• Send Us a Message
    • Ir a contenido
    AMPLUS Replacement Battery – OPPO Find X5 Pro / OnePlus 10 Pro – BLP889 2440mAh 18.88Wh Battery JPC MOBILE ACCESSORIES

    AMPLUS Replacement Battery – OPPO Find X5 Pro / OnePlus 10 Pro – BLP889 2440mAh 18.88Wh

    $0.00 - $0.00
    $0.00
    $38.60
    $38.60 - $38.60
    $38.60
    SKU AMPBR-FindX5Pro
    ⚡ AMPLUS GRADE · BLP889 · 0-CYCLE LITHIUM POLYMER

    AMPLUS Replacement Battery – OPPO Find X5 Pro / OnePlus 10 Pro

    Brand-new 0-cycle AMPLUS lithium-polymer replacement pack for OPPO Find X5 Pro and OnePlus 10 Pro. Genuine BLP889 form-factor — 2440mAh dual-cell at 7.74V, 18.88Wh. New cells, new connector, new PCBA with full overcharge / overheat / short-circuit / overload / temperature protection. RoHS & CE certified. 12-month replacement warranty. Fits OPPO Find X5 Pro (CPH2305 / PFEM10) and OnePlus 10 Pro (NE2210 / NE2211 / NE2213 / NE2215).

    🔋 0-Cycle, Brand New
    ⚡ 18.88Wh / 2440mAh
    🛡️ 12-Month Warranty
    🇦🇺 Brisbane Stock

    📱 Compatibility — BLP889 Form Factor Only

    ✅ FITS — OPPO Find X5 Pro

    CPH2305 — Global / Australia / EU

    PFEM10 — China Mainland

    ✅ FITS — OnePlus 10 Pro

    NE2210 — China Mainland

    NE2211 — India

    NE2213 — EU / Global / Australia / UK

    NE2215 — North America (USA / Canada)

    ❌ DOES NOT FIT

    OnePlus 10T — different chassis, BLP931 battery

    OnePlus 11 — newer model, BLP969 battery

    OnePlus 9 / 9 Pro / 9R — different model, BLP827 / BLP829 battery

    OPPO Find X3 Pro — different model, BLP827 battery

    OPPO Find X6 / X6 Pro — newer model, different pack

    OPPO Find X5 (non-Pro) / Find X5 Lite — different chassis, different battery

    Verify your model number under Settings → About Device → Model Number before ordering. Also check the original battery sticker — it should read BLP889.

    🎯 The AMPLUS Difference

    AMPLUS is a top-tier aftermarket battery brand built specifically for the smartphone repair trade — fresh cells, real PCBA, real protection IC, RoHS & CE certified, 12-month warranty backed. Not a recycled cell, not a re-wrapped pull, not a no-name OEM clone.

    🔋

    0-Cycle Brand-New Cells

    Fresh lithium-polymer cells, never charged. Not pulls, not refurbished, not recycled. Every pack ships with full storage charge ready for first install.

    🧪

    Per-Pack QC Test

    Every battery is capacity-tested at the factory before shipping. Voltage, capacity, and PCBA protection circuits all verified to meet OEM-equivalent standards.

    📜

    RoHS & CE Certified

    AMPLUS manufacturing line is RoHS (no hazardous substances) and CE (European safety) compliant. Documentation backing every batch.

    🛡️

    Six Built-In Protections

    Overcharge, overheat, overload, short-circuit, temperature control, and battery-cell PTC protection — all integrated into the PCBA.

    🔌

    Genuine BLP889 Connector

    Drop-in BLP889 form factor with the correct flex connector. Plugs into the original Find X5 Pro / OnePlus 10 Pro motherboard socket — no adapter needed.

    🛠️

    12-Month Warranty

    Vendor-confirmed 12-month replacement warranty against manufacturing defects — dead pack, capacity failure, PCBA fault.

    💎 AMPLUS vs Generic Aftermarket vs OEM Pull

    Three battery options exist for OPPO Find X5 Pro / OnePlus 10 Pro. Here's the honest comparison so you know exactly what you're buying.

