• Send Us a Message
    • Ir a contenido
    PS5 DualSense Controller Battery LIP1708 1650mAh 3.65V CFI-ZCT1W BDM-010 to BDM-060 Battery JPC MOBILE ACCESSORIES

    PS5 DualSense Controller Battery LIP1708 1650mAh 3.65V CFI-ZCT1W BDM-010 to BDM-060

    $0.00 - $0.00
    $0.00
    $18.30
    $18.30 - $18.30
    $18.30
    SKU BR-PS5
    Brand-New Replacement Cell · 12-Month Warranty

    PS5 DualSense Controller Battery — LIP1708 — 1650mAh 3.65V — CFI-ZCT1W BDM-010 to BDM-060

    Direct replacement battery for the Sony PlayStation 5 DualSense wireless controller. Fits CFI-ZCT1W standard DualSense across every region. Compatible with board revisions BDM-010, BDM-020, BDM-030, BDM-040 and BDM-060. Genuine LIP1708 spec — 1650mAh capacity at 3.65V nominal. Lithium-polymer pouch cell with built-in safety circuit. Plug-in ZH 1.25mm 3-pin JST connector — no soldering needed. Backed by a 12-month manufacturing-defect warranty. Suits repairers, console technicians, refurbishers and DIY owners. Brisbane-stocked and bench-inspected before dispatch. Australia-wide tracked shipping in 2-4 business days.

    1650mAh Capacity 3.65V Nominal Plug-In ZH JST No Soldering 12-Month Warranty
    In Stock Bench Tested Ships 2-4 Days AU

    Fixes These DualSense Battery Symptoms

    Got these PS5 controller battery problems? This cell is the fix.

    Dies Too Fast

    Run-time has dropped to one or two hours.

    Won't Turn On

    Controller is dead unless USB-C cable is plugged in.

    Shuts Off Mid-Game

    Random power-off even when the meter shows charge.

    Swollen Battery

    Touchpad lifting or shell bulging from a puffed cell.

    Won't Hold A Charge

    Charges to 100% but drops to zero within minutes.

    Slow Charge

    Takes much longer to fully charge than when new.

    Backed By A 12-Month Warranty

    Vendor-confirmed 12-month warranty against manufacturing defects. Buy with full confidence on the bench.

    Brisbane Technical Hub

    Stocked and dispatched from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Real local console parts.

    Authenticity Guaranteed

    Brand-new LIP1708 cells matched to original Sony spec. No grey-market or fake stock.

    Reliable Dispatch

    Ships in 2-4 business days from Forest Lake via Australia Post tracked. Battery-safe packaging.

    Swap-Test Install Notes Tools Needed Specifications Compatibility FAQs

    Confirm The Battery Is The Fault

    Run these quick triage checks before swapping the cell.

    • Try a known-good USB-C cable into the controller first.
    • Try a different wall charger or PS5 console USB port.
    • Hold the small reset button on the back near the screw.
    • If the controller still dies fast, the battery is the fault.
    • Check the touchpad for lifting — a sign of a swollen cell.
    • If the shell feels bulged, replace the battery immediately.
    • If charging port is loose, the issue may be the port not the cell.
    • If both port and battery are old, swap both for a full revival.

    Plug-In Install — No Soldering Required

    Installing this cell needs the controller fully opened.

    • Remove the four Phillips PH00 screws on the controller back.
    • Carefully separate the front and rear shells with a plastic spudger.
    • Disconnect the old battery JST plug before lifting the cell.
    • Peel the old battery from the shell using gentle prying motion.
    • Wear an anti-static wrist strap during the entire swap.
    • Seat the new JST plug fully — no exposed gold pins should show.
    • Difficulty rating: easy to moderate — DIY-friendly with care.
    • If unsure, book the controller in for a workshop fitting.

    Tools Needed For The Swap

    Standard console-repair tools — kits available in store.

    Phillips PH00 Driver

    For the four shell screws on the controller back.

    Plastic Spudger

    For shell separation and JST plug release.

    Plastic Pry Tool

    For lifting the old adhered battery from the shell.

    Anti-Static Wrist Strap

    For safe PCB and battery handling.

    Replacement Adhesive

    Double-sided tape to mount the new cell.

    Microfibre Cloth

    For wiping the shell free of old adhesive residue.

    Full Specifications

    Part Type
    Replacement Battery Cell
    Battery Model
    LIP1708 (also LIP-1708 / LIP1708-2J1)
    Compatible Controller
    Sony PS5 DualSense (CFI-ZCT1W)
    Board Revisions
    BDM-010 / 020 / 030 / 040 / 060
    Capacity
    1650mAh
    Voltage
    3.65V Nominal
    Energy
    6.02Wh (1650mAh × 3.65V)
    Chemistry
    Lithium-Polymer Pouch Cell
    Connector
    ZH 1.25mm 3-Pin JST Plug-In
    Soldering
    Not Required
    Safety Circuit
    Overcharge / Discharge / Heat
    Fit Type
    Direct Drop-In
    Buyer Use Case
    Repairers, Refurbishers, DIY
    Console Release
    November 2020 (Sony)
    Position
    Inside Front Shell, Centre
    Condition
    Brand-New Stock
    Quality Check
    Bench Tested Pre-Dispatch
    Quantity
    1 Battery Cell Per Order
    Packaging
    Anti-Static Sleeve, Padded Mailer
    Warranty
    12-Month Manufacturing Defect
    Dispatch
    2-4 Business Days
    Shipping
    Australia Post Tracked
    Pickup
    Forest Lake Brisbane

    Compatibility — PS5 DualSense Standard

    Fits These Models & Board Revisions

    CFI-ZCT1W BDM-010 BDM-020 BDM-030 BDM-040 BDM-060

    Fits Australian, US, UK, EU and Japanese DualSense controllers. All shell colours.

