• Send Us a Message
    • Ir a contenido
    Xbox Series X HDMI 2.1 Port Replacement Connector 4K 120Hz Console Repair Part PULL-A 1882 HDMI Port JPC MOBILE ACCESSORIES

    Xbox Series X HDMI 2.1 Port Replacement Connector 4K 120Hz Console Repair Part PULL-A 1882

    $0.00 - $0.00
    $0.00
    $15.20
    $15.20 - $15.20
    $15.20
    SKU Pull-HDMIport-XSeriesX
    PULL-A Grade · Xbox Series X · HDMI 2.1 · Model 1882 · 4K 120Hz · Micro-Solder Repair Part

    Xbox Series X HDMI 2.1 Port Replacement Connector for 4K 120Hz Output (PULL-A Donor 1882)

    Genuine PULL-A grade HDMI 2.1 port connector for Xbox Series X. Fixes no signal, black screen and intermittent video output. Restores full 4K at 120Hz HDMI output after install. Pulled from a working Xbox Series X 1882 donor console. Matches Microsoft factory pin layout and surface-mount footprint.

    Master-level micro-soldering repair. PULL-A grade carries 7-day dead-on-arrival cover only. Visual pin check at Forest Lake before dispatch.

    Fitment Check Inside the Pack PULL-A Grade Micro-Solder Repair Full Specs FAQs

    Brisbane Technical Hub

    Stocked at our Forest Lake repair workshop. The same PULL-A ports our own console techs use on bench rebuilds. Bench-checked before any sale.

    Authenticity Guaranteed

    Genuine PULL-A donor port from a working Xbox Series X 1882 console. Real Microsoft pin pitch. Real factory footprint. No clones.

    Reliable Dispatch

    Standard 2-4 business day ship Australia wide. Anti-static wrap and foam packaging. Tracked Australia Post or courier on every order.

    Fits Xbox Series X (1882) ONLY · Does NOT Fit Series S, Xbox One, PS5 or Switch

    FITS — Xbox Series X (Standard 1882)

    • Xbox Series X — model number 1882
    • Standard 4K HDR gaming console released November 2020
    • HDMI 2.1 output port replacement
    • 19-pin Type A surface-mount connector
    • Restores 4K at 120Hz, VRR, ALLM, HDR10 and Dolby Vision
    • Console label confirms Xbox Series X and model 1882

    DOES NOT FIT (Avoid Wrong Purchase)

    • Xbox Series S — smaller chassis. Different HDMI port assembly.
    • Xbox One — uses HDMI 2.0. Different connector pitch.
    • Xbox One S — uses HDMI 2.0. Different connector pitch.
    • Xbox One X — uses HDMI 2.0. Different connector pitch.
    • PlayStation 5 — different chassis and footprint layout.
    • Nintendo Switch — HDMI is on the dock only. Different part.
    • Xbox Series X 1883 (1TB Disc Black 2024) — verify board revision before fitting.
    Confirm your Xbox console model before ordering.

    Look at the label on the rear vent of the console. The model number is printed there. Match the model code to the FITS list above. Then check the broken port for HDMI 2.1 markings. Wrong console means the part will not fit the board.

    What Comes In The Pack

    Just one part. Anti-static wrapped and bench-checked before dispatch.

    HDMI 2.1 Port Connector

    Genuine PULL-A surface-mount port. Matches Microsoft factory pinout.

    19-Pin Type A Layout

    Standard HDMI Type A footprint. 19 pins for full HDMI 2.1 spec.

    Gold-Plated Contacts

    Gold-plated contact pins on copper alloy frame. Low signal loss at 4K 120Hz.

    Full EMI Shielding

    Metal shielding wraps the connector. Keeps the 48 Gbps signal clean.

    Anti-Static Wrap

    Each port is wrapped in anti-static foam. Pin tips stay protected in transit.

    Visual Pin Check

    Bench-checked for bent pins, broken legs and oxidation. Confirmed before dispatch.

