• Send Us a Message
    • Ir a contenido
    Kinglas Tempered Glass Screen Protector | Samsung Galaxy S23 Ultra | 9H Asahi Edge-Adhesive Curved Full Coverage Protector

    Kinglas Tempered Glass Screen Protector | Samsung Galaxy S23 Ultra | 9H Asahi Edge-Adhesive Curved

    Agotado
    $0.00 - $0.00
    $0.00
    $15.00
    $15.00 - $15.00
    $15.00
    SKU KG9H-S23U-LOT1
    💎 9H Asahi · 3D Edge-Adhesive · S Pen Ready

    Samsung Galaxy S23 Ultra Kinglas 9H Asahi Tempered Glass Screen Protector

    Premium Japan Asahi A+ glass with 3D edge-adhesive design for the curved S23 Ultra display. Works with the ultrasonic fingerprint sensor and S Pen. 92%+ light transmittance. Bubble-free perimeter install — no UV lamp, no liquid glue.

    🇯🇵 Japan Asahi A+ 💎 9H Hardness 📐 3D Edge-Adhesive 👆 S Pen Ready 🔓 Fingerprint Friendly
    ✅ In Stock 📦 Ships 2-4 Days
    Fitment Asahi Glass Edge-Adhesive Protection Install Specs Does NOT Fit FAQs

    📍 Brisbane Technical Hub

    Local stock at our Forest Lake counter. Walk-in fitting available — we install your protector while you wait. Open Mon-Sat.

    ✅ Authenticity Guaranteed

    Genuine Kinglas premium-grade glass cut from Japan Asahi (AGC) sheet. Not a generic e-marketplace knock-off.

    📦 Reliable Dispatch

    Orders ship in 2-4 business days with Australia Post tracking. Combined shipping on multi-pack orders for repair shops.

    Fits Samsung Galaxy S23 Ultra ONLY (SM-S918)

    Cut and curved precisely to the S23 Ultra display geometry. The S23 Ultra has a curved-edge OLED panel — generic flat 2.5D protectors will not stick to the edges. This Kinglas protector is shaped for the exact curve, with a pre-cut earpiece slot and front-camera relief.

    📱 Galaxy S23 Ultra

    Model SM-S918, 6.8-inch QHD+ Dynamic AMOLED 2X, curved edges, 1Hz-120Hz adaptive refresh.

    🔓 Ultrasonic Fingerprint

    Edge-only adhesive leaves the centre clear. The Qualcomm 3D Sonic sensor reads through perfectly.

    ✏️ S Pen Compatible

    Full S Pen pressure sensitivity, palm rejection and tilt — protector adds no lag.

    📞 Pre-Cut Earpiece

    Earpiece slot and front-camera area pre-cut — no dust trap, full speaker output.

    Japan Asahi A+ Glass — The Premium Tier

    Asahi (AGC Inc., Japan) is the world reference for tempered display glass. Apple, Samsung and Google all use Asahi-supplied substrate on their flagship handsets. The Kinglas protector is cut from genuine Asahi A+ sheet — the highest of three commercial grades. The result is true 9H surface hardness and crystal-clear 92%+ light transmittance.

    🇯🇵 Japan Asahi (AGC)

    A+ grade premium glass. Same material family as flagship phone displays.

    💎 9H Surface Hardness

    Mohs 9H — resists scratches from keys, coins and sand grit.

    ✨ 92%+ Clarity

    No tint shift on the AMOLED. True blacks and full colour gamut preserved.

    👆 0.33mm Thin Glass

    Original-feel touch sensitivity. Sits flush under most cases.

    🛡️ AF Plasma Coating

    Oleophobic anti-fingerprint layer. Wipes clean with a microfibre cloth.

    🔁 3000+ Friction Tested

    Coating durability tested through 3000+ wipe cycles before degradation.

