๐ PULL-A Grade โ Xbox Series X Thermal Replacement
Xbox Series X Inner Cooling Fan โ PULL-A OEM-Spec Replacement
Fixes overheating, loud fan noise & thermal shutdowns ยท Model 1882 ยท PAAD1A451SH / MF00 ยท 12V DC 4-Pin ยท High-airflow, quiet operation
โ๏ธ PULL-A High Grade ๐ฎ Series X Model 1882 ๐ Quiet Operation ๐ฆ๐บ Brisbane Stock
โ
In Stock โ Ships within 2โ4 business days ๐ฆ
JPC Mobile | Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
๐ 0480 039 913
MonโFri 9amโ5pm | Sat 10amโ5pm
๐๏ธ
Brisbane Technical Hub
Xbox repair parts stocked in Forest Lake, Brisbane. Call 0480 039 913 for part confirmation or repair quotes before ordering.
๐ก๏ธ
Authenticity Guaranteed
Genuine PULL-A grade fans โ pulled from working consoles and tested. Every unit inspected at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
๐ฆ
Reliable Dispatch
Ships within 2โ4 business days to every state and territory. Repair shops get fast, consistent console part stock from Brisbane.
๐ ๏ธ Installation Difficulty & Steps
Read this before buying. If any of this looks beyond your skill set, JPC Mobile installs it for you in-store at Forest Lake.
Difficulty
โ
โ
โ
โโ
Intermediate
Tools Needed
Torx T8 security, T6 Torx, plastic pry tools, ESD strap, thermal paste (optional refresh)
Step-by-Step Outline
1
Power off, unplug all cables, place console upright on soft cloth
2
Pop the rear vent grill (plastic pry tool)
3
Remove side casing screws (T8 security) and slide cover off
4
Locate fan above the heatsink - disconnect 4-pin power connector
5
Unscrew fan retaining screws and lift fan straight up
6
Drop in PULL-A fan - line up screws and reseat 4-pin connector
7
Reverse steps - test fan ramps up at boot before re-shelling
โ ๏ธ Important: Console heatsink may have aged paste - good time to clean and re-paste while open. Do NOT force fan blades by hand during install. Not confident? Call JPC Mobile on 0480 039 913 โ bench install starts from a flat workshop fee.
โ๏ธ PULL-A Pulled-Stock Fan vs Cheap Generic Aftermarket
Side-by-side โ what you get at JPC Mobile vs the cheap alternative.
Spec
โ
JPC Mobile
โ Cheap Alternative
Source
PULL-A - genuine Microsoft part pulled from console
Generic factory clone
Bearing Quality
Sony/Delta-spec bearings - quiet for years
Cheap sleeve bearings - rattle in months
RPM Curve Match
Matches Xbox firmware fan profile exactly
Wrong RPM curve - triggers safety shutdowns
Connector Pinout
4-pin OEM exact fit - no rewiring
5-pin or wrong pinout - solder rework needed
Console Model Tested
Xbox Series X 1882 verified
Often labelled wrong - returns common
Warranty
PULL-A 7-day DOA cover
None
๐ณ Pay your way โ Afterpay and Klarna available at checkout.
โ Frequently Asked Questions
How do I know if my Xbox Series X fan needs replacing?+
The four main signs are: an overheating error message on screen, the console shutting down randomly mid-game, loud whirring or buzzing from inside the chassis, or a grinding/rattling noise that has appeared over time. If your Series X is getting unusually hot near the rear vent even with good airflow around it, the fan is likely no longer moving enough air. First clean out any dust from the rear vent and internal heatsink โ a clogged heatsink mimics fan failure. If the problem persists after cleaning, the fan itself needs replacing.
What does PULL-A mean and is it as good as a new fan?+
PULL-A means the fan was removed from a fully working Xbox Series X โ not a damaged or broken console. Every PULL-A part is tested for correct speed, noise level, and electrical function before it is sold. A-grade is the highest pull grade โ only parts that pass all checks qualify. For a cooling fan, PULL-A is the preferred choice over generic aftermarket replacements because it is the original OEM part built to the exact spec the console was designed around. Professional repair shops across Australia use PULL-A parts for this reason.
