• Send Us a Message
    • Ir a contenido
    Samsung Galaxy S22 5G LCD CTC Flex Cable PULL-A GH82-27554A SM-S901B Display Flex Screen Component JPC MOBILE ACCESSORIES

    Samsung Galaxy S22 5G LCD CTC Flex Cable PULL-A GH82-27554A SM-S901B Display Flex

    $0.00 - $0.00
    $0.00
    $8.14
    $8.14 - $8.14
    $8.14
    SKU Pull-LCDFlex-S22
    PULL-A Genuine Pulled · Samsung GH82-27554A · 12-Month Warranty

    Samsung Galaxy S22 5G LCD CTC Flex Cable — PULL-A Grade GH82-27554A

    Genuine PULL-A grade LCD CTC flex cable for Samsung Galaxy S22 5G. Pulled from working original Samsung devices. Samsung service-pack part number GH82-27554A. Direct fit for SM-S901B and SM-S901B/DS. Restores connection between the 6.1-inch Dynamic AMOLED 2X display and main board. Fixes black screens, flickering, lines and no-display faults. Snap-on FPCB connector with gold-plated pins. No soldering required for swap. Bench-tested, packed and dispatched from Forest Lake QLD. Backed by 12-month parts warranty.

    PULL-A Genuine Pulled GH82-27554A Service Part Snap-On FPCB Connector Gold-Plated Signal Pins 12-Month Warranty
    Dispatched From Forest Lake QLD Bench Tested Ships 2-4 Days AU-Wide

    Symptoms This Flex Cable Fixes

    Black Screen On Boot

    Phone vibrates and rings but the AMOLED stays dark.

    Flickering Display

    Screen flashes random colours or cuts in and out.

    Lines On The Screen

    Vertical or horizontal stripes appear over the AMOLED.

    No Display After Drop

    Screen went blank after a knock or impact event.

    Display Cuts When Bent

    Image cuts when the phone is squeezed or twisted.

    Failed Screen Swap

    New AMOLED fitted but display still does not work.

    Backed By 12-Month Parts Warranty

    Vendor-confirmed warranty on every PULL-A LCD flex cable. Bench-tested before dispatch.

    Brisbane Technical Hub

    Forest Lake repair workshop. Real Samsung-trained techs on-bench.

    Authenticity Guaranteed

    Genuine Samsung PULL-A pulled from real working devices.

    Reliable Dispatch

    Standard 2-4 business-day shipping AU-wide. Tracking on every order.

    Jump To

    Why PULL-A Beats Aftermarket Copies

    PULL-A means pulled from a real working Samsung device. Top tier above any aftermarket clone.

    Genuine Samsung FPCB

    Original Samsung-printed circuit board. Same trace layout as new.

    Service-Pack Part Number

    GH82-27554A is the Samsung service catalogue identifier.

    Pulled Working, Not Faulty

    PULL-A units come from devices retired for cosmetic reasons.

    Honest Aftermarket Tier

    PULL-A is not new service-pack stock. Honest grade labelling.

    Confirm It Is The Flex Cable Before Swapping

    A bad screen and a bad flex look the same. Run this test first.

    • Plug the phone in. Confirm vibration and ringtone still work.
    • Try a hard reset by holding power and volume down for 10 seconds.
    • Press around the screen edges. Watch for image flicker on press.
    • Squeeze the phone gently. If image cuts, the flex is suspect.
    • Try a known-good donor display if available for a swap test.
    • If the donor display also fails, the LCD flex is the cause.
    • If swap fixes it, save the donor flex for future use.
    • Order this PULL-A flex once the fault is confirmed.

    Install Notes — Read Before Starting

    Mid-difficulty repair. Bring it to our Forest Lake bench if unsure.

    • Power off the phone fully before opening the back glass.
    • Heat the back glass with an iOpener or low heat gun.
    • Use a suction cup and plastic pick to lift the back glass.
    • Disconnect the battery before touching any display flex.
    • Note the screw positions — Samsung uses Phillips PH00 inside.
    • Lift the old LCD flex straight up off the board contact.
    • Align the new PULL-A flex over the same contact pad.
    • Press down evenly until the snap-on connector clicks home.
    • Re-test display before re-sealing back glass with adhesive.
    • Apply replacement back glass adhesive for proper sealing.

    Tools Needed For The Swap

    iOpener Or Heat Gun

    Soft heat releases the back glass adhesive without warping.

    Suction Cup

    Lifts the warmed back glass straight off without flexing.

    Phillips PH00 Driver

    Standard Samsung internal screw driver size.

    Plastic Pick And Spudger

    Safe pry tools for lifting glass and flex connectors.

    ESD Wrist Strap

    Protects board chips from static-shock damage.

    Replacement Adhesive

    Pre-cut S22 back-glass adhesive strip for re-sealing.

    Full Specifications

    Part Type

    LCD Display CTC Flex Cable

    Grade

    PULL-A (Genuine pulled, top tier)

    Samsung Part Number

    GH82-27554A

    Confirmed Fitment

    SM-S901B · SM-S901B/DS

    Compatible Phone

    Samsung Galaxy S22 5G (2022)

    Display Size

    6.1-inch Dynamic AMOLED 2X

    Display Resolution

    2340 × 1080 FHD+ at 120Hz

    Connector Type

    Snap-on FPCB (no soldering)

    Pin Plating

    Gold-plated signal pins

    Material

    Genuine Samsung FPCB substrate

    Function

    Routes display signal between AMOLED and main board

    Fixes Faults

    Black screen, flicker, lines, no display

    Tools Needed

    Heat, suction, PH00, spudger, ESD strap

    Difficulty

    Mid-level (back-glass entry required)

    Soldering

    Not required (snap-on connector)

    Box Contents

    1 × LCD CTC flex cable (PULL-A)

    Warranty

    12-month parts warranty (vendor confirmed)

    Vendor Source

    Verified PULL-A wholesale supplier

    Dispatch

    2-4 business days from Forest Lake

    Compatibility — Galaxy S22 5G Only

    Confirmed Direct Fit

    SM-S901B SM-S901B/DS Galaxy S22 5G (2022) 6.1-inch AMOLED model

    Likely Fits — Verify Your Model Number

    Same Samsung GH82-27554A part number across regional S901 variants.