    PULL-A Donor Source

    Pulled from working Xbox Series X 1882 donor consoles. Real Microsoft origin.

    Not Included in the Pack

    No solder, no flux, no tools. The motherboard is your existing console board.

    Each port is bench-checked before dispatch. Pin pitch and footprint both confirmed.

    Confirmed for the standard Xbox Series X (model 1882). Verify with the label on the rear vent.

    PULL-A Grade Honesty Disclosure

    PULL-A means pulled from a working donor Xbox Series X. Honestly labelled. Not new-OEM stock.

    Where the port comes from

    Donor consoles come from insurance write-off claims, trade-ins and refurb stock. The boards are stripped clean.

    What Grade A means

    No bent pins. No broken legs. No oxidation on the contact pads. Pin pitch holds true.

    Why Microsoft does not sell this

    Microsoft does not sell HDMI ports as service parts. PULL-A donor stock is the only genuine route.

    No manufacturer warranty

    No Microsoft warranty on a donor port. JPC covers 7-day dead-on-arrival. Bench-test on arrival.

    Genuine vs aftermarket clone

    PULL-A keeps real Microsoft pin pitch and contact gold plating. Aftermarket clones often drift the pitch.

    Honest grade label

    We never sell PULL-A as new-OEM. PULL-A is donor stock from a working console. Honest label every time.

    Master-Level Micro-Soldering Repair (Not Plug-and-Play)

    A HDMI port reflow is the highest-skill console repair. Master-level work only.

    Step 1 · Open the Xbox

    Use Torx drivers to remove the back vent and outer shell. Slow and careful.

    Step 2 · Discharge and ESD

    Ground yourself with an ESD wrist strap. Discharge any static off the board.

    Step 3 · Hot Air Removal

    Set the hot air station to safe reflow temperature. Slowly lift the broken port.

    Step 4 · Clean the Pads

    Wick away old solder. Clean every pad with flux. Confirm no lifted pads.

    Step 5 · Place the New Port

    Tin each pad with fresh solder. Align the new PULL-A port over the footprint.

    Step 6 · Reflow and Inspect

    Reflow the joints with hot air. Inspect every pin under a microscope.

    Step 7 · Reassemble and Test

    Refit the shell and screws. Power on and check the HDMI 2.1 output.

    Tools and Skill Required

    Hot air station, fine-tip iron, microscope, ESD mat. Master-level skill needed.

    Damage from a lifted pad is not covered. Bring the console into the Forest Lake workshop if you want bench help.

    Reasons to Stock the Xbox Series X HDMI 2.1 Port

    Real-world reasons console repair benches need this part on the shelf.

    HDMI port snap from cord trip

    Toddlers, cords and tripping pets all snap the HDMI port off the board.

    Drop damage cracks the port

    A drop on the back of the Xbox often cracks the HDMI port.

    Console resale uplift

    A working HDMI port lifts the resale price of any Xbox Series X.

    Cheaper than mainboard swap

    A port replacement is far cheaper than a full mainboard swap.

    Restores 4K 120Hz output

    Restores the full 4K at 120Hz HDMI 2.1 output after install.

    Insurance write-off rebuilds

    Insurance assessors approve port repair on minor cosmetic Xbox claims.

    Built for Every Xbox Repair Workflow in Australia

    Console Repair Shops

    Broken HDMI ports are a top-three Xbox repair callout. Stock the right pin layout.

    Micro-Solder Specialists

    Hot air rework benches need steady HDMI 2.1 port stock. PULL-A keeps the Microsoft factory spec true.

    Xbox Owners with Broken HDMI Port

    Got the tools and the steady hand? PULL-A is the same connector Microsoft fitted.

    Insurance Assessment Shops

    Drop and water claims often kill the HDMI port. PULL-A is the standard repair input.

    eBay AU Console Flippers

    Broken-port Xbox Series X consoles flip back to working stock. Resale value goes up.

