• Send Us a Message
    • Ir a contenido
    Nintendo Switch OLED Joy-Con Sensor Rail Set Left Right Flex Cable HEG-001 11-Pin ZIF Pull-A Screen Replacement JPC MOBILE

    Nintendo Switch OLED Joy-Con Sensor Rail Set Left Right Flex Cable HEG-001 11-Pin ZIF Pull-A

    $0.00 - $0.00
    $0.00
    $24.50
    $24.50 - $24.50
    $24.50
    SKU Pull-LRSlider-SwitchOLED
    Pull-A Genuine Console Part · 11-Pin Tested

    Nintendo Switch OLED Joy-Con Sensor Rail Set — Left & Right Slide Rails With Flex Cable (HEG-001)

    This is a genuine Pull-A Joy-Con sensor rail set. It fits the Nintendo Switch OLED model HEG-001 only. The kit includes one left rail and one right rail. The left rail uses the long flex cable. The right rail uses the short flex cable. Each rail ends in an 11-pin ZIF connector. The rails carry Joy-Con sync, charging and button data. They are recovered from working donor HEG-001 consoles. Every rail is tested across all 11 contact pins. The rails screw into the frame with no soldering. It does not fit the standard Switch or Switch Lite.

    Pull-A Genuine 11-Pin ZIF Connector Left Long + Right Short Joy-Con Sync + Charge HEG-001 Only
    11-Pin Tested Screw-In No Solder Ships 2-4 Days AU

    Is Your Switch OLED Showing These Signs?

    These are the faults a worn sensor rail causes.

    Joy-Con not detected when attached
    Joy-Con will not charge while docked
    Connection drops out mid-game
    Loose or wobbly rail when attaching
    Buttons not registering on the Joy-Con
    Bent or corroded contact pins on the rail

    This left and right rail set is the direct fix for these faults.

    Brisbane Technical Hub

    Dispatched from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Real local repair support.

    Authenticity Guaranteed

    Each rail is recovered from a working HEG-001 console. Real Nintendo hardware, never clone parts.

    Reliable Dispatch

    Ships in 2-4 business days from Forest Lake via tracked post. Packed anti-static for transit.

    Why Pull-A Triage Install Tools Specs Compatibility FAQs

    What Pull-A Grade Means

    Genuine parts recovered from working consoles, then tested.

    Recovered From Working Hardware

    Pulled from functional HEG-001 consoles, not aftermarket copies.

    Graded Before Listing

    No bent pins, no cracked tracks, no damaged ribbon folds.

    11-Pin Continuity Tested

    Sync, charge and button data must all pass first.

    Pre-Owned, 7-Day DOA

    Pull-A parts carry a 7-day dead-on-arrival cover only.

    Confirm The Rail Is The Fault First

    Run these checks before you swap the rail.

    • Test the same Joy-Con on the other side of the console.
    • If it works on one side only, the rail is suspect.
    • Try a second Joy-Con on the faulty side.
    • If both fail on one side, the rail likely failed.
    • Check the rail pins for bends, dirt or green corrosion.
    • Reseat the Joy-Con firmly and test the connection again.
    • Update the console software to rule out a glitch.
    • If charging and sync still fail, replace that rail.

    Install Notes — Read Before You Start

    This job needs care but no soldering.

    • Power the console down fully before you open it.
    • The rear case uses Y00 tri-point screws.
    • Internal rail screws are tiny and strip easily.
    • Use a JIS000 bit on the rail screws.
    • Lift the ZIF flap gently before pulling the ribbon.
    • Do not swap the left and right cables.
    • The long cable is left, the short cable is right.
    • Work on an anti-static mat to protect the board.

    Difficulty: moderate. Allow 30 to 60 minutes.

    Tools You Will Need

    Y00 Tri-Point (Y1.5)

    Opens the rear case screws.

    JIS000 Screwdriver

    Best fit for the small rail screws.

    PH000 Phillips (Backup)

    Works in a pinch on rail screws.

    Plastic Opening Picks

    Release the case clips without cracking it.

    Nylon Spudger

    Disconnects the ZIF ribbon safely.

    ESD Tweezers + Screw Mat

    Handle the ribbon and track tiny screws.

