3M VHB Clear Double Sided Tape — 2mm × 25m — Camera Module, Bezel-less Phone, Smartwatch, Micro Sensor, Earphone, Eyewear Repair
Genuine 3M VHB acrylic foam tape at the narrowest width in the range. The 2mm width puts full VHB technology — foam core, vibration absorption, waterproof, -40°C to +149°C range — into the smallest possible bond. Built for jobs where every millimetre matters.
✓ In Stock — Ships within 2–4 business days
JPC Mobile | Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
📞 0480 039 913
Brisbane Technical Hub
Stocked at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Fast dispatch across Australia. Call 0480 039 913 for product advice.
Authenticity Guaranteed
100% genuine 3M VHB tape. Used daily in our Forest Lake repair shop. Not an imitation — every roll is correctly specified 3M VHB.
Reliable Dispatch
Ships within 2–4 business days from Forest Lake, Brisbane. Tracked delivery to every state and territory in Australia.
🏆 2mm VHB — Full VHB Technology in the Smallest Width
Wider VHB tapes cannot fit the ultra-narrow channels in modern electronics. The 2mm width was built for these jobs.
💪 Full VHB Foam Core
Even at 2mm width, this tape has the full acrylic foam core. It absorbs vibration, fills microscopic surface gaps, and bonds stronger than transfer tape at the same width.
📱 Made for Modern Electronics
Bezel-less smartphones, ultra-thin smartwatches, and compact earphones all have channels under 3mm. The 2mm VHB fits where no other VHB roll can.
🌡️ Full Temperature Range
Rated -40°C to +149°C. Safe in frozen environments and hot electronic internals alike. Camera modules and sensors often run hot — this tape handles it.
🏭 Eight Industries That Use VHB 2mm
The 2mm width opens markets that every wider VHB roll cannot reach — ultra-narrow channels in precision electronics.
Bezel-less Phone Repair
Modern smartphones with near-zero bezels have border channels of 1–3mm. Only the 2mm VHB fits these channels with the full foam bond.
Camera Module Mounting
Phone and tablet camera modules are secured with narrow tape. The foam core absorbs vibration from OIS camera systems and motor movement.
Smartwatch Bezel Repair
Apple Watch, Samsung Galaxy Watch, and Garmin wearables use narrow bezel tape. The 2mm VHB bonds the display back to the case permanently.
Micro Sensor Mounting
IoT sensors, proximity sensors, accelerometers, and small PCB components are bonded with 2mm VHB. Resists vibration in mobile and industrial use.
Earphone & IEM Assembly
In-ear monitor and earphone shells use 2mm tape for driver mounting and housing bonding. The foam absorbs driver vibration inside the housing.
Eyewear Repair
Nose pad bonding, bridge reinforcement, and temple tip attachment on glasses and sunglasses. The foam provides a slight cushion at the bond point.
Scale Models & RC
Fine detail bonding on scale model cars, aircraft, and RC builds. The 2mm width bonds window rubbers, fine trim strips, and small body details.
Precision Electronics Assembly
Hearing aid components, medical device sensors, and compact wearable electronics need ultra-narrow foam bonding. The 2mm VHB fits these tight assemblies.
👥 Who Buys VHB 2mm
Phone Repair Techs
Camera module tape and bezel-less screen tape. The 2mm VHB is the correct width for camera module perimeter bonding inside modern flagship phones.
Wearable Device Repair Techs
Apple Watch, Samsung, Garmin, and Fitbit repairs all need narrow bezel tape. The 2mm VHB gives a permanent waterproof bond for devices worn daily.
Audio Equipment Repairers
IEM and earphone assembly and repair. Foam tape at 2mm absorbs driver vibration and holds housing halves together without adding audible resonance.
Opticians & Eyewear Repairers
Nose pad replacement, bridge repair, and frame bonding. The 2mm foam gives a slight cushion at the bond point — useful on frames that contact skin.
Scale Modellers
Detail bonding on 1:10 to 1:87 scale models. The 2mm width fits door seals, window rubbers, and fine trim lines on scale car and aircraft models.
Electronics Makers & Engineers
Prototype and production bonding for sensors, IoT devices, and compact wearable electronics. The 2mm VHB works in tight assemblies that wider tape cannot access.
✨ Key Features
💪 VHB Foam Core at 2mm
Full acrylic foam carrier even at the narrowest width. Absorbs vibration, fills micro gaps, and bonds stronger than any transfer tape at 2mm.
🌡️ -40°C to +149°C Range
Works from frozen storage to hot electronic internals. Camera sensors and processors run hot — this tape holds securely at operating temperatures.
💧 Waterproof
Fully waterproof bond. Safe for wearable devices, splash-proof smartphones, and IoT sensors deployed in outdoor or wet environments.
🔍 Precision 2mm Width
Fits channels where 3mm, 5mm, or wider tape would cause overhang. No trimming required on most bezel-less phone and camera module repairs.
🔇 Vibration Absorption
The foam core damps vibration. Camera modules, speakers, and motors all generate vibration that transfer tape cannot absorb. VHB foam can.
📦 25m Workshop Roll
25 metres at 2mm. Covers dozens of camera module replacements or hundreds of sensor bonding jobs. Stores compactly in any repair bench drawer.
📋 Technical Specifications
⚠️ Important Before You Apply
- Clean both surfaces with IPA first. Grease, dust, and skin oil all reduce bond strength at this small scale.
- Use tweezers for placement. At 2mm width, finger placement risks misalignment. Tweezers give accurate control.
- Press firmly for 30 seconds after bonding to activate both adhesive faces.
- This is a permanent bond. VHB is not designed for removal. Plan placement before pressing.
- Apply above 15°C. Cold surfaces reduce initial tack. Warm the surface before applying in cool conditions.
- Wait 24 hours for full bond strength to develop before loading the joint.
🚚 Shipping Information
Brisbane Dispatch:
- Ships within 2–4 business days
- Tracked Australia-wide delivery
- Protective roll packaging
Estimated Delivery Times:
- Brisbane metro: 1–3 days after dispatch
- Sydney / Melbourne: 3–5 days
- Regional areas: 5–7 days
Pay your way — Afterpay and Klarna available at checkout.
Browse Related Categories
JPC Mobile — Forest Lake, Brisbane
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Mon–Fri 9am–5pm | Sat 10am–5pm
📞 0480 039 913
Payment Options
We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.
Shipping & Processing Information
Processing Time
All orders require 2-4 business days for processing, regardless of shipping method.
This includes order verification, picking, packing and preparation for dispatch.
You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.
Shipping Methods
Standard: 3-7 business days in transit after processing
Express: 1-2 business days in transit after processing
Express shipping only affects delivery time once dispatched, not processing time.
Express shipping does not expedite the 2-4 business day processing time.