Brisbane Technical Hub

Held in real local stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Trade pickup welcome.

Authenticity Guaranteed

Genuine BQ7 tier-A+ Liquid Retina panel. Native 2360x1640 at 264 ppi with 12-month vendor warranty.

Reliable Dispatch

Standard 2-4 business day dispatch. Foam-lined fragile-rated packaging on every panel.

What You Get

BQ7 LCD panel with pre-attached FPC flex cable and protective film.

What You Provide

Your existing digitizer, adhesive strips and pentalobe install tools.

Good News — No OCA Bond

iPad 10 and 11 are non-laminated. The digitizer simply lifts off the LCD.

Wrong Part If Glass Cracked

Cracked digitizer too? You need the LCD plus digitizer combo, not this LCD-only listing.

iPad 10th Gen (2022)

Models: A2696, A2757, A2777

Released October 2022. A14 Bionic chip.

USB-C port. Landscape FaceTime camera.

Touch ID built into the top button.

iPad 11th Gen (2025)

Models: A3354, A3355, A3356

Released March 2025. A16 chip with Apple Intelligence.

USB-C port. Landscape camera.

Touch ID built into the top button.

iPad 9 (2021) and Earlier

Different 10.2″ chassis with Lightning port. Different LCD entirely.

iPad Air 4, Air 5, Air 6

Air models use a laminated 10.9″ panel. Different connector and bonding.

iPad Pro 11″ or 12.9″

Pro models use ProMotion or OLED panels. Wrong technology family.

iPad mini 6 or mini 7

mini chassis is 8.3″. Smaller panel with different flex orientation.

Cracked Digitizer Customers

Need the LCD and digitizer together? Order the full assembly listing instead.

Genuine Apple Service-Pack Buyers

BQ7 is premium aftermarket, not genuine Apple. Visit an Apple AASP for service-pack parts.

Included In This Order

BQ7 LCD display panel — 10.9-inch Liquid Retina.

Pre-attached FPC flex cable for direct logic-board connection.

Integrated backlight module — no separate assembly needed.

Protective film over the active area — peel before install.

Anti-static foam-lined retail packaging.

Not Included — You Provide

Digitizer (touch glass) — transfer from your existing iPad.

Digitizer flex cable — keep from your original part.

Adhesive strips — pre-cut TESA tape or equivalent.

Install tools — heat plate, picks, pentalobe driver.

Frame separation tools if reusing the original frame.

OEM-Equivalent Cell Quality

BQ7 panels use OEM surplus or salvaged cells re-laminated to spec. Near-OEM colour accuracy.

Native 2360 x 1640 Resolution

Pixel-perfect Liquid Retina output at 264 ppi. Matches the original iPad panel one-for-one.

500-Nit Brightness Output

Matches Apple's 500-nit typical brightness spec. Indoor and outdoor visibility intact.

Pre-Attached FPC Flex

OEM-spec FPC ribbon already bonded. No flex transfer needed. Plug in and test.

12-Month Vendor Warranty

BQ7 backs every panel for 12 months against dead pixels, lines and backlight failure.

True Tone Signal Compatible

Aftermarket panels lose factory True Tone calibration. Image quality remains high in all modes.

Dead Pixels or Pixel Lines

Stuck colour patches or thin lines across the panel. Common after a drop or impact.

Backlight Failure

Touch and audio still work but the screen stays black. Backlight LED chain has failed.

Screen Bleeding or Bright Spots

Light leaks at the panel edges. Pressure damage to the LCD layer.

Colour Distortion or Tint

Permanent yellow, pink or green cast. The colour layer has been damaged.

Half-Screen or Full Black

Half the panel goes dark or the entire image disappears. Internal LCD ribbon damage.

Internal Cracks Behind Glass

Spider-web cracks visible inside. The outer glass digitizer is intact, only the LCD broke.

Flicker on Wake or Boot

Screen flickers when waking from sleep. Cold-joint failure on the LCD flex.

Image Persists After Reboot

Fault stays after a hard restart and recovery. Confirms the panel is the issue.

iPad Repair Shops

Daily LCD-only swaps for dropped iPads with intact digitizers. Bench-grade trade part.

iPad Refurbishers

Restoring used iPad 10 and iPad 11 stock for resale. Higher trade-in margins.

Schools and Education Tech

School fleet iPads suffer LCD-only damage from drops. Cheaper than full assembly swaps.

Insurance Repair Assessors

LCD-only fix beats a full write-off claim. Cheaper for the insurer and the customer.

Trade-In and Buyback Shops

Recover dead-LCD trade-ins for resale. Higher buy-back margin on revived units.

Confident DIY Repair Techs

Intermediate skill level only. Pentalobe driver and heat plate are required.

Regional and Rural AU Techs

No iPad parts supplier nearby. Tracked courier delivers to every Australian state.

Apple Out-of-Warranty Drop-Outs

Apple AU charges full screen replacement. Trade-grade LCD swap costs less.

No OCA Bond — Lift The Digitizer

iPad 10 and 11 use a non-laminated design. The digitizer lifts off the LCD with picks.

Heat The Adhesive Frame Only

Use a heat plate at 70C on the chassis perimeter. Soften the frame adhesive, not the panel.

Disconnect The Battery First

Always lift the battery FPC before pulling the LCD flex. Stops accidental short-circuits.

Peel The Protective Film Last

Leave the factory film on until the LCD is seated. Stops dust under the digitizer glass.

Test Before Reassembly

Plug the LCD in, power up and verify image quality before fitting digitizer adhesive.

True Tone Will Be Lost

Aftermarket panels lack factory True Tone calibration. Disable True Tone in Settings.

Inspect Pixels Before Sealing

Run a full-screen black, white and red test image. Catch dead pixels before adhesive sets.

No Returns Once Adhesive Set

Inspect on receipt under workshop lighting. Confirm clean panel before fitting adhesive.

Brand / Grade

BQ7 tier-A+ aftermarket

Part Type

LCD panel only (no digitizer)

Display Type

IPS Liquid Retina LCD

Screen Size

10.9 inches (marketed 11″)

Resolution

2360 x 1640 pixels

Pixel Density

264 ppi

Brightness

500 nits typical

Refresh Rate

60 Hz

Lamination

Non-laminated (digitizer separate)

Flex Cable

Pre-attached OEM-spec FPC

Backlight

Integrated LED module

True Tone

Lost on aftermarket panel

Compatible Models (iPad 10)

A2696, A2757, A2777

Compatible Models (iPad 11)

A3354, A3355, A3356

Install Skill Level

Intermediate (no OCA work)

Pre-Dispatch Check

Bench inspected before dispatch

Warranty

12-month BQ7 vendor warranty

Dispatch

Standard 2-4 business days

Stocked in Brisbane

Held at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Real local inventory.

Tracked Delivery to Every State

Posted via tracked courier or AusPost express. Foam-lined fragile-rated boxes.

Pay Your Way

Pay your way — Afterpay and Klarna available at checkout for trade and bench buyers.