• Send Us a Message
    • Ir a contenido
    iPhone 16 Pro Max Proximity Ambient Light Sensor Flex Cable PULL-A OEM A3296 A3084 Dynamic Island Camera JPC MOBILE

    iPhone 16 Pro Max Proximity Ambient Light Sensor Flex Cable PULL-A OEM A3296 A3084 Dynamic Island

    $0.00 - $0.00
    $0.00
    $11.10
    $11.10 - $11.10
    $11.10
    SKU PULL-Sensor-16PM
    🔩 PULL-A OEM · ORIGINAL APPLE · 12-MONTH WARRANTY

    iPhone 16 Pro Max Proximity + Ambient Light Sensor Flex Cable – PULL-A OEM – A3296 A3084 A3295 A3297 Dynamic Island UDPS

    Original Apple proximity + ambient light sensor flex cable, pulled from a working iPhone 16 Pro Max and pre-tested before despatch. Fits all iPhone 16 Pro Max regional variants — A3296 (Australia / global), A3084 (US), A3295 (Canada / Japan / UAE) and A3297 (China / HK / Macao). Fixes screen-stays-on-during-calls, cheek-dialling, missing auto-brightness toggle, and ambient light failure on the 6.9-inch Dynamic Island display. Includes earpiece speaker contact pads and front microphone connector — Face ID components must be transferred from the original flex. Backed by a 12-month JPC Mobile warranty against component failure.

    🔩 PULL-A OEM
    📱 Dynamic Island UDPS
    ✅ Pre-Tested
    🛡️ 12-Month Warranty
    🇦🇺 Brisbane Stock

    ⚠️ CRITICAL — This Is An Advanced Repair, Read First

    The proximity sensor flex on the iPhone 16 Pro Max is integrated inside the display assembly itself — not bonded to the back panel like earlier models. Accessing it requires full display removal and careful separation of integrated layers. Mishandling damages the OLED panel.

    🔬 Deeply Embedded In Display

    Apple integrated the sensor flex into the display assembly on the 16 Pro Max. Requires full panel removal and careful layer separation. OLED damage is the #1 risk if rushed.

    📷 Face ID Components Must Be Transferred

    TrueDepth camera, IR camera and dot projector sit on your original flex. Transfer them carefully to the new flex. Damage during transfer will permanently disable Face ID.

    ✅ Try This BEFORE Opening The Phone

    A screen protector covering the Dynamic Island area is the #1 cause of proximity failure on the 16 Pro Max. Remove it completely and test with a real call. Many "broken" sensors are fixed in 30 seconds.

    This part is intended for professional repair technicians. If you are not experienced with iPhone 16 Pro Max disassembly, take the device and this part to a professional. JPC Mobile installs at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 — call 0480 039 913.

    📱 Compatibility — iPhone 16 Pro Max (6.9-inch) Only

    ✅ A3296 — AU / Global

    The Australian-market iPhone 16 Pro Max model number. Same as most international markets including UK, EU, India, Singapore.

    ✅ A3084 — United States

    US iPhone 16 Pro Max model. eSIM-only variant. Sensor flex is identical to the global model.

    ✅ A3295 — Canada / Japan / UAE

    Canada, Japan, United Arab Emirates and selected Middle Eastern markets.

    ✅ A3297 — China / HK / Macao

    Mainland China, Hong Kong and Macao iPhone 16 Pro Max. Dual physical SIM. Same sensor flex.

    Verify your model: Settings → General → About → Model Number. Australian-market iPhone 16 Pro Max almost always shows A3296.

    ❌ DOES NOT FIT — Read Before Ordering

    This sensor flex is engineered for the iPhone 16 Pro Max (6.9-inch) only. The Dynamic Island UDPS architecture is unique — even other iPhone 16-series models use a different sensor assembly. Do not order this part for any other model.

    ❌ Other iPhone 16 Series Models

    iPhone 16 Pro — 6.3-inch, A3290 / A3083, different assembly

    iPhone 16 Plus — 6.7-inch, A3293 / A3082, no Dynamic Island UDPS

    iPhone 16 — 6.1-inch, A3287 / A3081

    iPhone 16e — 6.1-inch, no Dynamic Island

    ❌ Earlier "Pro Max" Generations

    iPhone 15 Pro Max — different internal integration design

    iPhone 14 Pro Max — flex bonded to display back, not embedded

    iPhone 13 Pro Max · 12 Pro Max · 11 Pro Max — pre-Dynamic Island, separate proximity assembly

    iPhone XS Max — entirely different sensor architecture

    ❌ Other Apple Devices

    iPhone SE (any generation) — Touch ID, no Face ID, different sensor stack

    iPad Pro · iPad Air · iPad mini — different sensor assembly entirely

    Apple Watch — no proximity sensor flex of this kind

    The 16 Pro Max sensor architecture is unique to this single model. Confirm your model number before ordering — call 0480 039 913 with your A-number for confirmation.

