BQ7 Trade-Grade Aftermarket
BQ7 Incell LCD for iPhone 11 LTPS Liquid Retina Replacement
Premium aftermarket LTPS LCD with true incell touch, COF flex and reserved IC pads. Cut for the iPhone 11 6.1-inch chassis (A2221, A2111, A2223). 650 nits brightness, 97% NTSC colour, thin OEM-matching bottom bezel. The trade-favourite grade for repair shops and refurbishers who want OEM look without the OEM price.
6.1 Liquid Retina828 1792650 nits97% NTSCIC Transfer Ready
In Stock Brisbane12-Month WarrantyShips 2-4 Days
Fits iPhone 11 ONLY (6.1-inch 2019)
Cut precisely to the iPhone 11 chassis released September 2019. Will not fit the iPhone 11 Pro (5.8-inch OLED), iPhone 11 Pro Max (6.5-inch OLED) or the externally-similar iPhone XR. Proximity sensor flex is pre-installed and the COF flex carries reserved IC pads in the OEM layout.
Device
iPhone 11 6.1-inch Liquid Retina HD replacement panel.
Apple Models
A2221, A2111, A2223 all carriers, all storage, all colours.
Resolution
828 1792 native, 326 ppi matches Apple Liquid Retina spec.
Brightness
650 nits typical bright enough for outdoor sunlight viewing.
Confirm your model: Settings General About Model Number. iPhone 11 starts with A2221, A2111 or A2223. iPhone XR (A1984/A2105/A2106/A2108) looks identical from the outside but uses a different flex layout that screen will not fit.
What BQ7 Means & Why Trade Buyers Pick It
BQ7 is the highest aftermarket grade for iPhone 11 LCDs built to OEM dimensions, OEM bezel thickness and OEM colour profile. It is the trade-favourite choice for high-volume repair shops and refurbishers across Australia.
1. LTPS LCD Technology
Low-temperature polysilicon LCD the same panel technology Apple uses in the original Liquid Retina. Faster pixel response and lower power draw than older a-Si LCD aftermarket grades.
2. True Incell Touch
Touch sensor laminated inside the display layer no air gap between glass and panel. Thinner profile, more responsive touch and richer colour saturation than on-cell aftermarket panels.
3. COF Flex Design
Chip-On-Flex layout (not COG). Driver chips sit on the flexible cable rather than the glass allowing the thin bottom bezel that matches the OEM iPhone 11 appearance.
4. Reserved IC Pads
OEM-layout IC chip pads pre-built into the COF flex. Built to accept the touch IC and backlight IC chips transferred from your old screen keeps True Tone working.
5. 650 nits / 97% NTSC
Punches above the price point 650 nits typical brightness exceeds Apple's 625 nit spec. 97% NTSC colour gamut for accurate, vibrant photo and video reproduction.
6. Bench Tested Per Batch
Every panel bench-tested for touch accuracy, dead pixels, backlight uniformity and colour fidelity before being packed and dispatched from our Forest Lake counter.
IC Chip Transfer Required for True Tone
This BQ7 panel ships with reserved IC pads on the COF flex the chips themselves must be transferred from your original broken screen. Moving the touch IC and backlight IC across keeps True Tone working and prevents iOS from showing the "Unknown Part" warning in Settings.
-
What to transfer: Touch IC chip and backlight IC chip from the COF flex of your old screen onto the reserved pads on this BQ7 panel.
-
Why it matters: The touch IC carries the True Tone calibration data paired to your iPhone's logic board. Without the transfer, True Tone disappears from iOS settings.
-
Face ID: Unaffected by the screen swap. Face ID lives in the TrueDepth camera assembly above the screen that module stays in the phone.
-
Tooling needed: Hot air station (350-400C), microscope or magnification, soldering tweezers, low-temp solder, flux. Microsoldering skill required.
-
Skill level: Advanced recommended for experienced repair technicians. First-time DIYers should book a pro install.
Pro install: walk in to our Forest Lake counter for a same-week appointment. Our technicians complete the IC chip transfer and full screen install in-house.
Pay your wayAfterpay and Klarna available at checkout. Order today, receive in 2-4 business days, pay over time.
