Samsung Galaxy A52s 5G A528B Charging Port Sub-Board Flex (K2 Revision) — PULL-A USB-C, Microphone & Antenna Fix
Genuine PULL-A charging port sub-board pulled from working Samsung A528B donor devices. K2 revision — the later global production standard. Locked fitment to Samsung Galaxy A52s 5G model SM-A528B only. USB Type-C 2.0 port with one MEMS microphone fitted on the daughter board. Includes the antenna spring contacts and the high-density FPC connector. Each board is vendor-tested for fast charging speed and microphone clarity. Functional 10 of 10 with cosmetic grade 9 of 10 minimum. Backed by a 12-month replacement warranty on the sub-board itself. Dispatched from Forest Lake QLD within 2-4 business days.
Symptoms This Board Fixes On Your A52s 5G
Phone Won't Charge At All
Cable is plugged in but no charge icon shows up on screen.
Charging Port Feels Loose
USB-C plug wobbles or only charges at one specific angle.
Microphone Stopped Working
Callers cannot hear you on phone calls or voice memos.
Slow Charging Or Trickle Only
Phone takes hours to charge or never reaches 100 percent.
Moisture Detected Warning
Moisture alert keeps blocking charging even after the port dries.
Charging Cuts In And Out
Battery icon flips between charging and not charging non-stop.
12-Month Replacement Warranty
Vendor-confirmed 12-month warranty on the sub-board against any factory defect.
Brisbane Technical Hub
Forest Lake repair workshop. Trade enquiries welcome in store.
Authenticity Guaranteed
Genuine Samsung donor pulls — never aftermarket clones.
Reliable Dispatch
Standard 2-4 business-day shipping AU-wide. Tracking on every order.
Jump To
Why PULL-A Beats Aftermarket Copy Boards
PULL-A is genuine Samsung silicon — not a copy of the original board.
Genuine Samsung Silicon
Pulled from real working A528B donor devices, not factory-cloned.
Full Charging IC Protection
Original Samsung charging logic — copies cut these protective ICs.
Vendor Bench-Tested
Each board tested for fast-charge speed and microphone clarity.
Functional 10/10 · Cosmetic 9/10
No oxidation on the port and no bent FPC connector pins.
Confirm It's The Sub-Board, Not The Battery
Run this 8-step check before swapping the board.
- Try a known-good USB-C cable from a different brand and source.
- Try a known-good 25W charger or PD wall plug.
- Clean the port with a wooden toothpick — lint causes 30% of faults.
- Boot into Samsung diagnostics — dial *#0*# and tap "Sensor".
- Test the microphone in voice recorder before assuming a board fault.
- Check for a swollen battery pushing the back glass up off the frame.
- Look for a "Moisture detected" alert that keeps coming back.
- Check the board silkscreen — it must say "K2" near the FPC connector.
Install Notes — Read Before You Open The Phone
Difficulty: intermediate. Plan 30-45 minutes for a clean swap.
- Disconnect the battery first — always before any other connector.
- The back glass is glued — heat to 60°C before suction-cup removal.
- Use a fresh adhesive ring on the back glass after the repair.
- Do not over-bend the FPC tail — it will tear at the bend point.
- Use ESD protection — the charging IC is static-sensitive.
- Re-seat the antenna spring contacts evenly across all four points.
- Power on with the battery only first — confirm boot before sealing.
- Test charging speed and microphone before re-fitting back glass.
- Refit the SIM tray — the SIM reader is on a separate flex cable.
- Apply fresh waterproof adhesive to restore the IP67 dust seal.
Tools You'll Need For The Swap
Phillips PH00 Driver
For all internal screws holding the mid-frame in place.
Heat Pad Or Hair Dryer
Soften the back glass adhesive at around 60°C.
Suction Cup + Plastic Pick
For lifting and slicing the back glass adhesive ring.
Plastic Spudger
For prying the FPC connector and antenna contacts.
Anti-Static ESD Mat
Protects the charging IC from static damage on the bench.
