QC 3.0 (Quick Charge 3.0) is a fast-charging standard by Qualcomm. It negotiates the correct voltage for your device.

Without a QC 3.0 adapter, all devices charge at 5W. With one, output jumps to 7.5W, 10W, or 15W depending on your phone.

The RX3 uses a USB-C input. You need a QC 3.0 USB-C car adapter. The adapter is not included in the box.

iPhone 8 and all later models charge at 7.5W. Apple's Qi protocol caps wireless at 7.5W on current iPhones.

This is 50% faster than standard 5W Qi charging. You will notice a real difference on long drives.

A QC 3.0 car adapter is required to reach 7.5W. Without one, iPhone charges at 5W.

Galaxy S21, S22, S23, S24, and Note series reach 10–15W with a QC 3.0 adapter.

This is the full rated speed of the RX3. It is among the fastest Qi wireless rates available today.

Older Samsung models that support standard wireless charging receive 5–10W depending on their firmware.

Yes. The RX3 charges through most TPU and plastic cases up to 3mm thick.

Metal cases, metal card holders, and PopSocket attachments block the Qi signal completely.

Remove any metal accessories before placing the phone on the charging pad.

Both are included in the box. The air vent clip is faster to install and removes without residue.

The suction base offers more placement flexibility. It works on windscreens and smooth dash surfaces.

In Australian summer, cabin temperatures can be extreme. The air vent clip places your phone in direct AC airflow.

This keeps it cooler and charging more efficiently on hot days.

Slide the clip onto a horizontal or vertical vent blade. Tighten the retention screw until secure.

Adjust the ball joint to your preferred viewing and charging angle. It stays locked in position while driving.

The clip removes without tools. It leaves no marks on your car's vent.

The RX3 uses a manual spring-loaded clamp. Open the arms, place the phone, and release.

The spring grips the phone firmly. It holds securely on rough roads and sharp turns.

To remove the phone, squeeze the side arms apart. The grip releases and the phone lifts free.

The RX3 fits phones from 4.7 to 6.9 inches. This covers nearly every modern smartphone.

iPhone 6 through iPhone 16 Pro Max all fit. Samsung Galaxy S and Note series fit. So do most Android flagships.

Phones in thick or rugged cases may approach the effective width limit sooner. Test fit before committing.

No. The RX3 uses standard Qi wireless charging. It is not MagSafe certified.

MagSafe requires Apple-specific alignment magnets that are not in the RX3 design.

The RX3 will charge MagSafe-compatible iPhones at 7.5W via the standard Qi protocol. MagSafe-lock alignment is not available.

The iQuick RX3 is covered by a 12-month warranty from JPC Mobile.

The warranty covers manufacturing defects under normal use conditions.

Call 0480 039 913 to start a warranty claim. You can also visit 152 Woogaroo St, Forest Lake QLD 4078.

Orders dispatch within 2–4 business days from our Forest Lake store via Australia Post.

Brisbane metro: 1–2 days after dispatch. Sydney and Melbourne: 3–5 days. Perth and regional: 5–8 days.

A tracking number is sent by email when your order ships. Call 0480 039 913 for urgent enquiries.