    ✅ AMPLUS (This Product)

    Cell condition: Brand-new, 0 charge cycles

    PCBA: Six built-in protections

    Capacity: Full 2440mAh / 18.88Wh rated

    Certification: RoHS & CE

    Warranty: 12 months

    QC: Per-pack capacity test

    ⚠️ Generic No-Name Aftermarket

    Cell condition: Often unknown — may be recycled

    PCBA: Basic protection or none

    Capacity: Often under-rated, drops fast

    Certification: Usually none

    Warranty: Often DOA-only

    QC: Batch-sample only at best

    📦 OEM Pull (Used)

    Cell condition: Used — already cycled

    PCBA: OEM original

    Capacity: Degraded depending on history

    Certification: Original OEM

    Warranty: Usually none / DOA only

    QC: Visual only

    Bottom line: AMPLUS gives you brand-new 0-cycle cells with proper protection PCBA and a real 12-month warranty — without the OEM-pull degradation lottery and without the no-name generic risk.

    ⚠️ Lithium Battery Safety — Read Before Install

    Lithium-polymer batteries are safe when handled correctly — but a punctured or crushed cell can vent or ignite. Follow these vendor-recommended steps for every BLP889 swap.

    🚫 Never Pry Or Bend

    Use isopropyl alcohol or the supplied pull-tabs to release the adhesive. Never pry under the cell with a metal tool — a puncture can ignite the pack.

    🪫 Drain Old Battery First

    Run the phone down to under 25% before removal. A low-charge cell is much safer to handle if it gets nicked or stressed during removal.

    🌡️ Watch For Bloat

    A swollen / bulging old battery is a fire risk. Take it to a battery recycling drop-off — never bin it. Bring it to JPC Mobile in Forest Lake for free safe disposal.

    ⚙️ Calibrate After Install

    First charge: full charge to 100%, then full discharge to 0%, then full charge again. This calibrates the fuel-gauge IC for accurate percentage reporting.

    If you are not confident with battery removal, book a professional install with the JPC Mobile Forest Lake workshop on 0480 039 913.

    📋 Full Technical Specifications

    Compatible DevicesOPPO Find X5 Pro (CPH2305 / PFEM10) · OnePlus 10 Pro (NE2210 / NE2211 / NE2213 / NE2215)
    Battery ModelBLP889 (genuine OPPO/OnePlus part designation)
    Brand / GradeAMPLUS — top-tier aftermarket replacement
    Cell ChemistryLithium-polymer (Li-Po)
    Cell ConfigurationDual-cell pack in series (2S configuration)
    Capacity2440 mAh (pack rating)
    Voltage7.74V (2 cells × 3.87V nominal)
    Energy18.88 Wh
    Cycle Count0 — brand-new, never charged before shipping
    PCBA ProtectionsOvercharge · Overheat · Overload · Short-circuit · Temperature control · Cell PTC
    ConnectorOEM-spec BLP889 flex connector — drop-in fit
    CertificationsRoHS & CE compliant
    QC TestPer-pack capacity + voltage test before despatch
    Adhesive StripsNOT included — order replacement adhesive separately
    Charging CompatibilityCompatible with original OPPO 80W SuperVOOC / OnePlus 80W SUPERVOOC fast charging
    Wireless ChargingSupports the original OnePlus 50W AIRVOOC / OPPO 50W AIRVOOC wireless charging
    Recommended InstallProfessional repair technician (microsoldering not required, but pack removal needs care)
    Warranty12-month replacement warranty (vendor-confirmed)

    🏆 Why Buy From JPC Mobile

    🔧

    Brisbane Technical Hub

    Operated by repair technicians out of Forest Lake, QLD. Every AMPLUS BLP889 batch is voltage-tested on arrival before going to the shelf. Bad cells never reach a customer.

    ✅

    Authenticity Guaranteed

    Genuine AMPLUS — direct supply chain. Not no-name generic re-wrapped as AMPLUS. Every pack carries the AMPLUS QC label and the BLP889 form factor.

    🚚

    Reliable Dispatch

    2–4 business days nationwide via dangerous-goods compliant courier (lithium battery shipping). Held in Brisbane stock — no offshore drop-ship delays.