    3D Edge-Adhesive Technology — Built For Curved Displays

    Standard flat protectors use full-back adhesive. On a curved display they trap bubbles along the bend. UV-glue protectors solve this with liquid glue and a UV lamp — but the install is messy and risks seeping. Edge-adhesive sits in the middle: glue runs around the perimeter only, the centre floats above the screen. The result is a clean, fast install with no bubbles at the curve and no liquid mess.

    💧 No Liquid Glue Required

    No syringe, no UV lamp, no curing wait. Peel and stick — done in two minutes.

    🫧 No Curve Bubbles

    The perimeter glue holds firm to the curved bezel. Centre lifts cleanly off the screen.

    🔓 Sensor-Friendly

    No glue layer over the fingerprint area. Ultrasonic readings stay accurate.

    🌡️ Arc-Edge 60-70°C Finish

    Edges polished at 60-70 degrees so the glass meets the bezel cleanly without lifting.

    Complete Screen Protection

    🔪 Anti-Scratch (9H)

    Resists daily scratches from keys and coins in your pocket or bag.

    💥 Anti-Shatter

    Glass holds together even if struck — no flying shards on impact.

    👆 Anti-Fingerprint

    Oleophobic plasma coating repels skin oil. Wipes clean in seconds.

    👁️ Anti-Glare Surface

    Reduces reflection in direct sunlight — easier outdoor reading.

    💧 Liquid-Repel Coating

    Water beads off the surface. Sweat, rain and splashes wipe straight off.

    🦠 Antimicrobial Surface

    Smooth coating leaves no pores for bacteria to settle and breed.

    Install In 2 Minutes — No Tools, No UV Lamp

    Everything you need is in the box. Wipe the screen, line up the protector, peel the backing and press the perimeter. Edge-adhesive design means no air bubbles trapped in the curve. If you prefer hands-on help, drop in to our Forest Lake counter and we'll fit it for you while you wait.

    1️⃣ Clean The Screen

    Use the alcohol swab, then the microfibre cloth. Lift any dust with the included tape.

    2️⃣ Align The Protector

    Match the earpiece slot to the speaker. Hover the protector before you stick.

    3️⃣ Peel & Drop

    Peel the backing slowly. Drop the protector down — the edge glue takes from there.

    4️⃣ Press The Edges

    Press around the perimeter for 30 seconds. Curve adhesion locks in within 24 hours.

    📦 In the box: 1× Kinglas Asahi tempered glass protector, 1× microfibre cloth, 1× alcohol swab, 1× dust-removal sticker, 1× install guide.

    Full Technical Specifications

    Brand
    Kinglas
    Compatible Device
    Galaxy S23 Ultra (SM-S918)
    Glass Material
    Japan Asahi A+ (AGC)
    Surface Hardness
    9H Mohs
    Glass Thickness
    0.33 mm
    Adhesive Layer
    0.27 mm Clear AB Glue
    Adhesive Pattern
    3D Edge-Adhesive (Perimeter)
    Light Transmittance
    ≥ 92%
    Coating
    AF Plasma Oleophobic
    Friction Durability
    3000+ Cycles
    Edge Finish
    Arc Edge 60-70°C
    Earpiece Cutout
    Pre-Cut
    Fingerprint Sensor
    Ultrasonic Compatible
    S Pen
    Full Pressure Support

    ⚠️ Does NOT Fit — Read Before Ordering

    Cut for the S23 Ultra display geometry only. Buying the wrong protector wastes time. Quick guide to other Galaxy models below.

    ❌ Galaxy S22 Ultra

    Different curve radius and earpiece position. Use the S22 Ultra-specific protector.

    ❌ Galaxy S24 Ultra / S25 Ultra

    FLAT display. Needs flat 2.5D glass — edge-adhesive curved glass will not sit right.

    ❌ Galaxy S23 / S23 Plus

    Smaller flat displays. Use the S23 or S23+ flat protector instead.

    ❌ Note 20 Ultra

    Different aspect ratio and front-camera placement. Not compatible.

    ❌ Galaxy S21 Ultra

    Curve geometry differs. The S21 Ultra needs a UV liquid-glue protector for proper edge bond.