    🔧 What This Flex Cable Assembly Contains

    The iPhone 16 Pro Max integrates multiple sensor and audio functions into a single embedded flex. Here is what this PULL-A OEM replacement covers.

    📡

    Proximity Sensor (UDPS)

    Detects when the phone is near the ear and turns the display off during calls. The 16 Pro Max uses Apple's Under-Display Proximity Sensor (UDPS) — infrared light transmits through the OLED pixels beneath the Dynamic Island.

    ☀️

    Ambient Light Sensor (ALS)

    Measures surrounding light levels and adjusts screen brightness automatically. When this fails, the Auto-Brightness toggle can disappear from Settings entirely, or the screen locks to a fixed brightness.

    🎙️

    Front Mic + Earpiece Contacts

    Earpiece speaker contact pads and the front microphone connector are integrated into this flex. Damage here affects call audio, voice clarity and FaceTime audio.

    ⚠️ Face ID components (TrueDepth camera, IR camera, dot projector) sit on the original flex. They are NOT included in this replacement — they must be transferred from your original flex to the new one during installation.

    🔩 What PULL-A Grade Means For This Part

    Part grade directly affects reliability after installation. Given how complex this repair is, using the right grade is critical — here's exactly what you're getting.

    🏆 PULL-A — What You're Getting

    Original Apple component removed from a working or lightly-used iPhone 16 Pro Max. Tested for full functionality before removal. Minimal wear. Same sensor that left the Apple factory — not a replica.

    📦 Aftermarket / "OEM Copy"

    Made to Apple's dimensions but by a third party. Proximity and ambient light sensors are particularly sensitive to component quality — calibration issues are common with aftermarket parts on the 16 Pro Max. Not what this listing sells.

    ⚠️ PULL-B / Refurbished

    Pulled from damaged devices or tested with lower standards. Higher failure risk. Given the surgery required to fit this part, anything less than PULL-A increases the chance of repeat failure significantly.

    This listing: PULL-A OEM — original Apple proximity + ambient light sensor flex assembly — pulled from a working iPhone 16 Pro Max, pre-tested, and backed by a 12-month warranty.

    🛠️ Faults This Part Fixes — Know Yours Before Ordering

    Many proximity faults on the 16 Pro Max are not actually hardware. Rule out the simple causes first.

    📞 Screen Stays On During Calls (Cheek Dialling)

    The most common symptom. The proximity sensor has failed to detect the ear, so the screen stays live during a call. The cheek then triggers buttons — muting, hanging up or dialling contacts.

    ⚡ Check first: screen protector covering the Dynamic Island is the leading cause on the 16 Pro Max.

    🖤 Screen Stays Black After Calls

    The opposite fault — sensor stays in the triggered state after the call ends. The phone thinks it's still held to the ear. Power button wakes it, but it recurs every call.

    🌓 Auto-Brightness Not Responding

    Screen brightness is fixed regardless of environment. Ambient light sensor has failed. In some cases the Auto-Brightness toggle disappears from Settings → Accessibility entirely.

    ⚡ Check first: toggle Auto-Brightness off, reboot, and back on. If toggle is missing, hardware likely needed.

    🎙️ Earpiece / Front Mic Issues

    Quiet earpiece, dead earpiece, or muffled / one-sided FaceTime audio. The earpiece contact pads and front mic connector live on this same flex assembly — replacement restores both.

    💡 Try These Before Opening The Phone — Many Repairs Are Avoided

    STEP 1

    Remove The Screen Protector

    A protector that extends over or near the Dynamic Island is the most common cause of proximity failure on the 16 Pro Max. Remove completely and test with a real call.

    STEP 2

    Toggle Auto-Brightness

    Settings → Accessibility → Display & Text Size → Auto-Brightness. Toggle off, wait 10 seconds, toggle on. Reboot the phone.

    STEP 3

    Reset All Settings

    Settings → General → Transfer or Reset iPhone → Reset → Reset All Settings. Resets software without deleting data — clears software-caused proximity faults.

    STEP 4

    Fault Persists? Hardware

    If the fault remains after all three steps, the sensor flex has failed. Order this PULL-A part and take it to a qualified technician.

    🏆 Why Buy From JPC Mobile

    🔧

    Brisbane Technical Hub

    Operated by working iPhone repair technicians out of Forest Lake, QLD. Every PULL-A flex is tested before listing. Walk-in welcome at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

    ✅

    Authenticity Guaranteed

    Genuine PULL-A — original Apple component pulled from a working iPhone 16 Pro Max and pre-tested before despatch. Not a third-party replica or aftermarket clone.