    SM-S901U (US) SM-S901U1 (US Unlocked) SM-S901W (Canada) SM-S901N (Korea) SM-S9010 (China/HK) SM-S901E (India) SM-S901J (Japan)

    Does NOT Fit These Models

    • Galaxy S22+ (SM-S906) — bigger 6.6-inch display, different flex
    • Galaxy S22 Ultra (SM-S908) — different display, different flex
    • Galaxy S21, S23, S24 — completely different generation parts
    • Galaxy Note 10, Note 20 — Note-series flex layout
    • Galaxy A-series, M-series, Z Fold, Z Flip — not compatible
    • Any non-Samsung phone or tablet

    PULL-A vs Cheap Clone Flex

    Side-by-side. Why PULL-A wins for Samsung-grade reliability.

    PULL-A Genuine Pulled

    • Genuine Samsung FPCB substrate
    • Original GH82-27554A trace layout
    • Gold-plated pins for stable signal
    • Fits flush every time, no force needed
    • Works with original Samsung BMS protocols
    • Preserves 120Hz refresh rate output
    • Backed by 12-month parts warranty
    • No ghost touches or display lag

    Cheap Aftermarket Clone

    • Generic FPCB substrate, off-spec material
    • Reverse-engineered trace layout
    • Tin-plated pins corrode and lose signal
    • Often loose or oversized in the connector
    • Random flicker and dropouts under heat
    • 120Hz mode may revert to 60Hz
    • No warranty, no recourse on failure
    • Frequent ghost touches reported

    Pro Fitting At Our Brisbane Workshop

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Brisbane Technical Hub
    Bench-fit your PULL-A flex with experienced techs.
    Authenticity Guaranteed
    Genuine pulled Samsung parts only.
    Reliable Dispatch
    Tracked delivery Australia-wide.

    Shipping And Payment

    • Dispatch: 2-4 business days from Forest Lake QLD
    • Brisbane Metro: 1-3 business days after dispatch
    • Sydney and Melbourne: 3-5 business days after dispatch
    • Perth and Regional QLD: 5-7 business days after dispatch
    • Tracking number issued on every order
    • Pickup available from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Pay your way — Afterpay and Klarna available at checkout.

    Buyer FAQs

    +What does PULL-A grade actually mean?

    PULL-A means the part was pulled from a real working Samsung device.

    It is genuine Samsung FPCB, not aftermarket clone material.

    PULL-A is the highest-grade aftermarket tier below new service-pack stock.

    +Will this fit my Galaxy S22+ or S22 Ultra?

    No. This flex fits the standard Galaxy S22 5G only (SM-S901*).

    S22+ uses SM-S906 with a different 6.6-inch display flex.

    S22 Ultra uses SM-S908 with a totally different layout.

    +How do I know my flex cable is the fault?

    A bad flex shows flicker when you press the screen edges.

    Image cuts when you squeeze or twist the phone gently.

    A swap test with a known-good display confirms the diagnosis.

    +Do I need to solder this flex cable in?

    No soldering required. The connector snaps directly onto the board.

    You only need entry tools and a Phillips PH00 driver.

    Heat is needed to lift the back glass for access.

    +Will my 120Hz refresh rate still work after?

    Yes. PULL-A genuine Samsung flex preserves the full 120Hz output.

    Aftermarket clone flex often forces the display back to 60Hz.

    Original FPCB trace layout is the only safe path for 120Hz.

    +What if I have a different S901 model number?

    SM-S901B and S901B/DS are vendor-confirmed direct fit.

    Other regional variants (U, W, N, E, J, 0) use the same Samsung part.

    Confirm your model number in Settings before ordering to be safe.

    +What does the GH82-27554A part number mean?

    GH82-27554A is the Samsung service catalogue identifier.

    It is the official LCD CTC flex cable code for the Galaxy S22 5G.

    Match this number to confirm you have the correct part.

    +Can I have it fitted at your Forest Lake store?

    Yes. Bring your phone and the flex to Shop 3A, 152 Woogaroo St.

    Our Brisbane bench techs handle the swap and bench-test display output.

    Walk-in or book online for a faster turnaround time.

    +What is covered by the 12-month warranty?

    The 12-month warranty covers part defects on the PULL-A flex itself.

    Install damage, drops and water damage are not covered.

    Bench inspection before dispatch confirms each unit arrives intact.

    +How fast does this ship across Australia?

    Orders dispatch from Forest Lake within 2-4 business days.

    Brisbane metro arrives 1-3 days after dispatch.

    Sydney and Melbourne typically take 3-5 days. All orders ship tracked.

    Browse Related Categories

    Quality Seal

    JPC Mobile Promise

    Genuine PULL-A Samsung flex. Bench tested. Backed by 12-month warranty.

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Brisbane AU Dispatch PULL-A Genuine Pulled 12-Month Warranty Bench Tested

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    Samsung Galaxy S22 5G LCD CTC Flex Cable PULL-A GH82-27554A SM-S901B Display Flex Screen Component JPC MOBILE ACCESSORIES

    Samsung Galaxy S22 5G LCD CTC Flex Cable PULL-A GH82-27554A SM-S901B Display Flex

    $8.14