    👥 Who This BLP889 Battery Is Built For

    🛠️ Repair Shops

    Stock-line BLP889 with predictable capacity, real PCBA, and a 12-month warranty you can stand behind on the customer ticket.

    🔋 Owners With Battery Drain

    Phone dies before lunch, randomly shuts down at 30%, gets hot when idle, won't hold charge — all classic worn-cell symptoms a fresh BLP889 fixes.

    🧰 Confident DIY Repairers

    Drop-in BLP889 form factor. No microsoldering required. Just heat the rear glass, lift, swap, calibrate. Suits experienced phone repairers with the right tools.

    💼 Resellers / Refurbishers

    Refresh trade-in Find X5 Pro / OnePlus 10 Pro stock with a 0-cycle pack — boosts resale value vs disclosing degraded battery health.

    🔍 Replace Your Battery When You See

    ⏱️ Lasts Half A Day

    A pack that used to last a full day now dies by lunch — capacity has dropped well below the 2440mAh rating.

    ⚡ Random Shutdowns

    Phone dies at 30%, 40%, even 50% — fuel-gauge can't read the worn cell voltage curve correctly.

    🔥 Hot When Idle

    Back glass warms up sitting on the desk doing nothing — internal cell resistance has risen.

    📈 Battery Health Dropped

    Settings shows battery health below 80% — Apple-style degradation curve applies to OnePlus / OPPO too.

    🪫 Slow / Stuck Charging

    SuperVOOC no longer pulls 80W, charge time has doubled, percentage stalls — worn cell limiting current.

    ⚠️ Swollen / Bloated Pack

    Rear glass lifting, screen popping, gap visible at the chassis — STOP using the phone, replace urgently.

    🛠️ Install — 7 Steps (No Microsoldering)

    STEP 1

    Drain & Power Off

    Run the phone down to under 25%. Power it fully off before opening — never open a powered-on phone.

    STEP 2

    Heat & Lift Rear Glass

    Soften the perimeter adhesive with a heat pad (around 60°C). Use a suction cup + opening pick to slowly lift the rear glass — mind the fingerprint scanner flex.

    STEP 3

    Remove Internal Shields

    Unscrew and remove the internal Phillips screws and the wireless-charging coil shield to access the battery and motherboard connector.

    STEP 4

    Disconnect Battery

    Use a plastic spudger to lift the BLP889 connector straight up from the motherboard socket. Never pull on the flex cable itself.

    STEP 5

    Release Old Battery

    Drip a few millilitres of isopropyl alcohol around the cell edges to dissolve the adhesive. Lift evenly with a plastic card. Never pry with a metal blade.

    STEP 6

    Install AMPLUS Pack & Test

    Apply fresh adhesive strips. Seat the new BLP889 pack. Reconnect the flex to the motherboard. Power on and confirm the phone boots and reports a sensible charge level.

    STEP 7

    Reseal & Calibrate

    Refit the rear glass with new waterproof adhesive. First charge to 100%, then run down to 0%, then recharge to 100% — this calibrates the fuel-gauge IC.

    ⚠️ NEVER PUNCTURE. A nicked lithium-polymer cell can vent and ignite. Take your time on Step 5 and use isopropyl, not blades.

    🚚 Australia-Wide Shipping from Brisbane

    📍

    Brisbane Metro

    1–2 business days

    🏙️

    Sydney · Melbourne · Gold Coast

    2–3 business days

    🌏

    Adelaide · Perth · Hobart · Darwin

    3–5 business days

    Lithium batteries ship via dangerous-goods compliant courier. Pay your way — Afterpay and Klarna available at checkout.

    ❓ Frequently Asked Questions

    Will this BLP889 battery fit both the OPPO Find X5 Pro and the OnePlus 10 Pro? +

    Yes. Both phones share the same BLP889 battery pack — same dimensions, same connector, same voltage and capacity. Confirmed across OPPO Find X5 Pro CPH2305 / PFEM10 and OnePlus 10 Pro NE2210 / NE2211 / NE2213 / NE2215.

