๐ง Professional Repair Part โ iPhone 11
Battery Adhesive Strips Replacement โ iPhone 11 โ Australia
Pull-tab adhesive strips for iPhone 11 battery replacement. Required when removing or replacing an iPhone 11 battery. Quality tested before shipping.
Compatible with iPhone 11 โ models A2111, A2223, A2221. Professional installation recommended. Dispatched from Brisbane in 2โ4 business days.
๐ง iPhone 11 Only โ
Tested Before Shipping ๐ช Pull-Tab Design ๐ฆ๐บ Brisbane Stock
โ
In Stock โ Ships 2โ4 Days ๐ง Professional Grade
๐๏ธ
Brisbane Technical Hub
Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078. Call 0480 039 913. MonโFri 9amโ5pm ยท Sat 10amโ5pm.
โ
Authenticity Guaranteed
Every part is individually tested before dispatch. Quality material and premium craftsmanship on every unit.
๐
Reliable Dispatch
Ships within 2โ4 business days from Forest Lake, Brisbane. Call 0480 039 913 for bulk orders and enquiries.
โ ๏ธ Professional Installation Highly Recommended
iPhone 11 battery replacement requires heat tools, suction cups, and precision screwdrivers. The display is held by strong perimeter adhesive. Opening it without heat risks cracking the screen.
The battery connector must be disconnected before any adhesive work. Skipping this step can cause shorts and damage to the logic board.
Not confident with iPhone internals? Call us on 0480 039 913. We can refer you to a local repair technician. Visit us at Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078.
๐ฉ Why Are New Adhesive Strips Needed?
Every iPhone 11 battery is held in place by pull-tab adhesive strips. Once used, they cannot be reapplied.
๐ Single-Use Design
Pull tabs stretch and break when used correctly. Reusing old strips leaves the battery loose inside the device.
๐ฑ Safety Requirement
A loose battery can shift inside the phone. This puts pressure on the display cables and logic board.
๐ฏ Pre-Cut Precision
These strips are cut to match the iPhone 11 battery footprint exactly. No trimming or guesswork required.
๐ Standard Repair Step
Professional repair shops always replace adhesive strips with every battery swap. It is standard practice.
๐ฅ Key Features
Quality repair consumable for iPhone 11 battery replacement.
โ๏ธ
Pre-Cut for iPhone 11
Designed to match the iPhone 11 battery footprint. No trimming needed. Fits first time, every time.
โ
Tested Before Shipping
Every part quality checked before leaving our warehouse. Dead on arrival? We replace it.
๐ช
Strong Hold
Keeps the battery firmly seated during daily use, vibration, and drops.
๐
Pull-Tab Design
Tabs allow the next battery removal to happen cleanly. No tearing or damaging the frame.
๐ฏ
Quality Material
Premium craftsmanship. High-strength adhesive that holds through heat and day-to-day stress.
๐
Professional Grade
Suited to professional repair technicians and experienced DIY repairers.
๐ฑ Compatibility โ iPhone 11 Only
Check your model number before ordering. Go to Settings โบ General โบ About โบ Model Number.
iPhone 11
Model A2111 (USA)
iPhone 11
Model A2221 (Australia / Global)
iPhone 11
Model A2223 (China)
โ Does NOT fit: iPhone 11 Pro or iPhone 11 Pro Max. Battery shapes differ between models. Always match the part to the exact device.
๐ Product Specifications
| Specification |
Details |
| Part Type |
Battery adhesive replacement strips |
| Compatible Device |
iPhone 11 only |
| Model Numbers |
A2111, A2223, A2221 |
| Strip Type |
Pull-tab adhesive strips |
| Material |
High-strength adhesive tape โ quality material |
| Reusable |
No โ single-use pull-tab design |
| Condition |
Brand new โ tested before shipping |
| Installation |
Professional installation highly recommended |
๐ฆ Package Contents
๐ง
Adhesive Strip Set
Pre-cut battery adhesive strips for iPhone 11. Pull tabs included.
๐ Note: Tools not included. Battery replacement requires a heat source, suction cups, plastic pry tools, and precision screwdrivers.
๐ Installation Overview
This is a simplified guide for experienced repairers. Professional installation is always recommended.
Step 1 โ Power Off
Shut down your iPhone 11 completely before starting. Never work on a powered device.
Step 2 โ Heat the Edges
Apply heat at 70โ80ยฐC around the display edge. This softens the perimeter seal.
Step 3 โ Open Display
Use a suction cup and pry tool to lift the screen. Be gentle with the ribbon cables.
Step 4 โ Disconnect Battery
Remove the battery connector bracket and unplug the battery before proceeding.
Step 5 โ Pull Old Tabs
Pull the old adhesive tabs at a low angle towards the bottom of the phone. Go slowly.
Step 6 โ Clean the Seat
Remove any residue with 90% isopropyl alcohol. Let it dry fully before applying new strips.
Step 7 โ Apply New Strips
Peel the backing and apply new adhesive strips to the battery. Press firmly to bond.
