• Send Us a Message
    • Ir a contenido
    Xbox Elite Series 2 Controller Analog Joystick Module Model 1797 ALPS-Style Stick Drift Repair Buttons JPC MOBILE ACCESSORIES

    Xbox Elite Series 2 Controller Analog Joystick Module Model 1797 ALPS-Style Stick Drift Repair

    $0.00 - $0.00
    $0.00
    $7.37
    $7.37 - $7.37
    $7.37
    SKU Joystick-XOneES2
    OEM-Equivalent ALPS-Style Module · Bench Inspected

    3D Analog Joystick Module for Xbox Elite Series 2 Model 1797

    Internal 3D analog joystick module for the Xbox Elite Series 2 controller. It fits Model 1797 only. The Elite Series 2 uses its own stick design. Standard Xbox One and Series X sticks are different. This module fixes stick drift at the source. It also fixes creeping, dead zones and off-centre sticks. It uses ALPS-style potentiometer sensors with a threaded stem. One module suits the left or right stick position. The outer thumbstick cap is not included. Your magnetic Elite caps clip straight back on. Soldering is required to fit this part. Recalibrate in the Xbox Accessories app after install.

    Fits Model 1797
    ALPS-Style Potentiometers
    Threaded Stem
    Left Or Right Stick
    Solder-In Fit
    Fixes Stick Drift
    Dispatched From Forest Lake QLD
    Ships 2-4 Days AU

    Signs Your Joystick Module Has Failed

    These faults trace back to worn potentiometer tracks inside the stick.

    Stick Drift

    Your aim or character moves with no input.

    Creeping Camera

    The view slowly slides in one direction.

    Dead Zones

    The stick ignores small movements near centre.

    Won't Centre

    The stick rests off-centre after you let go.

    Loose Or Wobbly Stick

    The stick feels sloppy with worn-out spring return.

    No Stick Click

    Pressing the stick no longer registers L3 or R3.

    Brisbane Technical Hub

    Based in Forest Lake, Brisbane. Real technicians who repair Xbox controllers on the bench.

    Authenticity Guaranteed

    OEM-equivalent modules from verified suppliers. Bench inspected before dispatch. No junk clones.

    Reliable Dispatch

    Ships in 2-4 business days. Sent from Forest Lake QLD. Tracked Australia-wide.

    Confirm The Fault Install Notes Tools Specs Compatibility FAQs

    Confirm It Is The Module Before You Solder

    Run these checks first. Some drift cases need no new part.

    • Update the controller firmware in the Xbox Accessories app.
    • Check the stick input on the app's test screen.
    • Adjust the dead zone settings and retest the stick.
    • Clean around the stick base with isopropyl alcohol.
    • Dust and debris cause many early drift cases.
    • Drift on both profiles points to a hardware fault.
    • Persistent drift after cleaning means worn potentiometer tracks.
    • Only the drifting stick needs a new module.

    Install Notes — Read Before You Start

    • This is a solder-in part, not a plug-in part.
    • Desolder all module pins cleanly before lifting it out.
    • Forcing the old module can rip the copper pads.
    • Torn pads usually make the board unrepairable.
    • Use an anti-static mat and strap at all times.
    • The rear grips hide the T8 security Torx screws.
    • The outer thumbstick cap is not included here.
    • Your magnetic Elite caps snap onto the threaded stem.
    • Recalibrate the stick in the Xbox Accessories app after fitting.

    Difficulty: advanced. Confident soldering skills are essential. Not comfortable soldering? Our Forest Lake team can fit it in-store.

    Tools Needed

    Soldering Iron + Solder

    A temperature-controlled iron gives the cleanest joints.

    Desoldering Wick Or Pump

    Clears the old solder from every module pin.

    T6 Torx Screwdriver

    Opens the internal board screws.

    T8 Security Torx

    Removes the hidden case screws under the grips.

    Plastic Prying Tools

    Open the shell without marking the housing.

    Anti-Static Mat

    Protects the board from static damage.

    Full Specifications

    Product Type
    3D Analog Joystick Module
    Fits Controller
    Xbox Elite Series 2
    Controller Model
    Model 1797
    Sensor Type
    Dual Potentiometers
    Design Standard
    ALPS-Style OEM-Equivalent
    Stem Type
    Threaded Stem
    Cap Included
    No — Reuse Magnetic Caps
    Stick Position
    Left Or Right
    Stick Click
    L3 / R3 Button Built In
    Faults Fixed
    Drift / Creep / Dead Zones
    Also Fixes
    Off-Centre / No Click / Loose
    Install Method
    Solder-In (Desolder Old Unit)
    Difficulty
    Advanced
    Screws Used
    T6 + T8 Security Torx
    Calibration
    Xbox Accessories App
    Package Contents
    1x Joystick Module Only
    Tools Included
    None — See Tools List
    Quality Check
    Bench Inspected
    DOA Cover
    7-Day DOA Replacement
    Dispatch
    Forest Lake QLD

    Compatibility

    Fits This Controller

    Check the model number printed on the back of your controller.