    Why does this say 2440mAh when the phone was sold as 5000mAh? +

    The BLP889 is a dual-cell pack. 2440mAh is the rating at the pack voltage of 7.74V (two cells in series). The 5000mAh marketing figure is the equivalent capacity at single-cell voltage (3.87V). Same energy — 18.88Wh — just expressed two different ways. Both numbers refer to the same battery.

    Will SuperVOOC 80W fast charging still work? +

    Yes. AMPLUS BLP889 supports the original 80W SuperVOOC / SUPERVOOC wired fast charge and the 50W AIRVOOC wireless charging. The PCBA includes the protection IC needed to negotiate the fast-charge handshake with the OPPO / OnePlus charger.

    Is this brand new or a pull from a used phone? +

    Brand new — 0 charge cycles. Manufactured fresh by AMPLUS, never charged before shipping. This is not a pulled, recycled, or refurbished cell. Each pack arrives with a storage charge ready for first install.

    Do I need to calibrate after install? +

    Yes. After install, charge to 100%, then run the phone down to 0% until it powers off, then charge back to 100%. This single full cycle teaches the fuel-gauge IC the new cell's voltage curve so the percentage display reads accurately.

    Are adhesive strips included? +

    No — the BLP889 pack itself ships without adhesive. Order replacement battery adhesive and rear-glass waterproof adhesive separately if you need them. Most repair shops keep these as bench consumables.

    My phone shutting down at 30% — will this fix it? +

    Almost always, yes. Random shutdowns at high charge percentages are the classic sign of a worn cell whose voltage drops too far under load. A fresh BLP889 with 0 cycles restores the proper voltage-curve behaviour and the shutdowns stop.

    What if my old battery is swollen? +

    Stop using the phone. A bloated lithium pack is a fire risk. Bring the phone to JPC Mobile in Forest Lake — we will safely remove and dispose of the old cell free of charge, and install your new AMPLUS BLP889 if you bring it in. Never throw a swollen battery in household rubbish.

    Can I install this myself, or do I need a repair shop? +

    DIY is possible if you have heat-pad, suction-cup, plastic picks, isopropyl alcohol, and Phillips screwdrivers — and you've opened a glued-back smartphone before. If you have not, professional install is recommended. The OPPO Find X5 Pro / OnePlus 10 Pro rear glass is bonded with strong waterproof adhesive and is unforgiving of metal pry tools near the cell.

    What does the 12-month warranty cover? +

    Manufacturing defects: dead pack, capacity well below rated 18.88Wh, PCBA / protection IC failure, charging fault. Excludes physical damage, punctures, water ingress, or installation mistakes. Test the battery boots and reports a sensible charge level before resealing the rear glass — install faults are not covered.

    Browse Related Categories
    Repair Tools
    🛡️

    The JPC Mobile Quality Seal

    Held in stock at Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Voltage-tested by working repair technicians before listing. 12-month warranty on every AMPLUS BLP889. Australia-wide shipping with tracking via dangerous-goods compliant courier.

    🇦🇺
    Brisbane Stock
    ⚡
    2–4 Day Dispatch
    🛡️
    12-Month Warranty
    📞
    0480 039 913

    Payment Options

    We offer multiple convenient payment options for your repairs and accessories purchases. Pay with cash, debit/credit card, or interest-free Buy Now Pay Later options.

    Afterpay Zip Klarna PayPal
    Learn more about our Buy Now, Pay Later options →

    Shipping & Processing Information

    Processing Time

    All orders require 2-4 business days for processing, regardless of shipping method.

    This includes order verification, picking, packing and preparation for dispatch.

    You will receive tracking information for all shipped orders and notification when pickup orders are ready for collection.

    Shipping Methods

    Standard: 3-7 business days in transit after processing

    Express: 1-2 business days in transit after processing

    Express shipping only affects delivery time once dispatched, not processing time.

    Express shipping does not expedite the 2-4 business day processing time.

    AMPLUS Replacement Battery – OPPO Find X5 Pro / OnePlus 10 Pro – BLP889 2440mAh 18.88Wh Battery JPC MOBILE ACCESSORIES

    AMPLUS Replacement Battery – OPPO Find X5 Pro / OnePlus 10 Pro – BLP889 2440mAh 18.88Wh

    $38.60