Step 8 โ Seat and Test
Lower the battery into position. Reconnect the connector. Test the phone before sealing the display.
๐ Australia-Wide Shipping
Ships within 2โ4 business days from Forest Lake, Brisbane. Tracked delivery Australia-wide.
-
Brisbane Metro: 1โ2 days after dispatch
-
Sydney / Melbourne: 3โ5 days after dispatch
-
Perth / Regional: 5โ8 days after dispatch
-
In-Store Pickup: Same day at Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078
Frequently Asked Questions
What are battery adhesive strips and why do I need them?
Battery adhesive strips are double-sided tape with pull tabs. They hold the iPhone 11 battery firmly inside the device.
When you remove an iPhone 11 battery, the pull tabs stretch and break. The old strips cannot be reused after that.
Fitting a new battery without replacement strips leaves it loose inside the phone. That is unsafe and unprofessional.
Can I reuse the old adhesive strips?
No. The pull tabs are designed to stretch and release in one use only. Once pulled, they lose all holding strength.
Even if the tab doesn't break, the adhesive is greatly weakened after the first removal. It won't hold the battery securely.
Always fit new strips with every battery replacement. It is a low-cost part that protects a much more expensive repair.
What happens if I don't replace the adhesive strips?
A battery without adhesive is free to move inside the iPhone. It can press against the display or logic board cables.
This can cause display problems, random restarts, or damage to the logic board over time. It is a preventable issue.
In a drop, a loose battery can shift suddenly and cause serious internal damage. Always replace the strips.
How do I remove the old adhesive pull tabs correctly?
Pull the tabs at a low angle, roughly 15 to 30 degrees. Pull towards the bottom of the phone only. Do not pull up or sideways.
Pull slowly and steadily. If a tab breaks, use a plastic pry tool to lift the battery gently. Do not use metal tools.
Warming the battery area slightly (around 40ยฐC) before pulling makes the tabs stretch more cleanly.
What tools do I need alongside this adhesive kit?
You need a heat source, suction cup, and plastic pry tools. A heat gun or heat mat works well. A non-scratch spudger is also useful.
Precision screwdrivers are required: Pentalobe P2, Tri-point Y000, and Phillips PH000. An anti-static wrist strap is recommended.
90% isopropyl alcohol cleans old residue. Tools are not included โ these strips are the adhesive component only.
Does this fit iPhone 11 Pro or iPhone 11 Pro Max?
No. These strips are cut specifically for the iPhone 11. The iPhone 11 Pro and Pro Max have different battery shapes and sizes.
Using the wrong size strips means the adhesive won't cover the battery correctly. Always match the part to the exact model.
We stock adhesive strips for other iPhone models. Call 0480 039 913 or visit us in Forest Lake to find the right part.
Will replacing the battery void my Apple warranty?
Opening the iPhone for self-repair technically voids the Apple warranty. Apple's warranty does not cover third-party repairs.
However, most iPhone 11 models are well past their 12-month warranty period. Australian Consumer Law still provides protection.
Australian Consumer Law gives you a remedy if a product is faulty. This applies no matter who did the repair.
Can I buy adhesive strips in bulk for a repair shop?
Yes. JPC Mobile supplies repair shops across Brisbane and Australia. Bulk orders are available for repair consumables.
We stock adhesive strips for many iPhone models, not just the iPhone 11. Ask us about your full parts list.
Call 0480 039 913 or visit Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078. Open MonโFri 9amโ5pm and Sat 10amโ5pm.
How is this part tested before shipping?
Each strip set is checked for correct cut dimensions and tab quality. Peel release liner integrity is also tested.
Strips that don't meet the standard are removed from stock. Only fully tested parts leave our Forest Lake warehouse.
If a part arrives defective on arrival, contact us at 0480 039 913. We will replace it without hassle.
Do I need to order a new battery as well?
These strips are the adhesive only โ no battery is included. If you need a full battery, browse our repair parts collection.
We also sell iPhone 11 LCD assemblies, charging ports, and other service parts. Call us to check current stock.
Visit Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078. Call 0480 039 913 for a full parts quote.
๐ง Complete Your iPhone 11 Repair
๐ iPhone 11 Battery
Replacement battery for iPhone 11. Use alongside these adhesive strips for a complete repair.
View Batteries
๐ฑ iPhone 11 LCD Assembly
Replacement LCD screen for iPhone 11 with complete digitizer assembly.
View Screens
๐ฉ iPhone Repair Parts
Browse our full range of iPhone service parts, screws, and repair consumables.
View All Parts
JPC Quality Seal โ Brisbane's iPhone Repair Parts Specialist
Quality iPhone repair parts tested and dispatched from Forest Lake, Brisbane. Fast delivery Australia-wide.
Questions about compatibility or bulk orders? Call or visit us. MonโFri 9amโ5pm ยท Sat 10amโ5pm.
โ
Tested Before Shipping ๐ง Professional Grade ๐ฆ๐บ Brisbane Stock ๐ Ships 2โ4 Days
๐ Shop 3a, 152 Woogaroo St, Forest Lake QLD 4078 ๐ 0480 039 913