Does this fit all Xbox Series X consoles?+
Yes โ this fan is compatible with the Xbox Series X (Model 1882). All retail Xbox Series X consoles use Model 1882. Check the sticker on the back of your console to confirm. This fan does NOT fit the Xbox Series S โ the Series S is a smaller console with a different fan design and size. If you need a Series S fan, JPC Mobile stocks that separately. Call 0480 039 913 to confirm the right part for your console before ordering.
What are the part numbers for this fan?+
The Xbox Series X internal cooling fan is identified by part numbers PAAD1A451SH and MF00. These are the same fan โ different references used by different suppliers. If you have the original fan from your console in hand, look for either of these numbers printed on the fan label. Both reference the same OEM 12V DC 4-pin cooling unit used in all Xbox Series X (Model 1882) consoles.
Is Xbox Series X fan replacement a difficult DIY repair?+
Fan replacement is one of the more accessible Xbox Series X DIY repairs โ no soldering is required. You need a Torx T8 security screwdriver to open the shell, and a Torx T6 for internal screws. The fan uses a 4-pin connector that unclips from the motherboard header. The main difficulty is careful disassembly โ the plastic shell panels can be fragile if forced. If you are confident with electronics disassembly and have the right tools, it is manageable. If not, bring it to JPC Mobile at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 for professional installation.
Should I replace the thermal paste at the same time?+
Yes โ if you are opening the console for a fan replacement, it is worth replacing the thermal paste on the CPU/GPU heatsink at the same time. After 3โ5 years of heavy use, the original thermal paste dries and loses conductivity. Dry paste means heat transfers poorly from the chip to the heatsink โ even a new fan cannot compensate for this. A fresh application of quality thermal paste plus a new fan gives the console a full thermal reset. JPC Mobile can perform this as part of a full Xbox thermal service โ call 0480 039 913 for a quote.
Will a new fan make my Xbox Series X quieter?+
Yes โ if the noise is coming from a worn or failing fan bearing. Grinding, rattling, and loud whirring are all signs of bearing wear inside the fan motor. A PULL-A replacement fan runs quietly because it comes from a working console where it was operating normally. Note: if your console is running loud because it is genuinely overheating (not just a bad fan), a new fan alone may not fully resolve the noise. Combine the fan replacement with a dust clean and fresh thermal paste for the best result.
Can I buy this for a repair shop or in bulk?+
Yes. JPC Mobile supplies repair shops and professional technicians across Australia. Xbox Series X overheating and loud fan jobs are very common โ especially on consoles that are 3+ years old. Call 0480 039 913 or visit Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 to discuss trade pricing and bulk stock. We also stock Xbox Series S fans and other Xbox repair parts.
What warranty does this PULL-A fan carry?+
PULL-A hardware parts do not carry a manufacturer warranty. DOA (Dead on Arrival) claims are accepted within 7 days of delivery. Contact JPC Mobile on 0480 039 913 with evidence that the part is non-functional on arrival. DOA does not cover damage caused during installation โ if the fan connector is broken during fitting, this is outside the claim scope. All PULL-A fans are tested before dispatch to minimise DOA risk.
How fast does JPC Mobile ship Xbox parts across Australia?+
JPC Mobile ships from Forest Lake, Brisbane within 2โ4 business days to every state and territory across Australia. Repair shops are welcome to visit us at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 for counter pickup. Call 0480 039 913 to confirm stock availability before visiting. MonโFri 9amโ5pm | Sat 10amโ5pm.
๐ JPC Mobile Quality Guarantee
Every PULL-A fan at JPC Mobile is tested before dispatch. We are a real store in Forest Lake, Brisbane โ not a dropshipper. We stand behind every part we sell.
โ
Tested PULL-A Stock
๐ฆ 2โ4 Day Dispatch
๐ Expert Phone Support
๐๏ธ Brisbane-Based Team
Questions? Call 0480 039 913 or visit us in store.
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078