    🚚

    Reliable Dispatch

    Ships within 2–4 business days from Brisbane via tracked courier to every state and territory. Held in real Brisbane stock — no offshore drop-ship lottery.

    👥 Who Orders This Part

    Given the complexity of the 16 Pro Max sensor repair, this part is primarily for trained technicians.

    🔧 Independent Repair Shops

    The core buyer. Shops servicing 16 Pro Max screens that stay on during calls, cheek-dialling, dead earpiece, missing auto-brightness. PULL-A OEM parts deliver the reliability needed to honour repair warranties.

    ♻️ Phone Resellers & Refurbishers

    Buy 16 Pro Max units discounted because of sensor faults, repair them, resell at market rate. Proximity faults are a common reason flagship devices sell below market value.

    🏢 Insurance Repair Technicians

    Processing insured 16 Pro Max devices with water-damage or impact-related sensor failures. PULL-A OEM grade satisfies quality requirements and supports repair documentation for insurers.

    🛠️ Advanced DIY Technicians

    Experienced self-repairers who have already completed complex iPhone repairs. The 16 Pro Max sensor repair is rated advanced — only attempt it if you have completed similar level repairs before.

    📋 Full Technical Specifications

    Part GradePULL-A OEM — pulled from a working iPhone 16 Pro Max, original Apple
    Compatible DeviceApple iPhone 16 Pro Max (6.9-inch) — only
    Model NumbersA3296 (AU / global), A3084 (US), A3295 (CA / JP / UAE), A3297 (CN / HK / Macao)
    Sensor TypeUnder-Display Proximity Sensor (UDPS) + Ambient Light Sensor (ALS)
    Display Compatibility6.9-inch Super Retina XDR OLED with Dynamic Island
    Components IncludedProximity sensor + ambient light sensor + earpiece speaker contact pads + front microphone connector
    NOT IncludedTrueDepth camera, IR camera and dot projector — must be transferred from your original flex
    Face ID After RepairPreserved — IF Face ID components are transferred undamaged from the original flex
    Repair DifficultyAdvanced — flex is embedded in display assembly. Professional installation strongly recommended.
    Quality ControlFunctionally pre-tested before despatch from Brisbane
    In The Box1 × PULL-A OEM proximity + ambient light sensor flex cable assembly
    Warranty12-month JPC Mobile warranty — covers component failure under normal use

    🚚 Australia-Wide Shipping from Brisbane

    📍

    Brisbane Metro

    1–3 business days

    🏙️

    Sydney · Melbourne · Gold Coast

    3–5 business days

    🌏

    Adelaide · Perth · Hobart · Darwin

    5–8 business days

    In-store pickup available at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Pay your way — Afterpay and Klarna available at checkout.

    ❓ Frequently Asked Questions

    Will replacing this flex cable disable Face ID? +

    Not automatically — but it depends entirely on how carefully Face ID components are handled. The TrueDepth camera, IR camera and dot projector sit on the original flex and must be transferred to the replacement.

    If those components are transferred undamaged, Face ID continues to work. If damaged during removal, Face ID will be lost permanently.

    This is the key difference from the iPhone 14 Pro Max where proximity sensor replacement guaranteed Face ID loss. On the 16 Pro Max, Face ID preservation is possible — but the repair is significantly more complex and requires careful technique.

    Why is the 16 Pro Max repair harder than the 14 Pro Max? +

    On the 14 Pro Max, the proximity sensor flex sat bonded to the back of the display assembly — difficult, but a separate component. On the 16 Pro Max, the sensor flex is deeply embedded inside the display assembly itself, making it practically part of the display.

    Accessing it requires full display removal, careful separation of integrated layers and precise Face ID component transfer — all without damaging the OLED panel.

    Rated as an advanced repair. Tools, technique and prior experience with 16 Pro Max disassembly are all required.

    My screen stays on during calls — should I order this part straight away? +

    No — try the software steps first. A screen protector overlapping the Dynamic Island is the most common cause on the 16 Pro Max. Remove it completely and test with a real call before ordering anything.

    If there is no screen protector issue, go to Settings → General → Transfer or Reset → Reset All Settings. This resets software without deleting data and resolves software-caused proximity faults.

    Order the replacement part only if the fault persists after both steps above. Avoids unnecessary complex surgery.

    What is PULL-A grade and how is it different to aftermarket? +

    PULL-A means the component was removed from a working iPhone 16 Pro Max and tested for full functionality before removal. It is an original Apple part — not a third-party replica.