    Refurb and Re-Sell Operations

    Trade-in Xbox Series X units often have damaged HDMI ports. Quick fix lifts trade value.

    Trainee Micro-Solder Technicians

    TAFE and private repair-school students learn HDMI port reflow on a real PULL-A part.

    Game Shop Trade-In Operations

    Trade-in counters reject Xbox consoles with broken HDMI ports. Stock the part to fix the trade.

    Multi-Brand Console Workshops

    Sit this PULL-A port next to your PS5 and Switch repair stock. One supplier covers them all.

    Forest Lake Walk-In Customers

    Walk in to Shop 3A, 152 Woogaroo St. Pick up the port. Book a microsolder install on the spot.

    PULL-A Genuine Donor Port vs Cheap Aftermarket Clone

    PULL-A Genuine Microsoft-Spec Donor Port

    • Real Microsoft factory pin layout intact.
    • Gold-plated 19-pin HDMI Type A contacts.
    • Pulled from working Xbox Series X 1882 donor consoles.
    • Surface-mount footprint matches the original board layout.
    • Visual pin check at Forest Lake before dispatch.
    • Restores HDMI 2.1 spec — 4K 120Hz, VRR, ALLM, HDR.

    Cheap Aftermarket Clone Port

    • Reproduction port. Pin pitch often slightly off.
    • Inconsistent solderability. Cold joints on multiple pins.
    • Cheap nickel contacts. Higher signal loss at 4K 120Hz.
    • Loose footprint match. Pads can lift on first reflow.
    • No bench inspection. Shipped from offshore in bulk.
    • Failure rate high in the first month of use.

    Full Technical Specifications

    Part Type

    HDMI 2.1 surface-mount Type A port connector

    Grade

    PULL-A — pulled from working Xbox Series X 1882 donor

    Compatible Console

    Xbox Series X model 1882 only — replaces broken HDMI port

    Not Compatible

    Xbox Series S, Xbox One, Xbox One S, Xbox One X, PS5, Switch

    HDMI Standard

    HDMI 2.1 — full Microsoft factory specification

    Bandwidth

    48 Gbps maximum bandwidth across the connector pins

    Max Resolution

    4K at 120Hz native, 8K at 60Hz supported

    VRR Support

    Variable Refresh Rate supported after a successful install

    ALLM Support

    Auto Low Latency Mode supported after install

    HDR Support

    HDR10 and Dolby Vision both restored after install

    Pin Count

    19 pins — HDMI Type A connector

    Footprint

    Surface-mount footprint matches the Microsoft factory board layout

    Connector Material

    Gold-plated contacts on a copper alloy frame

    EMI Shielding

    Full metal EMI shielding for clean 4K 120Hz signal

    Install Method

    Hot air rework station and fine-tip soldering iron

    Installer Skill Level

    Master-level micro-solder — not a beginner repair

    Estimated Bench Time

    1-2 hours bench time for experienced microsolder tech

    Tools Required

    Hot air station, fine-tip iron, flux, solder paste, microscope

    Parts NOT Included

    Solder, flux, motherboard, tools — all sourced separately

    Bench Inspection Pre-Dispatch

    Visual pin check, pitch check, footprint check pre-dispatch

    Stock Location

    Forest Lake QLD workshop — Brisbane technical hub

    Dispatch Window

    2-4 business days from order to ship

    Warranty

    PULL-A donor — 7-day dead-on-arrival cover only (no manufacturer warranty)

    In the Box

    1 x HDMI 2.1 port connector — anti-static wrapped

    Important Install & Safety Note

    Discharge any static before opening the Xbox. Wear an ESD wrist strap throughout the repair. Pre-heat the board to safe reflow temperature. Lift a pad and the motherboard is finished.

    Pair this port with a fresh thermal repaste if you are already inside the console. Damage from incorrect install is not covered by the 7-day cover.

