Brisbane Technical Hub

Local BQ7 Soft OLED stock at our Forest Lake counter. Walk-in pixel and touch test before fit. Full functionality test after install. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

Authenticity Guaranteed

Genuine BQ7 Soft OLED stock. Direct supply chain. Not relabelled hard OLED, IQ7 or no-name panel sold as BQ7. Every panel carries the BQ7 grade sticker.

Reliable Dispatch

Orders ship in 2-4 business days from Brisbane. Tracked dispatch on every order. Each panel is bench-tested for pixels, touch and brightness. Foam-protected dispatch box.

Hot-air station, microscope and flux work needed. The IC chip flex is desoldered from the original and reflowed onto this new assembly.

Not a DIY-friendly install. Bring the part and your iPhone to a microsoldering shop. Most repair shops charge a small bench fee for the chip transfer.

Both functions return after a successful chip transfer. The chip carries the panel calibration data iOS reads on every boot.

A microsoldering bench (hot-air station, microscope, flux) is required for the IC chip transfer.

Each OLED pixel emits its own light. Black pixels switch off completely. True blacks, infinite contrast. Matches the original Apple Super Retina XDR depth.

Full P3 wide colour gamut. 800 nits typical, 1200 nits peak HDR. HDR10 and Dolby Vision content renders with vivid highlights.

Capacitive multi-touch glass digitiser. Smooth response across the panel. No dead zones, no ghost touch.

Notch cutout matches OEM exactly (16e uses notch, NOT Dynamic Island). Transfer the original earpiece, proximity sensor and front camera flex. Face ID returns to full function.

Vendor-confirmed 12-month replacement warranty. Covers manufacturing defects on the panel and digitiser. Excludes physical damage.

Every panel is tested before dispatch. Pixels checked, touch swept, backlight verified. No dead-on-arrival units.

Spider-web or shattered glass face. Touch may still work but glass shards risk fingers.

Touch ignores input or registers ghost taps with no finger present. Digitiser layer is damaged.

Display will not light up. Phone still rings and vibrates. Panel or backlight has failed.

Black dots, vertical lines or coloured bars on the panel. Common after a hard drop on concrete.

Faint static UI elements (status bar, keyboard) ghosted on the original OLED after long use. Fresh OLED panel resets the burn clock.

Whole panel skewed green, pink or yellow after a drop or moisture intrusion. OLED driver IC or panel layer damaged. Swap restores accurate colour.

Sits at the top of the soft OLED aftermarket ladder. Tightest pixel tolerances, deepest blacks, highest peak HDR brightness.

Flexible plastic OLED substrate. Each pixel lights itself. True blacks, infinite contrast, vivid HDR colour. Same panel technology Apple uses.

Bonded multi-touch digitiser. Smooth response across the full 6.1-inch panel. No dead zones, no ghost touch.

Matches OEM iPhone 16e resolution exactly. iOS renders at native pixel density. Razor-sharp text and icons. No scaling artefacts.

Pixel-perfect notch cutout for the TrueDepth camera array. Face ID returns after sensor flex transfer.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Every panel is tested before dispatch. Pixels checked, touch swept, backlight verified. No dead-on-arrival units.

Sealed in foam-lined rigid box. Glass face protected from impact. Connectors held flat against transit damage.

Bends slightly under install pressure without cracking. Far less likely to fail during the screen swap. Hard OLED uses rigid glass and is brittle in the technician's hands.

Slimmer panel stack. Sits flush against the iPhone 16e chassis. Hard OLED is usually thicker and can press against internal flexes.

Same flexible substrate technology Apple uses on the factory iPhone 16e. Identical look-and-feel after install. Customer cannot tell the difference.

Rigid glass substrate. Snaps if bent during install or sealed without perfect alignment. Higher install scrap rate, especially on first-time fitters.

Most hard OLED replacements top out around 600 nits. This soft OLED hits 800 nits typical and 1200 nits peak HDR. Direct-sunlight readability is a real difference.

All OLED panels (factory and aftermarket) use low-frequency PWM dimming below 50 percent brightness. Some users with PWM sensitivity prefer the BQ7 Incell LCD variant instead. Honest disclosure.

Workshops with hot-air stations, microscopes and IC chip transfer expertise. Premium soft OLED repair tier with full margin recovery on the chip transfer bench fee.

Restore tradeins for resale at near-OEM resale value. Soft OLED keeps the iPhone 16e looking and feeling factory-fresh for the next buyer.

Buyers who refuse a downgrade to LCD on a flagship-tier screen. Deep blacks, P3 colour and HDR peaks the way Apple intended.

Multi-unit orders for technician benches across Brisbane, Sydney, Melbourne, Perth and regional QLD. Trade pricing on bulk soft OLED stock.

FITS — iPhone 16e (6.1″)

A3212 — International / global incl. Australia, UK, EU, Rest of World

A3408 — China Mainland, Hong Kong, Macao

A3409 — Japan

A3410 — USA, Canada, Mexico

DOES NOT FIT

iPhone 16 (6.1″) — same screen size BUT Dynamic Island cutout instead of notch. Will not fit.

iPhone 16 Plus — 6.7″, larger chassis, Dynamic Island.

iPhone 16 Pro — 6.3″, Dynamic Island, ProMotion 120Hz panel.

iPhone 16 Pro Max — 6.9″, Dynamic Island, ProMotion 120Hz panel.

iPhone 14, 13, 12 (notch) — same notch style but different chassis dimensions and connector position. Will not fit.

iPhone 15 / 15 Plus — Dynamic Island instead of notch.

iPhone SE (any generation) — entirely different LCD chassis, Touch ID home button.

Complete 6.1″ soft OLED with bonded touch digitiser. Notch cutout. Back plate pre-installed.

Steel back plate already mounted on the assembly. No extra screws or shields to transfer.

Sealed in a foam-lined rigid box. Pre-dispatch bench test card included for traceability.

Display IC chip flex (microsoldering job), earpiece speaker, proximity sensor flex and front camera flex.

Power off the iPhone 16e. Remove the two P2 pentalobe screws beside the USB-C port.

Soften the adhesive with a heat pad. Use a suction cup and opening pick from the right side.

Remove the metal cover plates. Disconnect battery first. Then disconnect the three display flex connectors.

Heat the IC flex with hot air. Lift the chip from the original screen. Reflow it onto the new BQ7 assembly under a microscope.

Carefully transfer the earpiece speaker, proximity sensor and front camera flex from the original screen.

Reconnect display flex and battery. Power on. Test display, touch, Face ID, True Tone and earpiece. Then reseal.

Apply fresh waterproof adhesive strips. Press the screen home. Refit pentalobe screws. Done.

1 to 2 business days. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

2 to 3 business days after dispatch. Tracked the whole way.

3 to 5 business days after dispatch. Foam-protected packaging on every panel.

Covers manufacturing defects. Excludes physical damage and install errors. Always test before sealing.