Samsung Galaxy S24 Ultra SM-S928B Original OLED Screen And Frame Assembly — Titanium Black
This is a genuine original Samsung OLED screen for the Galaxy S24 Ultra. It fits the SM-S928B model only. The part includes the OLED panel and the pre-installed frame. It uses a Dynamic LTPO AMOLED 2X panel. The screen measures 6.8 inches at QHD+ resolution. Peak brightness reaches 2600 nits for bright sunlight. The refresh rate adapts from 1Hz to 120Hz. The display is flat, protected by Corning Gorilla Armor. The frame colour is Titanium Black. It carries a 12-month warranty by default.
Signs Your S24 Ultra Needs A New Screen
Match your fault below before you order.
Cracked Glass
The front glass is smashed, chipped or spider-cracked.
Black Or Blank Display
The phone powers on but the screen stays dark.
Green Or Pink Lines
Vertical lines run down the panel after a knock.
Dead Touch
Parts of the screen no longer respond to taps.
Ghost Touch
The screen taps or types on its own without you.
Flicker Or Burn-In
The image flickers, dims or shows a faint ghost image.
12-Month Warranty On This Genuine Screen
Every genuine original OLED assembly is covered for twelve months against defects.
Brisbane Technical Hub
Based in Forest Lake with local repair support. Ask us for fitment advice.
Authenticity Guaranteed
Genuine original Samsung OLED panels restore true factory colour and brightness.
Reliable Dispatch
Standard 2-4 business day dispatch Australia-wide. Packed to arrive safe.
Why Choose A Genuine Original OLED
An original OLED panel restores true Samsung display quality.
Factory Colour Accuracy
You get true Samsung colour and calibration back.
Full 2600-Nit Brightness
Genuine panels hit real peak brightness, not a dim copy.
Real Gorilla Armor Glass
The anti-reflective Gorilla Armor layer is the genuine part.
Ultrasonic Fingerprint
The under-display fingerprint sensor keeps working correctly.
Confirm The Screen Is The Fault
Run these checks before you replace the display.
- Confirm the phone is a Galaxy S24 Ultra SM-S928B.
- Check the glass, display and touch faults listed above.
- Try a force restart to rule out a software freeze.
- Connect a charger to confirm the phone still powers on.
- Cast to a TV to check the phone itself works.
- If the image casts fine, the screen is the fault.
- Inspect the display flex for obvious impact damage.
- Ask our Brisbane team if you are unsure.
Install Notes — Advanced Repair
- Back up all data before you start the repair.
- Remove the rear glass with gentle, even heat.
- Disconnect the battery first for safety.
- Transfer all internal parts to the new frame.
- This includes the battery, cameras and daughterboard.
- Wear an anti-static strap to protect the boards.
- Apply fresh adhesive to keep the water seal.
- Recalibrate the fingerprint sensor after assembly.
Difficulty: advanced. We recommend a skilled technician.
Tools You Will Need
Heat Pad Or Blower
Softens the rear glass and display adhesive.
Suction Cup
Lifts the rear glass to start the opening.
Plastic Picks And Spudger
Separate adhesive and unclip the connectors safely.
Phillips Precision Driver
Removes the internal bracket and shield screws.
Tweezers
Handle small screws and delicate flex cables.
Adhesive And Sealing Kit
Reseals the phone to keep water resistance.
Full Specifications
Fitment — S24 Ultra SM-S928B Only
Fits This Model
The frame colour is Titanium Black. It suits any S24 Ultra board.
Does NOT Fit
- Galaxy S23 Ultra (SM-S918B) — curved display.
- Galaxy S25 Ultra (SM-S938B) — different assembly.
- Galaxy S24 (SM-S921B) — smaller 6.2-inch.
- Galaxy S24+ (SM-S926B) — different 6.7-inch panel.
- Galaxy S22 Ultra (SM-S908B) — curved display.
- Check your model in Settings before ordering.
Genuine Original OLED
- Genuine original Samsung OLED panel.
- Full 2600-nit peak brightness.
- Accurate factory colour and calibration.
- Genuine anti-reflective Gorilla Armor glass.
- Ultrasonic fingerprint keeps working.
- Covered by a 12-month warranty.
Aftermarket Clone Panel
- Often much dimmer than the original.
- Colours can look washed out or cool.
- Glass may lack the anti-reflective coating.
- The fingerprint sensor can fail or lag.
- Touch response is frequently less accurate.
- Usually carries little or no warranty.
Visit Us In-Store
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Brisbane Technical Hub
Local fitment advice from our team.
Authenticity Guaranteed
Genuine original Samsung OLED panels only.
Reliable Dispatch
Dispatched Australia-wide in 2-4 business days.
Shipping Australia-Wide
- Dispatch is 2-4 business days from Forest Lake QLD.
- Brisbane metro arrives in 1 to 3 days.
- Sydney and Melbourne arrive in 3 to 5 days.
- Perth and regional areas take 5 to 7 days.
- Every order is tracked via Australia Post.
- In-store pickup is ready at Shop 3A.
Pay your way — Afterpay and Klarna available at checkout.
Frequently Asked Questions
Browse Related Categories
Pay your way — Afterpay and Klarna available at checkout.
The JPC Mobile Quality Promise
Every OLED assembly is verified before it leaves our Forest Lake store. Genuine parts, honest descriptions and reliable dispatch Australia-wide.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
Payment Options
We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.
Shipping & Processing Information
Processing Time
All orders require 2-4 business days for processing, regardless of shipping method.
This includes order verification, picking, packing and preparation for dispatch.
You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.
Shipping Methods
Standard: 3-7 business days in transit after processing
Express: 1-2 business days in transit after processing
Express shipping only affects delivery time once dispatched, not processing time.
Express shipping does not expedite the 2-4 business day processing time.