    Browse Related Categories

    Repair Tools and Equipment

    Xbox Series X HDMI 2.1 Port — Frequently Asked Questions

    Will this fit my Xbox Series X?+
    It fits the standard Xbox Series X model 1882. Look at the label on the rear vent of the console. The model number is printed there. It does NOT fit the smaller Xbox Series S. The Series S uses a different HDMI port assembly.
    Does this fit Xbox Series S?+
    No. The Xbox Series S has a different chassis layout. It uses a different HDMI port footprint. Buy the Xbox Series S HDMI port instead. Wrong console means the part will not fit the board.
    Does this fit older Xbox One consoles?+
    No. Older Xbox One, Xbox One S and Xbox One X consoles use HDMI 2.0. The connector pin layout and pitch are different. The 4K 120Hz HDMI 2.1 port will not fit. Use the correct HDMI 2.0 part for an Xbox One repair.
    Can I install this myself?+
    Only if you are a master-level microsolder tech. The repair needs hot air rework and fine-tip soldering. A microscope is strongly recommended for clean joints. Bench time is 1 to 2 hours. Lift one pad and the motherboard is dead. Bring the console to our Forest Lake workshop if you want bench help.
    What tools do I need to install it?+
    Hot air rework station with adjustable temperature. Fine-tip soldering iron with chisel tip. Quality flux and solder paste. Microscope or magnifier for pin alignment. ESD safe work mat. Plastic spudgers and Torx driver kit to open the Xbox.
    Does this restore 4K 120Hz output?+
    Yes. After a successful install, the full HDMI 2.1 output returns. That covers 4K at 120Hz, VRR and ALLM. HDR10 and Dolby Vision both work again. Bench-test the console on an HDMI 2.1 TV to confirm.
    What does PULL-A grade mean?+
    PULL-A means pulled from a working donor Xbox Series X. The port worked on the donor before removal. Grade A means clean pins, no bent legs, no oxidation. We never sell PULL-A as new-OEM Microsoft stock. Honestly labelled, every time.
    Is there a warranty on the port?+
    Microsoft does not sell HDMI ports as a service part. There is no manufacturer warranty on a donor port. We cover dead-on-arrival cases for 7 days from delivery. That covers bent pins, broken legs or dead pins on arrival. Bench-test the port before any soldering.
    What if I lift a pad during install?+
    A lifted pad usually means the motherboard is dead. Pad jumpering is possible but very advanced. Most repair shops scrap the board after a serious lift. The 7-day DOA cover does not include install damage. Hire a microsolder pro if you are not sure.
    How fast does it ship and can I collect from the workshop?+
    Standard 2-4 business days from our Forest Lake QLD workshop. We ship tracked Australia Post or courier. Brisbane Metro and Gold Coast addresses often land next day. Collection is welcome at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Pay your way — Afterpay and Klarna available at checkout.

    The JPC Mobile Quality Seal

    Genuine PULL-A HDMI 2.1 port connector for Xbox Series X. Fits the standard Xbox Series X model 1882. Pulled from a working donor console with a clean factory pin layout. Gold-plated 19-pin Type A connector with full EMI shielding. Restores 4K at 120Hz HDMI 2.1 output after install. Includes VRR, ALLM, HDR10 and Dolby Vision support. Bench-checked at our Forest Lake workshop before dispatch. Visual pin check, pitch check and footprint check on every port. PULL-A donor with 7-day dead-on-arrival cover only. Visit us at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Brisbane technical hub. Standard 2-4 business day Australia ship.

    Forest Lake Stock Bench Inspected Sold Australia Wide 2-4 Day Dispatch

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    Xbox Series X HDMI 2.1 Port Replacement Connector 4K 120Hz Console Repair Part PULL-A 1882 HDMI Port JPC MOBILE ACCESSORIES

    Xbox Series X HDMI 2.1 Port Replacement Connector 4K 120Hz Console Repair Part PULL-A 1882

    $15.20