Yes — it fits all five models with no compromise in fit or coverage. All five iPads share identical body dimensions: 250.6 × 174.1 mm. The 10.2" and 10.5" numbers describe the screen diagonal only. The device footprint is exactly the same across all five models. Cutouts for the front camera and home button align correctly on every model. The 2.5D curved edges sit flush with the bezel on all five devices. One precision-cut protector — five perfect fits.

CSG stands for China Southern Glass — a leading specialist glass manufacturer. The aluminium refers to the aluminium-silicate reinforcement process used during tempering. Smaller sodium ions in the glass are replaced with larger potassium ions during production. This creates surface compression that dramatically increases hardness. The result is glass roughly three times stronger than standard tempered glass. This is what earns the 9H hardness and "triple strength" rating. It also improves thermal stability and optical clarity compared to cheaper glass types.

The test presses an abrasive pad against the glass surface 3000 times. It simulates real-world wear from fingers, stylus, and everyday contact. A protector that passes keeps its coating and clarity intact after 3000 cycles. Budget coatings often wear off after just a few hundred friction cycles. This test specifically validates the AF Plasma anti-fingerprint coating's long-term durability. The surface stays smooth and fingerprint-repellent far longer than cheap alternatives. It is especially important for iPads used by children or in school environments.

AF stands for Anti-Fingerprint. Plasma describes how the coating is applied. The coating material is vaporized and ionized inside a vacuum chamber. It bonds to the glass at the molecular level — not on top of it. This makes it far more durable than spray-on or dip-applied coatings. Regular oleophobic coatings sit on the surface and wear away in patches. Plasma coating stays consistent and even across the whole screen. This gives fingerprint repellency that lasts the life of the protector. It does not fade away in the first few months like cheaper coatings.

Yes. All five compatible iPad models support Apple Pencil (1st Generation). The 0.33mm glass keeps the Pencil's sensors accurate and responsive. Pressure sensitivity, tilt recognition, and palm rejection all work normally. Many users prefer drawing on tempered glass to bare screen. It offers a natural slight resistance — similar to writing on quality paper. The 92% transparency keeps display colours accurate for creative work. The AF Plasma surface also stays clean during long drawing or note-taking sessions.

Anti-explosion means the glass breaks safely if it takes severe impact. It does not shatter into sharp flying pieces like regular glass. Broken fragments stay bonded to the adhesive layer underneath. This prevents cuts to your fingers during continued use or during removal. A cracked protector often still protects the iPad screen underneath. The same safety principle is used in car side windows and safety glass panels. It is especially important for iPads used by children at school or at home.

All five compatible iPads share the same physical body size: 250.6 × 174.1 mm. This is a confirmed spec across all five models. The 10.2" and 10.5" screen sizes refer only to the diagonal measurement of the display. The actual device is the same size in your hands. The home button position and front camera cutout also align across all five models. This is intentional cross-compatibility — not a workaround. One cut, engineered to fit all five, with no gaps or overhang on any model.

Choose a clean, low-dust space — a bathroom after a hot shower works well. Wash and dry your hands to remove oils before you start. Use the included alcohol swab to clean the iPad screen thoroughly. Dry it with the microfiber cloth until streak-free. Inspect the surface under good light. Use the dust tape to lift any remaining particles. Peel the adhesive film from the protector — hold only the edges. Align it with the home button and top edge first, then lower gently. Press from the centre outward using a card wrapped in the microfiber cloth. Small bubbles that remain will disappear within 24–48 hours as the adhesive settles.

Yes. The total added thickness is only 0.6mm — glass plus adhesive combined. This is barely noticeable and will not interfere with most cases. Smart Covers, folio cases, rugged shells, and keyboard covers all work fine. The 2.5D edges prevent raised case lips from catching and lifting the protector. Magnetic sleep/wake cases continue to function normally with the protector fitted. For very thick rugged cases with a large raised front lip, fit the case first. Then apply the protector while it is inside the case to get perfect alignment.

Orders dispatch within 2–4 business days from our Forest Lake store. Address: Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078. Brisbane metro customers typically receive delivery 1–2 business days after dispatch. Regional QLD (Gold Coast, Sunshine Coast, Toowoomba) takes around 2–4 days after dispatch. Interstate orders to Sydney, Melbourne, and Adelaide generally arrive in 3–5 business days. All orders include a tracked Australia Post tracking number sent by email. Call us on 0480 039 913 with any urgent order enquiries before placing your order.