    ❌ Any Galaxy Tab

    Tablet displays are flat and far larger. Use a tablet-specific protector.

    💳 Pay your way — Afterpay and Klarna available at checkout. Order today, receive in 2-4 business days, pay over time.

    Browse Related Categories

    Samsung Screen Protectors S Series Screen Protectors Samsung Phone Cases All Kinglas

    Frequently Asked Questions

    Will it work with my ultrasonic fingerprint sensor?+
    Yes. The S23 Ultra uses a Qualcomm 3D Sonic ultrasonic sensor. Edge-adhesive design leaves the centre of the protector free of glue. The sensor reads through the glass with no enrolment changes. If a fingerprint scan ever feels slow, re-enrol the print once with the protector fitted.
    Does the S Pen still work properly?+
    Yes. The 0.33mm glass adds no measurable lag. Full S Pen pressure sensitivity, palm rejection and tilt detection all work as normal. Note-taking and Air Command gestures remain accurate.
    What is the difference between this and the UV liquid-glue protector?+
    Both work for the curved S23 Ultra display. UV liquid glue uses full-back adhesive cured under a UV lamp — the strongest possible bond, but the install is messy and risks glue seeping into the speaker. Edge-adhesive uses perimeter-only glue with the centre floating above the screen — much faster install, no liquid, no UV kit, fully sensor-safe. Pick edge-adhesive if you want easy install. Pick UV glue if you want the strongest possible bond.
    Will it fit my S22 Ultra, S24 Ultra or S25 Ultra?+
    No. This is cut for the S23 Ultra only. The S22 Ultra has a different curve radius. The S24 Ultra and S25 Ultra both moved to a flat display — they need a flat 2.5D glass instead. Buying the wrong size means the cutouts will not line up.
    Does it fit inside a case?+
    Yes with most slim and standard cases. Some heavy-duty rugged cases with deep raised lips may catch the protector edges and cause lifting over time. If you use a Spigen Tough Armor or similar, check the case lip clearance before fitting.
    How easy is the install?+
    Very easy. Clean the screen, line up the protector to the earpiece slot, peel the backing and drop it on. Press around the perimeter for 30 seconds. The whole job takes about two minutes. No UV lamp, no glue, no curing wait.
    Can you fit it for me at the store?+
    Yes. Bring your S23 Ultra to our Forest Lake counter at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. We'll fit the protector for you while you wait. Open Mon-Fri 9am-5pm and Sat 10am-5pm.
    Will it dim the screen or change colours?+
    No. Light transmittance is 92% or higher. The Dynamic AMOLED 2X display keeps its true blacks, full colour range and full peak brightness. Most users cannot tell the protector is there once it is fitted.
    What if it cracks?+
    Replace it. The protector is the sacrificial layer — its job is to take the hit so the actual S23 Ultra display does not. Order a replacement and fit it in two minutes. The original screen underneath stays safe.
    How fast does it ship within Australia?+
    Orders ship in 2 to 4 business days from our Forest Lake counter. Brisbane metro buyers usually receive within a week. Sydney and Melbourne in 4 to 7 days after dispatch. Perth and regional in 6 to 9 days. Tracking included.
    ⭐ Sold Australia Wide

    🛡️ JPC Mobile Quality Seal

    Genuine Kinglas premium-grade Asahi tempered glass. Cut for the curved S23 Ultra display. Walk-in fitting available at our Forest Lake counter.

    📍 Forest Lake QLD Stock 🛠️ Walk-In Fitting 📦 2-4 Day Dispatch

    Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 · Mon-Fri 9am-5pm · Sat 10am-5pm

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    Kinglas Tempered Glass Screen Protector | Samsung Galaxy S23 Ultra | 9H Asahi Edge-Adhesive Curved Full Coverage Protector

    Kinglas Tempered Glass Screen Protector | Samsung Galaxy S23 Ultra | 9H Asahi Edge-Adhesive Curved

    $15.00