, PlayStation 5, Nintendo Switch with OEM-compatible parts

Xbox Repair Tool Kits

Torx screwdrivers, spudgers, and opening tools for Xbox console repairs

HDMI Cables

High-speed HDMI 2.1 cables for 4K@120Hz gaming performance

Xbox Controller Parts

Replacement buttons, thumbsticks, and controller accessories