    Does NOT Fit These Controllers

    • DualSense Edge (CFI-ZCT2W) — uses the BAGP1001 cell instead.
    • DualShock 4 PS4 controller — uses the LIP1522 cell.
    • PSVR2 Sense controllers — use a different battery entirely.
    • Xbox Series X/S controllers — use AA batteries or play-and-charge.
    • Switch Pro Controller — uses an HAC-006 cell.

    Check the model number on the back of the controller before ordering.

    Brand-New LIP1708 vs Cheap Aftermarket Clone

    This Brand-New LIP1708

    Matched Sony Spec, Bench Tested

    • Full 1650mAh capacity at 3.65V from day one.
    • Lithium-polymer pouch cell with built-in safety chip.
    • Original ZH 1.25mm 3-pin JST plug seats first time.
    • 12-month warranty against manufacturing defects.
    Cheap Aftermarket Clone

    Under-Spec Generic Cell

    • Often arrives at 1200-1400mAh real capacity, not 1650.
    • Missing or weak safety circuit risks board damage.
    • Cheap JST connectors lift, bend or short on first seat.
    • Usually no warranty cover and no bench testing.

    Visit Us In Forest Lake, Brisbane

    Repair shops welcome — drop in for trade pickup or bench fitting.

    Brisbane Technical Hub
    Authenticity Guaranteed
    Reliable Dispatch

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078

    Fast Australia-Wide Shipping

    • Dispatch: Ships in 2-4 business days from Forest Lake.
    • Brisbane Metro: 1-3 business days after dispatch.
    • Sydney and Melbourne: 3-5 business days after dispatch.
    • Perth and Regional: 5-8 business days after dispatch.
    • Tracking: Australia Post tracking included on every order.
    • Pickup: Local pickup from the Forest Lake store.

    Pay your way — Afterpay and Klarna available at checkout.

    Frequently Asked Questions

    My DualSense dies after 1-2 hours — is this the fix?+

    Most likely yes — short run-time is a worn battery sign.

    First try a different USB-C cable to rule out charging issues.

    If short run-time persists, swap this cell to restore play time.

    Will this fit my PS5 controller?+

    Yes — fits all standard DualSense (CFI-ZCT1W) controllers.

    Works with board revs BDM-010, 020, 030, 040 and 060.

    Does not fit DualSense Edge (CFI-ZCT2W) or DualShock 4.

    Do I need to solder anything?+

    No — this is a true plug-in replacement cell.

    The ZH 1.25mm 3-pin JST plug seats directly into the controller.

    No soldering, no flux, no hot work required.

    My controller's touchpad is lifting — is the battery swollen?+

    Almost certainly yes — a swollen cell pushes on the touchpad.

    Stop using the controller and replace the cell immediately.

    A puffed lithium battery is a fire risk if left in service.

    How hard is the install?+

    Easy to moderate — DIY-friendly with the right tools.

    Four Phillips screws and careful shell separation are needed.

    No soldering required, but anti-static handling is essential.

    Is there a warranty on this battery?+

    Yes — 12-month warranty against manufacturing defects.

    Covers dead-on-arrival cells and early capacity failure.

    Install damage and physical damage are not covered.

    Is this a genuine Sony cell?+

    No — this is a brand-new aftermarket replacement cell.

    Built to genuine Sony LIP1708 specifications and dimensions.

    Matched capacity, voltage, connector and safety circuit.

    How long should the new battery last?+

    Expect 10-12 hours of wireless play time per full charge.

    Service life is around 300-500 full charge cycles.

    Avoid leaving the controller plugged in 24/7 to maximise life.

    Can you fit it for me?+

    Yes — bring the controller to our Forest Lake workshop.

    Address: Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.

    In-store fitting is available alongside the part purchase.

    Do you offer trade pricing for repair shops?+

    Yes — repair shops can open a trade account with us.

    Visit Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 to set up.

    Bulk LIP1708 ordering available for ongoing console repair tickets.

    Browse Related Categories
    Repair Tools Switch Replacement Parts Switch OLED Parts

    Pay your way — Afterpay and Klarna available at checkout.

    Brand-New LIP1708 · 12-Month Warranty · Bench Tested

    The JPC Mobile Quality Seal

    Every LIP1708 cell is bench tested before dispatch from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Voltage, capacity and connector seat all verified.

    Brisbane Bench Tested 12-Month Warranty Brand-New Stock

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    PS5 DualSense Controller Battery LIP1708 1650mAh 3.65V CFI-ZCT1W BDM-010 to BDM-060 Battery JPC MOBILE ACCESSORIES

    PS5 DualSense Controller Battery LIP1708 1650mAh 3.65V CFI-ZCT1W BDM-010 to BDM-060

    $18.30