REDEFINE drop tests the Heavy Duty case to 3 metres (10 feet) onto concrete in controlled lab conditions. The dual-layer PC outer shell takes the impact while the TPU inner liner absorbs the shock energy. Reinforced corners with internal air pockets carry the worst of any rotational landing.

Real-world drops are more variable — landing angle, surface, ambient temperature and chassis condition all matter. The case is engineered to dramatically improve survival odds, not to make the phone indestructible. Pair it with a tempered glass screen protector for full coverage.

No. This case is moulded specifically for the Samsung Galaxy S22 Ultra (SM-S908) chassis only. The S22 (SM-S901) is a smaller 6.1″ phone. The S22+ (SM-S906) is 6.6″ with a different camera layout and no S Pen silo. The S23 Ultra (SM-S918) has the same screen size but a revised camera island geometry. The S24 Ultra (SM-S928) has a flat display and a redesigned titanium frame.

Verify your model number under Settings, About Phone, Model Number. Australian Galaxy S22 Ultra almost always shows SM-S908B. If yours shows anything else from the SM-S908 family (S908U, S908E, S908N, S908W, S908J, S9080) the case still fits.

Yes. The bottom-edge cutout aligns with the S22 Ultra's built-in S Pen silo. Pull and re-dock the S Pen normally without removing the case. This is one of the basic requirements for an S22 Ultra-specific case — generic "S22 series" cases routinely fail this test.

Note your S Pen sits in the bottom-left of the silo (when held screen-up). The cutout is moulded to that location only.

Yes. Standard Qi wireless charging works through the case without removal. The total case thickness sits within the Qi spec for safe induction transfer to the S22 Ultra's wireless coil. PowerShare reverse-wireless charging from the rear glass also works through the case.

Note: aftermarket fast wireless chargers above 15W may run slower or warmer with any case fitted — this is normal for any heavy duty case on any phone.

Yes. The camera lip is approximately 1.5–2.0 mm tall, which fully covers the height of the S22 Ultra's separate-lens camera island. The case lip becomes the contact point with any flat surface, not the camera glass. Lenses-down in a pocket or bag is also safe from grit and surface contact.

Each lens still sits in its own clearance ring — no pinching of the lens rings, no shadow or vignette in the photo or video frame.

Yes, with one caveat. The S22 Ultra has a curved Dynamic AMOLED 2X display. Standard flat tempered glass protectors do not bond properly to a curved display. Use a UV liquid-glue tempered glass protector designed for the curved S22 Ultra screen for full edge-to-edge coverage and clean compatibility with the case lip.

PET soft film and TPU film protectors also work with this case. Plastic-edge tempered protectors usually do not, because the case lip and the protector edge fight each other for the same millimetre of space.

REDEFINE Heavy Duty sits in the same dual-layer PC plus TPU protection class as Otterbox Defender, Spigen Tough Armor, UAG Pathfinder and Supcase Unicorn Beetle Pro. All four use a hybrid hard-outer plus soft-inner construction with raised front and rear lips. REDEFINE adds the forward-facing acoustic channel and S Pen silo cutout that some competitors leave out of their S22 Ultra moulds.

The main practical difference between brands at this protection class is fit precision on the specific chassis and price. REDEFINE is engineered specifically for the SM-S908 camera plate and S Pen silo geometry, and is competitively priced for the Australian market.

No. Phone cases and accessories do not carry a manufacturer warranty. Cases are designed to absorb impact, abrasion and daily wear — that is the whole purpose — so a warranty against drop damage to the case itself does not apply.

Each case is bench-inspected before dispatch from Brisbane. If your case arrives with a visible moulding defect, misaligned cutout or split corner from the factory, contact us within 30 days for a replacement under Australian Consumer Law.

Yes — this is a true heavy duty case, not a slim case. The dual-layer PC and TPU build adds noticeable thickness and weight compared to a single-layer silicone or TPU bumper. That added bulk is what delivers the 3-metre drop survival, the reinforced corners and the acoustic channel. There is no shortcut to real protection.

If you want minimal bulk and are happy with a 1-metre bench-drop level of protection, look at a slim TPU case instead. If you want the most protection a hand-held case can deliver, this is the right product.

All orders ship in 2-4 business days from real Brisbane stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Tracked courier delivery to every state and territory in Australia. Brisbane metro click-and-collect is available the same business day stock is reserved.

Pay your way — Afterpay and Klarna available at checkout.