Replace a damaged display on an iPhone 16 Pro Max with this BQ7 Diagnosable Incell LCD screen assembly. The exact supplier part is a 120 Hz-capable, configuration-ready aftermarket display designed for repair technicians and experienced installers. It is supplied as a part only; the product price does not include installation or a completed phone repair.
Important: aftermarket Incell LCD, not an Apple OLED
This is a BQ7 aftermarket Incell LCD assembly. It is not a genuine Apple display, an Apple service part or an OLED panel. Apple specifies a 6.9-inch Super Retina XDR OLED display with adaptive ProMotion up to 120 Hz for the original iPhone 16 Pro Max. This replacement uses LCD technology and can differ from the original screen in brightness, contrast, black levels, colour reproduction, viewing angles, thickness, power use and outdoor visibility. Choose it when a lower-cost 120 Hz-capable replacement is more important than reproducing every characteristic of the factory OLED.
Exact compatibility
Made only for the iPhone 16 Pro Max introduced in 2024, including model numbers A3084, A3295, A3296 and A3297. Apple identifies these numbers as regional versions of the same 6.9-inch iPhone 16 Pro Max.
-
Compatible: iPhone 16 Pro Max — A3084, A3295, A3296 and A3297.
-
Not compatible: iPhone 16 Pro, iPhone 16 Plus, iPhone 16, iPhone 16e or an earlier/later iPhone model.
Check Settings > General > About > Model Number before ordering. If the existing display cannot be used, verify the model from the device or original purchase record.
Key product details
- BQ7 Best Quality Aftermarket screen assembly.
- Incell LCD panel with bonded capacitive touch digitiser.
- 120 Hz-capable replacement for smoother compatible motion and scrolling.
- Diagnosable and configuration-ready according to the exact supplier listing.
- Dynamic Island-shaped upper cut-out and iPhone 16 Pro Max-specific flex layout.
- Metal rear plate and attached display flexes as shown in the product images.
- Exact supplier SKU: BQ7-Incell-16PM-Diagnose.
- Exact item identifier: 9357575105526.
What configuration-ready means
Crazy Parts states that this configuration-ready part was tested and verified through diagnostics before shipping and that the device recognised it as a used display. If diagnostics cannot be completed, the supplier instructs installers to update the iPhone to the latest compatible iOS version.
Configuration-ready does not mean that every iPhone will show identical diagnostic results or that every repair-related message will disappear. Results depend on the phone, installed iOS version, condition of the original components and correct installation. Do not confuse this diagnosable version with a separate BQ7 screen advertised only as compatible for IC-chip transfer.
Diagnostic limitations to check before installation
- If the battery or rear camera has been replaced with a non-genuine part, the iPhone may be unable to complete the overall diagnostic process.
- If the ambient-light-sensor flex has previously been replaced, the display diagnostic can fail.
- A diagnostic failure caused by another component is not evidence by itself that this screen is defective.
- Face ID depends on the phone's original TrueDepth and sensor hardware. This display assembly does not repair an existing Face ID fault.
- True Tone, automatic brightness and other display functions depend on the device, software, transferred components and repair procedure; they are not guaranteed merely by fitting a replacement panel.
120 Hz use and display expectations
The exact BQ7 supplier product is specified as 120 Hz. Actual refresh behaviour can vary with iOS settings, content, temperature, power state and application support. This is an aftermarket LCD implementation, not the adaptive Apple OLED panel used in a new iPhone 16 Pro Max. Do not advertise or resell it as a genuine Apple ProMotion display.
The supplier's guidance image recommends disabling Always-On Display for iPhone 14 Pro through iPhone 16 Pro-series Incell installations to reduce continuous backlight operation, heat and battery drain. Review the phone's display settings after fitting and explain the LCD/OLED difference to the end user.
Professional installation strongly recommended
Screen replacement requires controlled opening, safe battery disconnection, careful sensor handling and correct resealing. Flex cables and display glass are easily damaged by over-bending, pressure, tools or powering the phone with connectors misaligned. Installation should be performed by a trained repair technician. JPC Mobile - Tech Repair & Accessories is not representing the part-only price as an installed repair price.
- Confirm the exact model number and inspect the phone for frame distortion, liquid damage and other faults.
- Disconnect the battery before attaching or removing display connectors.
- Connect and test the assembly before removing protective films or applying final adhesive.
- Check image, touch across the full panel, brightness, proximity behaviour, front camera, earpiece, Face ID status and diagnostic results.
- Stop if there is abnormal heat, flicker, lines, no touch or connector resistance. Recheck the installation without forcing any connection.
- Only complete the seal after all required functions pass testing.
Water-resistance notice
Opening an iPhone can reduce its original water and dust resistance. Replacement adhesive and careful installation may help with sealing, but JPC Mobile does not promise restoration of the original IP rating after a screen repair. Keep the device away from liquid and moisture after repair.
What's included
- 1 x BQ7 Diagnosable Incell LCD screen and touch assembly for iPhone 16 Pro Max.
The phone, installation labour, programming equipment and repair tools are not included. Confirm any required display adhesive and transferable sensor or earpiece components before beginning the repair.
Availability
This part may be ordered when local shelf stock is zero because JPC Mobile - Tech Repair & Accessories normally fulfils it through an Australian supplier. The exact supplier listing showed 43 units in Sydney and 26 in Melbourne when checked on 7 September 2026. Supplier availability and dispatch timing can change before an order is processed.
12-month product warranty and Australian Consumer Law
The exact supplier listing states a 365-day warranty for this BQ7 screen. JPC provides a 12-month limited product warranty for eligible manufacturing defects, subject to inspection and the applicable warranty process. Test the display before final installation and retain purchase details.
Physical damage, cracked glass or LCD, torn flex cables, connector damage, pressure marks, liquid exposure, heat damage, incorrect installation and faults caused by another phone component are not manufacturing defects. This warranty wording does not exclude, restrict or modify any consumer guarantees, rights or remedies that cannot be excluded under the Australian Consumer Law.