    Full Specifications

    Part Type
    Joy-Con Sensor Rail / Slide Rail
    Console Model
    Nintendo Switch OLED HEG-001
    Connector
    ZIF FPC Flex Cable
    Pin Count
    11-Pin
    Left Rail Cable
    Long Flex Cable
    Right Rail Cable
    Short Flex Cable
    Functions
    Sync / Charge / Button Data
    Grade
    Pull-A
    Source
    Working Donor HEG-001
    Install Method
    Screw-In Mount
    Soldering
    Not Required
    Case Screws
    Y00 Tri-Point
    Rail Screws
    JIS000 / PH000
    Difficulty
    Moderate
    Estimated Time
    30 to 60 Minutes
    In The Box
    1x Left + 1x Right Rail
    Tested
    11-Pin Continuity
    Condition
    Tested Working
    DOA Cover
    7-Day Replacement
    Packaging
    Anti-Static Bag + Foam
    Quality Check
    Bench Inspected
    Dispatched From
    Forest Lake QLD

    Compatibility — Nintendo Switch OLED

    Fits This Console

    Switch OLED HEG-001 All Regions (AU/US/EU/JP) White & Neon All OLED Batches

    These rails match the HEG-001 chassis and motherboard layout.

    Does NOT Fit These Models

    • Nintendo Switch 2017 — model HAC-001.
    • Nintendo Switch V2 2019 — model HAC-001(-01).
    • Nintendo Switch Lite — model HDH-001.
    • The Joy-Con controller slider — a different part.

    Check the model number on the back of your console first.

    Genuine Pull-A Rail vs A Cheap Clone Rail

    Genuine Pull-A Rail

    Tested And Reliable

    • Real Nintendo metal contacts that last.
    • Tested across all 11 ZIF pins.
    • Correct left long and right short cable.
    • Reliable Joy-Con sync and charging.
    Cheap Clone Rail

    Fails Fast

    • Soft metal contacts that wear quickly.
    • Often shipped with no testing at all.
    • Wrong cable length that bunches up.
    • Drops sync and charge after weeks.

    Visit Us In Forest Lake, Brisbane

    Prefer a pro to fit it? Our bench team can help.

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Brisbane Technical Hub
    Authenticity Guaranteed
    Reliable Dispatch

    Shipping & Delivery

    • Dispatch: 2-4 business days from Forest Lake QLD.
    • Brisbane Metro: usually 1-3 business days after dispatch.
    • Sydney and Melbourne: usually 3-5 business days after dispatch.
    • Perth and regional areas: usually 5-7 business days after dispatch.
    • Tracking: a tracked number is emailed on dispatch.
    • Pickup: collect in store at Shop 3A, Forest Lake QLD.

    Pay your way — Afterpay and Klarna available at checkout.

    Frequently Asked Questions

    +Why do Switch OLED rails fail?

    The 11 thin pins wear from sliding Joy-Cons daily.

    Drops, dust and liquid can also damage the ribbon.

    +Are the left and right rails the same?

    No. The left rail has the long flex cable.

    The right rail has the short flex cable.

    +Will this fit my standard Switch?

    No. It only fits the Switch OLED, model HEG-001.

    It does not fit the standard Switch or the Lite.

    +Does this repair need soldering?

    No soldering is needed at any step.

    The rails screw in and the ZIF cable locks down.

    +What tools do I need?

    A Y00 tri-point opens the case screws.

    A JIS000 suits the small internal rail screws.

    +How hard is this repair?

    It is rated moderate, taking 30 to 60 minutes.

    The main risks are stripped screws and a torn ribbon.

    +Is there a warranty on this part?

    Pull-A parts carry a 7-day dead-on-arrival cover only.

    Each rail is tested across all 11 pins first.

    +How long does delivery take?

    Orders are dispatched within 2-4 business days.

    Most parcels then arrive within 2 to 7 business days.

    +Can I replace just one rail?

    Yes. Replace only the side that has the fault.

    Most techs replace both, as wear is usually even.

    +Do I need to match the cables to each side?

    Yes. The long cable goes on the left side.

    The short cable goes on the right side.

    Browse More Switch Repair Parts

    Switch OLED Parts All Switch Parts

    Pay your way — Afterpay and Klarna available at checkout.

    Pull-A Genuine Console Part · 11-Pin Tested

    The JPC Mobile Quality Seal

    Every rail is bench tested and packed anti-static by our Brisbane team. Order online or visit us in store.

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Genuine Pull-A Parts 11-Pin Continuity Tested Dispatched From Forest Lake QLD

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    Nintendo Switch OLED Joy-Con Sensor Rail Set Left Right Flex Cable HEG-001 11-Pin ZIF Pull-A Screen Replacement JPC MOBILE

    Nintendo Switch OLED Joy-Con Sensor Rail Set Left Right Flex Cable HEG-001 11-Pin ZIF Pull-A

    $24.50