Frequently Asked Questions
What is BQ7 grade and how does it compare to OEM?+
BQ7 is the top aftermarket grade for iPhone 11 LCDs. Built with LTPS panel technology the same panel type Apple uses in the original Liquid Retina display. True incell touch (sensor laminated inside the display layer), COF flex for thin OEM-matching bottom bezel, and reserved IC pads for True Tone preservation. Brightness 650 nits, colour gamut 97% NTSC. The trade-favourite choice for repair shops who want OEM look and feel without the OEM price.
What is the difference between incell and on-cell?+
True incell laminates the touch sensor inside the display layer no air gap between the front glass and the LCD. The result is a thinner profile, more responsive touch, and richer colour saturation. On-cell panels stack the touch sensor on top of the LCD with a small gap these can feel less responsive and show parallax under bright light. BQ7 is true incell, matching the OEM iPhone 11 construction.
What is IC chip transfer and why does it matter?+
IC chip transfer means moving the small touch IC and backlight IC chips from the COF flex of your old broken screen onto the reserved IC pads of this BQ7 panel. The touch IC carries the True Tone calibration data paired to your iPhone's logic board. Without the transfer, True Tone disappears from iOS settings and you may see an "Unknown Part" warning. The transfer requires a hot air station, microscope and microsoldering skill.
Will Face ID still work after I install this?+
Yes. Face ID is driven by the TrueDepth camera assembly above the screen that module stays inside the phone during a screen swap. Replacing the LCD does not affect Face ID. If Face ID was already broken before the screen damage, that is a separate TrueDepth fault and a screen swap will not bring it back.
How is BQ7 different from a refurbished pulled-OEM screen?+
A refurbished screen uses the original Apple LCD layer with new glass so colour profile and viewing angles match the factory iPhone exactly. BQ7 is brand-new aftermarket built by a third-party manufacturer using the same LTPS panel technology and OEM dimensions. Refurbished is the premium choice when buyers want the screen to feel identical to the factory display. BQ7 is the choice when trade pricing matters and OEM look and feel is enough.
Will this fit my iPhone XR or iPhone 11 Pro?+
No. This screen fits iPhone 11 only (model numbers A2221, A2111, A2223). The iPhone XR is the same 6.1-inch size and looks identical externally, but uses a different flex cable layout XR screens will not fit iPhone 11 and vice versa. The iPhone 11 Pro (5.8-inch) and 11 Pro Max (6.5-inch) use OLED displays and need different replacement parts entirely. Always confirm your model number in Settings before ordering.
What is included and what do I need to transfer?+
Included: BQ7 incell LTPS LCD assembly, aftermarket frame, sensor brackets, ear speaker mesh and proximity sensor flex pre-installed. Not included: earpiece speaker, IC chips, front camera, screws or adhesive strips. Move those across from your broken screen. The IC chip transfer is the most critical step it preserves True Tone and prevents iOS warnings.
Is this suitable for first-time DIY repair?+
No the IC chip transfer step requires microsoldering skill. You will need a hot air station, microscope or magnification, soldering tweezers, low-temp solder and flux. If microsoldering is outside your comfort zone, walk in to our Forest Lake counter and our in-house technicians will install the screen and complete the IC transfer for you. First-time DIY techs without microsoldering experience should look for plug-and-play aftermarket alternatives instead.
What does the 12-month warranty cover?+
The 12-month warranty covers manufacturing defects: dead pixels present on arrival, backlight failure under normal use, touch becoming unresponsive without physical impact, and panel separation from the frame. Not covered: drops, cracks, water damage, IC chip damage during transfer, installation errors, scratches or pressure marks. Bring the screen, your order number and a description of the fault to our Forest Lake counter.
How fast does it ship within Australia?+
Orders ship in 2 to 4 business days from our Forest Lake counter. Brisbane metro buyers usually receive within a week. Sydney and Melbourne in 4 to 7 days after dispatch. Perth and regional in 6 to 9 days. Tracked dispatch on every order. Protective foam packaging included. Click and collect from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078.
Sold Australia Wide
JPC Mobile Quality Seal
BQ7 incell LTPS LCD for iPhone 11 premium aftermarket grade with COF flex, 650 nits brightness, 97% NTSC colour and reserved IC pads ready for True Tone preservation. Backed by a 12-month warranty. Walk-in trade collection and pro IC transfer install at our Forest Lake counter.
Forest Lake QLD Stock12-Month Warranty2-4 Day Dispatch
Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 Mon-Fri 9am-5pm Sat 10am-5pm
