Replace cracked or unresponsive touch glass on a compatible iPad 10th generation or iPad (A16) with this black BQ7 touch digitizer featuring a fitted touch IC connector.
This is the front touch digitizer and glass only. The LCD display is not included. It is suitable when the image remains clear but the outer glass is cracked, touch is intermittent, or sections of the touchscreen do not respond. If the display has lines, ink-like marks, dead pixels, no image or backlight failure, you may need an LCD or complete display assembly instead.
Compatible iPad models
-
iPad 10th generation (2022): A2696, A2757, A2777
-
iPad (A16) / 11th generation (2025): A3354, A3355, A3356
Check the model number printed on the rear housing or in Settings before ordering. This part is not suitable for iPad Air, iPad Pro or earlier standard iPad models.
Key features
- Black bezel touch digitizer/front glass
- Fitted touch-controller IC and attached flex cable
- Designed for the exact model numbers listed above
- Restores touch input when the existing LCD image is still working
- Single replacement digitizer supplied
These iPad models do not have a front Home button. Touch ID is built into the top power button, and the landscape-edge opening is for the front camera and sensor area.
Installation advice
Professional installation is strongly recommended. Disconnect the battery before connecting or removing display parts, protect the LCD during removal, and test touch response across the full panel before applying final adhesive or sealing the device. Damage caused by incorrect fitting, torn flex cables, bent connectors, impact or liquid exposure is not a manufacturing defect.
Availability and warranty
This product is available to order from JPC Mobile - Tech Repair & Accessories. Local stock may vary, and additional units can normally be sourced from our supplier.
Covered by a 12-month product warranty against manufacturing defects, subject to assessment and correct installation. This warranty does not limit any rights or remedies available under the Australian Consumer Law.
Frequently asked questions
Does this include the LCD?
No. It includes the black touch digitizer/front glass with fitted IC and flex cable only.
Will it fit the 2025 iPad with the A16 chip?
Yes, when the model number is A3354, A3355 or A3356.
Does it fit every iPad 10 or 11-inch model?
No. Match one of the six model numbers above before ordering.