    Xbox Elite Series 2 (Model 1797) Left Stick Position Right Stick Position

    Does NOT Fit

    • Standard Xbox One controllers — they use a different stick design.
    • Xbox Series X and Series S controllers — different module.
    • Xbox Elite Series 1 (Model 1698) — different generation.
    • PlayStation DualShock and DualSense controllers.
    • Nintendo Switch Joy-Con and Pro controllers.

    Own a different controller? Browse our other analog stick listings instead.

    This OEM-Equivalent Module

    • ALPS-style potentiometers match the original feel.
    • Correct pin layout for the Elite Series 2 board.
    • Threaded stem takes your magnetic Elite caps.
    • Bench inspected before it ships to you.
    • Centres true after calibration.

    Cheap Clone Module

    • Loose sensor tolerance drifts again within weeks.
    • Wrong stem height throws off the cap fit.
    • Spring tension feels mushy or too stiff.
    • Off-centre resting position from day one.
    • No inspection, no support, no comeback.

    Visit Us In-Store

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Brisbane Technical Hub

    Not keen on soldering? We can fit it for you.

    Authenticity Guaranteed

    Genuine product from verified suppliers.

    Reliable Dispatch

    Sent from Forest Lake in 2-4 days.

    Shipping & Delivery

    • Dispatch: within 2-4 business days from Forest Lake QLD.
    • Brisbane Metro: usually 1-3 days after dispatch.
    • Sydney and Melbourne: usually 2-4 days after dispatch.
    • Perth and regional: usually 4-7 days after dispatch.
    • Tracking: sent by email once your order ships.
    • Pickup: collect free from our Forest Lake shop.

    Pay your way — Afterpay and Klarna available at checkout.

    Frequently Asked Questions

    +What causes stick drift on the Elite Series 2?

    The stick reads position through potentiometer tracks. Those tracks wear down with heavy use. Dust and debris make it worse. A worn module drifts even after cleaning.

    +Does this fit standard Xbox One or Series X controllers?

    No. The Elite Series 2 uses its own stick design. Standard Xbox One and Series X sticks are different parts. Check for Model 1797 on the back of your controller.

    +Is the thumbstick cap included?

    No. This is the internal module only. It has a threaded stem on top. Your existing magnetic Elite caps snap straight back on.

    +Can I replace just one stick?

    Yes. Each stick position uses its own module. Replace only the stick that drifts. Order two modules if both sticks have failed.

    +How hard is this repair?

    This is an advanced repair. It needs clean desoldering across all module pins. Torn copper pads can ruin the board. Beginners should practise on scrap boards first.

    +Can JPC fit this for me in-store?

    Yes. Bring your controller to our Forest Lake shop. Our technicians solder controller sticks on the bench daily. Find us at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

    +Do I need to calibrate after installing?

    Yes, we recommend it. Open the Xbox Accessories app on console or PC. Run the recalibrate option for the stick. Then check your dead zone settings.

    +Should I try cleaning before replacing the module?

    Yes. Debris causes many early drift cases. Clean around the stick base with isopropyl alcohol. Replace the module if drift returns after cleaning.

    +Is this a genuine Microsoft part?

    No. Microsoft does not sell this module separately. It is an OEM-equivalent ALPS-style part. It matches the original pin layout and sensor design.

    +Is there a warranty on this module?

    Solder-in components carry 7-day DOA cover only. Every module is bench inspected before dispatch. Damage from installation or soldering is not covered.

    Browse Related Categories

    Xbox Replacement Parts Repair Tools & Kits Browse All Products

    Pay your way — Afterpay and Klarna available at checkout.

    JPC Mobile Quality Seal

    Trusted Australian Console Repair Parts

    We supply Xbox controller repair parts across Australia. Visit us at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

    Verified Suppliers
    Bench Inspected
    Dispatched From Forest Lake QLD

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    Xbox Elite Series 2 Controller Analog Joystick Module Model 1797 ALPS-Style Stick Drift Repair Buttons JPC MOBILE ACCESSORIES

    Xbox Elite Series 2 Controller Analog Joystick Module Model 1797 ALPS-Style Stick Drift Repair

    $7.37