    Aftermarket proximity sensors are made by third-party manufacturers to Apple's dimensions. Proximity and ambient light behaviour is particularly sensitive to component quality — aftermarket parts on the 16 Pro Max have higher rates of calibration issues and reduced detection accuracy.

    For a repair this complex, PULL-A OEM grade reduces the risk of the same fault returning after surgery.

    The auto-brightness toggle has disappeared from my Settings — is this the sensor? +

    Yes — when the ambient light sensor fails completely, iOS removes the Auto-Brightness toggle from Settings → Accessibility → Display & Text Size because it detects there is no working sensor to control.

    First try: Settings → General → Reset → Reset All Settings. This has resolved the missing toggle for some users without requiring hardware replacement.

    If the toggle remains missing after a reset and a reboot, the ambient light sensor in this flex assembly has hardware-failed and needs replacement.

    Will this fit the iPhone 16 Pro (non-Max) or iPhone 15 Pro Max? +

    No. This flex cable is specific to the iPhone 16 Pro Max (6.9-inch). The 16 Pro is smaller at 6.3-inch and uses a different assembly layout.

    The iPhone 15 Pro Max has a different internal integration design — the 16 Pro Max introduced a more deeply embedded sensor architecture that is not shared with any earlier model.

    Check your model: Settings → General → About → Model Number. iPhone 16 Pro Max shows A3296, A3084, A3295 or A3297.

    What tools are needed for this repair? +

    Pentalobe screwdrivers (bottom screws), Phillips precision screwdrivers, plastic spudgers, fine-point tweezers, a heat gun or hair dryer to soften display adhesive, and suction cups or an opening pick set.

    A magnetic screw mat is essential — the 16 Pro Max uses very small screws and losing one is a common issue for less-experienced technicians.

    JPC Mobile stocks professional iPhone repair tool kits — visit the repair tools collection or ask in store at Shop 3A, Forest Lake QLD.

    Does this part come with a warranty? +

    Yes — this PULL-A OEM sensor flex cable comes with a 12-month warranty covering the part itself.

    The warranty applies to the component as supplied. It does not cover damage caused during installation. Australian Consumer Law protections also apply to all purchases from JPC Mobile.

    If the part arrives damaged or not as described, contact us at 0480 039 913 or visit Shop 3A, Forest Lake QLD.

    Is there a quicker diagnostic I can do before ordering? +

    Yes. For ambient light: open the iPhone Camera app in the dark and hold a torch near the Dynamic Island. The screen should brighten as the ambient light sensor detects the additional light. If it doesn't, the sensor is likely failed.

    For proximity: open the Phone app, call any number and hold the phone to your ear. The screen should turn off within one to two seconds. If it stays on, the proximity sensor is either blocked or failed.

    Always remove the screen protector and perform a software reset before concluding the fault is hardware.

    How long does this repair take? +

    For an experienced technician: 60–120 minutes. Time is split between display removal, careful separation of the embedded flex, Face ID component transfer and careful reassembly with fresh adhesive.

    The heat process for adhesive softening alone takes 10–15 minutes per attempt. Rushing this step is the most common cause of cracked OLED panels during sensor repairs on the 16 Pro Max.

    Post-repair verification — testing proximity, auto-brightness, earpiece audio, microphone and Face ID — adds another 10–15 minutes to confirm all functions are restored.

    Does this fit US-market (eSIM-only) and Chinese (dual-SIM) iPhone 16 Pro Max? +

    Yes. The proximity / ambient light flex is identical across all four iPhone 16 Pro Max regional variants — A3296 (AU / global), A3084 (US eSIM-only), A3295 (Canada / Japan / UAE) and A3297 (mainland China / HK / Macao dual-SIM).

    Apple varies the SIM card hardware, modem certification and band support between regions, but the proximity sensor architecture is shared. This single PULL-A part covers all four regional models.

    Browse Related Categories
    Repair Tools & Kits
    🛡️

    The JPC Mobile Quality Seal

    Held in stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Bench-tested by working iPhone repair technicians before listing. 12-month warranty on every PULL-A flex. Australia-wide shipping with tracking via reliable courier.

    🇦🇺
    Brisbane Stock
    ⚡
    2–4 Day Dispatch
    🛡️
    12-Month Warranty
    📞
    0480 039 913

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    iPhone 16 Pro Max Proximity Ambient Light Sensor Flex Cable PULL-A OEM A3296 A3084 Dynamic Island Camera JPC MOBILE

    iPhone 16 Pro Max Proximity Ambient Light Sensor Flex Cable PULL-A OEM A3296 A3084 Dynamic Island

    $11.10