Replacement Back Glass Adhesive
A pre-cut adhesive ring restores the IP67 dust seal.
Full Specifications
Brand
Samsung donor pull
Part Type
Charging Port Sub-Board
Trade Synonyms
Sub board / Daughter board / Charging flex
Grade
PULL-A — genuine donor pull
Board Revision
K2 — later global standard
Compatibility
Samsung Galaxy A52s 5G only
Model Number
SM-A528B (Global / AU / EU)
Connector Type
USB Type-C 2.0
Microphone
1 × MEMS primary mic on board
Antenna Contacts
4-6 spring contact points
FPC Connector
High-density board-to-mainboard
SIM Reader
Not on this board (separate flex)
Fast Charge Support
25W Samsung Super-Fast Charging
Functional Test
Charge speed + mic clarity verified
Cosmetic Grade
9/10 minimum — no oxidation
FPC Pin Health
10/10 — no bent or missing pins
Charging IC
Genuine Samsung — full protection
Vendor SKU
Pull-CportK2-A528
Warranty
12-month replacement warranty
Install Difficulty
Intermediate — 30-45 minute job
Dispatch
2-4 business days from Forest Lake
Fitment — What This Board Fits
Fits This Model And Revision Only
Does NOT Fit These Models Or Revisions
- Samsung Galaxy A52s 5G K1 revision — different FPC pinout
- Samsung Galaxy A52 4G (SM-A525F) — different board layout
- Samsung Galaxy A52 5G (SM-A526B) — different board layout
- Samsung Galaxy A72 (SM-A725F) — physically larger board shape
- Samsung Galaxy A72 5G (SM-A726B) — different board pinout
- Samsung Galaxy M52 5G (SM-M526B) — different sub-structure
- Samsung A528N (Korea) — different antenna tuner frequencies
- Samsung A528E (India) — different antenna tuner frequencies
- Samsung A528U (USA carrier) — different antenna tuner frequencies
- K1 mismatch causes "no service" or dead microphone faults
Genuine PULL-A vs Cheap Aftermarket Copy
Side-by-side. Why genuine PULL-A is the safer swap for the A52s 5G.
Genuine PULL-A K2 Sub-Board
- Pulled from working Samsung A528B donor devices
- Full Samsung charging IC with overcurrent protection
- 25W Samsung Super-Fast Charging speed restored
- Vendor-tested for both fast charge and mic clarity
- Antenna contacts spring back to factory tension
- Functional 10/10 with no bent FPC pins
- 12-month replacement warranty on the sub-board
- Bench inspected before dispatch from Forest Lake
Cheap Aftermarket Copy
- Factory clone — not real Samsung silicon
- Charging IC protection circuits are cut to save cost
- Caps fast charging speed at 5W or refuses to fast-charge
- Mic noise gate fails — callers hear hissing or echo
- Antenna springs lose tension after the first install
- Bent or shallow FPC pins cause intermittent contact
- No vendor warranty — DOA returns refused
- Risk of damaging the A52s mainboard charging line
Bring It In For Workshop Fitting
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Shipping And Payment
- Dispatch: 2-4 business days from Forest Lake QLD
- Brisbane Metro: 1-3 business days after dispatch
- Sydney and Melbourne: 3-5 business days after dispatch
- Perth and Regional QLD: 5-7 business days after dispatch
- Tracking number issued on every order
- Pickup available from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Pay your way — Afterpay and Klarna available at checkout.
Buyer FAQs
Browse Related Categories
JPC Mobile Promise
Genuine PULL-A K2 charging port sub-board for Samsung Galaxy A52s 5G A528B. Backed by a 12-month warranty.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Payment Options
We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.
Shipping & Processing Information
Processing Time
All orders require 2-4 business days for processing, regardless of shipping method.
This includes order verification, picking, packing and preparation for dispatch.
You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.
Shipping Methods
Standard: 3-7 business days in transit after processing
Express: 1-2 business days in transit after processing
Express shipping only affects delivery time once dispatched, not processing time.
Express shipping does not expedite the 2-4 business day processing time.